| 套件 | spark.transitions |
| 類別 | public class ViewTransitionBase |
| 繼承 | ViewTransitionBase  EventDispatcher Object |
| 子類別 | CrossFadeViewTransition, FlipViewTransition, SlideViewTransition, ZoomViewTransition |
| 語言版本: | ActionScript 3.0 |
| 產品版本: | Flex 4.5 |
| 執行階段版本: | AIR 2.5 |
When a view transition is initialized, the owning view navigator
sets the startView and endView properties
to the views the transition animates.
The navigator property is
set to the view navigator.
The lifecycle of a transition is as follows:
- The transition starts with
the
captureStartValues()method. When this method is called, the navigator is currently in the start state. At this time, the transition should capture any start values or bitmaps that it requires. - A validation pass is performed on the pending
view, and the
captureEndValues()method is called. At this time, the transition captures any properties or bitmaps representations from the pending view. - The
prepareForPlay()method is then called, which allows the transition to perform any further preparations, such as preparing a Spark effects sequence, or positioning transient elements on the display list. - After a final validation pass, if necessary,
the
play()method is called by the navigator to perform the actual transition. - Prior to any animation starting, the
startevent is dispatched. - When a transition completes, it dispatches an
endevent.
Note:Create and configure view transitions in ActionScript; you cannot create them in MXML.
隱藏繼承公用屬性
顯示繼承公用屬性| 屬性 | 定義自 | ||
|---|---|---|---|
 | constructor : Object
類別物件的參照或是特定物件實體的建構函數。 | Object | |
| duration : Number
Duration of the transition, in milliseconds. | ViewTransitionBase | ||
| easer : IEaser
The easing behavior for this transition. | ViewTransitionBase | ||
| endView : View
The view that the navigator is transitioning
to, as set by the owning ViewNavigator object. | ViewTransitionBase | ||
| navigator : ViewNavigator
Reference to the owning ViewNavigator instance set by the owning
ViewNavigator. | ViewTransitionBase | ||
| startView : View
The currently active view of the view navigator,
as set by the owning view navigator. | ViewTransitionBase | ||
| suspendBackgroundProcessing : Boolean
When set to true, the UIComponent.suspendBackgroundProcessing()
method is invoked prior to the transition playing. | ViewTransitionBase | ||
| transitionControlsWithContent : Boolean
When set to true, the primary view transition
is used to transition the view navigator in its entirety,
including the action bar. | ViewTransitionBase | ||
| 方法 | 定義自 | ||
|---|---|---|---|
Constructor. | ViewTransitionBase | ||
| addEventListener(type:String, listener:Function, useCapture:Boolean = false, priority:int = 0, useWeakReference:Boolean = false):void
會在 EventDispatcher 物件註冊事件偵聽程式，以便讓偵聽程式收到事件的通知。 | EventDispatcher | |
Called by the ViewNavigator during the preparation phase of a transition. | ViewTransitionBase | ||
Called by the ViewNavigator during the preparation phase of a transition. | ViewTransitionBase | ||
|
會將事件傳送到事件流程。 | EventDispatcher | |
|
會檢查 EventDispatcher 物件是否有對特定的事件類型註冊偵聽程式。 | EventDispatcher | |
|
指出物件是否有已定義的指定屬性。 | Object | |
|
指出 Object 類別的實體是否位於指定為參數的物件原型鏈中。 | Object | |
Called by the ViewNavigator when the transition
should begin animating. | ViewTransitionBase | ||
Called by the ViewNavigator during the preparation phase
of a transition. | ViewTransitionBase | ||
|
指出指定的屬性是否存在，以及是否可列舉。 | Object | |
|
會從 EventDispatcher 物件移除偵聽程式。 | EventDispatcher | |
|
為迴圈作業設定動態屬性的可用性。 | Object | |
|
傳回代表此物件的字串，根據地區特定慣例進行格式化。 | Object | |
|
會傳回指定之物件的字串形式。 | Object | |
|
會傳回指定之物件的基本值。 | Object | |
|
檢查此 EventDispatcher 物件是否已註冊事件偵聽程式，或者此物件的任何祖系已為特定事件類型註冊事件偵聽程式。 | EventDispatcher | |
| 方法 | 定義自 | ||
|---|---|---|---|
Determine if Flex can perform a transition on
action bar or tab bar content independently of the views. | ViewTransitionBase | ||
Called after the transition completes. | ViewTransitionBase | ||
Called by the default prepareForPlay() implementation,
this method is responsible for creating the Spark effect
played on the action bar when the transition starts. | ViewTransitionBase | ||
Called by the default prepareForPlay() implementation,
this method is responsible for creating the Spark effect played to
transition the entire navigator, inclusive of the control bar content,
when necessary. | ViewTransitionBase | ||
Called by the default prepareForPlay() implementation,
this method is responsible for creating the Spark effect played
on the tab bar when the transition starts. | ViewTransitionBase | ||
Called by the default prepareForPlay() implementation,
this method is responsible for creating the Spark effect played
on the current and next view when the transition starts. | ViewTransitionBase | ||
Used to render snap shots of screen elements in
preparation for transitioning. | ViewTransitionBase | ||
Called by the transition to indicate that the transition
has completed. | ViewTransitionBase | ||
| 事件 | 摘要 | 定義自 | ||
|---|---|---|---|---|
| [廣播事件] 當 Flash Player 或 AIR 應用程式取得作業系統焦點並成為作用中時傳送。 | EventDispatcher | ||
| [廣播事件] 當 Flash Player 或 AIR 應用程式失去作業系統焦點並成為非作用中時傳送。 | EventDispatcher | ||
| Dispatched when the transition completes. | ViewTransitionBase | |||
| Dispatched when the transition starts. | ViewTransitionBase | |||
duration | 屬性 |
easer | 屬性 |
easer:IEaser| 語言版本: | ActionScript 3.0 |
| 產品版本: | Flex 4.5 |
| 執行階段版本: | AIR 2.5 |
The easing behavior for this transition. The IEaser object is generally propagated to the IEffect instance managing the actual transition animation.
預設值為 Sine(.5);。
實作
public function get easer():IEaser public function set easer(value:IEaser):void相關 API 元素
endView | 屬性 |
navigator | 屬性 |
navigator:ViewNavigator| 語言版本: | ActionScript 3.0 |
| 產品版本: | Flex 4.5 |
| 執行階段版本: | AIR 2.5 |
Reference to the owning ViewNavigator instance set by the owning ViewNavigator.
預設值為 null。
實作
public function get navigator():ViewNavigator public function set navigator(value:ViewNavigator):void startView | 屬性 |
suspendBackgroundProcessing | 屬性 |
suspendBackgroundProcessing:Boolean| 語言版本: | ActionScript 3.0 |
| 產品版本: | Flex 4.5 |
| 執行階段版本: | AIR 2.5 |
When set to true, the UIComponent.suspendBackgroundProcessing()
method is invoked prior to the transition playing.
This disables Flex's layout manager and improving performance.
Upon completion of the transition,
the layout manager function is restored by a call to the
UIComponent.resumeBackgroundProcessing() method.
預設值為 false。
實作
public function get suspendBackgroundProcessing():Boolean public function set suspendBackgroundProcessing(value:Boolean):void相關 API 元素
transitionControlsWithContent | 屬性 |
transitionControlsWithContent:Boolean| 語言版本: | ActionScript 3.0 |
| 產品版本: | Flex 4.5 |
| 執行階段版本: | AIR 2.5 |
When set to true, the primary view transition
is used to transition the view navigator in its entirety,
including the action bar.
Specific transitions for the action bar are not performed.
Because the tab bar is associated with the entire application,
and not a view, view transitions do not affect it.
Note that even when set to false, there are cases
where its not feasible to transition the action bar.
For example, when the action bar does not exist in one of
the two views, or if the action bar changes size.
預設值為 false。
實作
public function get transitionControlsWithContent():Boolean public function set transitionControlsWithContent(value:Boolean):void ViewTransitionBase | () | 建構函式 |
public function ViewTransitionBase()| 語言版本: | ActionScript 3.0 |
| 產品版本: | Flex 4.5 |
| 執行階段版本: | AIR 2.5 |
Constructor.
canTransitionControlBarContent | () | 方法 |
protected function canTransitionControlBarContent():Boolean| 語言版本: | ActionScript 3.0 |
| 產品版本: | Flex 4.5 |
| 執行階段版本: | AIR 2.5 |
Determine if Flex can perform a transition on action bar or tab bar content independently of the views.
Flex cannot perform a transition on the control bars independently:
- If the containing view navigator is a TabbedViewNavigator and its tab bar's visibility changes between views.
- If the value of the view navigator's
overlayControlsproperty changes between views. - If the size or visibility of the action bar changes between views.
Boolean — false if Flex determines controls bars between views are
incompatible in some way.
|
captureEndValues | () | 方法 |
public function captureEndValues():void| 語言版本: | ActionScript 3.0 |
| 產品版本: | Flex 4.5 |
| 執行階段版本: | AIR 2.5 |
Called by the ViewNavigator during the preparation phase of a transition. It is invoked when the new view has been fully realized and validated and the action bar and tab bar content reflect the state of the new view. It is at this point that the transition can capture any values it requires from the pending view. In addition any bitmaps reflecting the state of the new view, tab bar, or action bar should be captured, if required for animation.
captureStartValues | () | 方法 |
public function captureStartValues():void| 語言版本: | ActionScript 3.0 |
| 產品版本: | Flex 4.5 |
| 執行階段版本: | AIR 2.5 |
Called by the ViewNavigator during the preparation phase of a transition. It is invoked when the new view has been fully realized and validated and the action bar and tab bar content reflect the state of the new view. The transition can use this method capture any values it requires from the pending view. Any bitmaps reflecting the state of the new view, tab bar, or action bar should be captured if required for animation.
cleanUp | () | 方法 |
protected function cleanUp():void| 語言版本: | ActionScript 3.0 |
| 產品版本: | Flex 4.5 |
| 執行階段版本: | AIR 2.5 |
Called after the transition completes. This method is responsible for releasing any references and temporary constructs used by the transition.
createActionBarEffect | () | 方法 |
protected function createActionBarEffect():IEffect| 語言版本: | ActionScript 3.0 |
| 產品版本: | Flex 4.5 |
| 執行階段版本: | AIR 2.5 |
Called by the default prepareForPlay() implementation,
this method is responsible for creating the Spark effect
played on the action bar when the transition starts.
This method should be overridden by subclasses if a custom action bar
effect is required.
By default, this method returns a basic action bar effect.
IEffect — An IEffect instance serving as the action bar effect.
This effect is played by the default play() method implementation.
|
createConsolidatedEffect | () | 方法 |
protected function createConsolidatedEffect():IEffect| 語言版本: | ActionScript 3.0 |
| 產品版本: | Flex 4.5 |
| 執行階段版本: | AIR 2.5 |
Called by the default prepareForPlay() implementation,
this method is responsible for creating the Spark effect played to
transition the entire navigator, inclusive of the control bar content,
when necessary.
This method should be overridden by subclasses.
By default, this method returns null.
IEffect — An IEffect instance serving as the view transition.
This effect is played by the default play() method implementation.
|
createTabBarEffect | () | 方法 |
protected function createTabBarEffect():IEffect| 語言版本: | ActionScript 3.0 |
| 產品版本: | Flex 4.5 |
| 執行階段版本: | AIR 2.5 |
Called by the default prepareForPlay() implementation,
this method is responsible for creating the Spark effect played
on the tab bar when the transition starts.
This method should be overridden by subclasses.
By default, this returns null.
IEffect — An IEffect instance serving as the tab bar transition.
This effect is played by the default play() method implementation.
|
createViewEffect | () | 方法 |
protected function createViewEffect():IEffect| 語言版本: | ActionScript 3.0 |
| 產品版本: | Flex 4.5 |
| 執行階段版本: | AIR 2.5 |
Called by the default prepareForPlay() implementation,
this method is responsible for creating the Spark effect played
on the current and next view when the transition starts.
This method should be overridden by subclasses.
By default, this method returns null.
IEffect — An IEffect instance serving as the view transition.
This effect is played by the default play() method implementation.
|
getSnapshot | () | 方法 |
protected function getSnapshot(target:UIComponent, padding:int = 4, globalPosition:Point = null):BitmapImage| 語言版本: | ActionScript 3.0 |
| 產品版本: | Flex 4.5 |
| 執行階段版本: | AIR 2.5 |
Used to render snap shots of screen elements in preparation for transitioning. The bitmap is returned in the form of a BitmapImage object.
The BitmapImage is in target's parent coordiantes space -
it overlaps the target precisely if paranted to the same parent.
When moving to a different parent, make sure to adjust the
transformation of the BitmapImage to correctly account for the
change in coordinate spaces.
The updated value of the globalPosition parameter
can be used for that.
參數
target:UIComponent — Display object to capture.
| |
padding:int (default = 4) | |
globalPosition:Point (default = null)globalPosition
will be updated with the origin of the BitmapImage in global
coordiantes. When moving to a different coordinate space, this
value can be used to adjust the snapshot's position so its
global position on screen doesn't change.
|
BitmapImage — BitmapImage object representing the target.
|
play | () | 方法 |
public function play():void| 語言版本: | ActionScript 3.0 |
| 產品版本: | Flex 4.5 |
| 執行階段版本: | AIR 2.5 |
Called by the ViewNavigator when the transition
should begin animating.
At this time, the transition should dispatch a
start event.
prepareForPlay | () | 方法 |
public function prepareForPlay():void| 語言版本: | ActionScript 3.0 |
| 產品版本: | Flex 4.5 |
| 執行階段版本: | AIR 2.5 |
Called by the ViewNavigator during the preparation phase
of a transition.
This method gives the transition the chance to create and
configure the underlying IEffect instance, or to add any transient
elements to the display list.
Example transient elements include bitmap placeholders, temporary
containers required during the transition, and other elements.
If required, a final validation pass occurs prior to the invocation
of the play() method.
If it is determined that a standard transition can be initiated,
meaning one that transitions the control bars separately from the views,
the default implementation of this method constructs
a single Parallel effect which wraps the individual effect sequences
for the view transition, the action bar transition, and the tab bar transition.
This method uses the methods, createActionBarEffect(),
createTabBarEffect(), and createViewEffect().
If transitionControlsWithContent is set to true,
or if it is determined that the control bars cannot be transitioned independently,
a single effect is created to transition the navigator in its entirety.
In this case, only createConsolidatedEffect() is invoked.
transitionComplete | () | 方法 |
protected function transitionComplete():void| 語言版本: | ActionScript 3.0 |
| 產品版本: | Flex 4.5 |
| 執行階段版本: | AIR 2.5 |
Called by the transition to indicate that the transition
has completed.
This method dispatches the end event.
transitionEnd | 事件 |
mx.events.FlexEvent屬性 FlexEvent.type =
mx.events.FlexEvent.TRANSITION_START| 語言版本: | ActionScript 3.0 |
| 產品版本: | Flex 4.5 |
| 執行階段版本: | AIR 2.5 |
Dispatched when the transition completes.
TheFlexEvent.TRANSITION_START constant defines the value of the
type property of the event object for a transitionStart event.
This event will only be dispatched when there are one or more relevant listeners attached to the dispatching object.
The properties of the event object have the following values:
| Property | Value |
|---|---|
bubbles | false |
cancelable | false |
currentTarget | The Object that defines the
event listener that handles the event. For example, if you use
myButton.addEventListener() to register an event listener,
myButton is the value of the currentTarget. |
target | The Object that dispatched the event;
it is not always the Object listening for the event.
Use the currentTarget property to always access the
Object listening for the event. |
transitionStart | 事件 |
mx.events.FlexEvent屬性 FlexEvent.type =
mx.events.FlexEvent.TRANSITION_START| 語言版本: | ActionScript 3.0 |
| 產品版本: | Flex 4.5 |
| 執行階段版本: | AIR 2.5 |
Dispatched when the transition starts.
TheFlexEvent.TRANSITION_START constant defines the value of the
type property of the event object for a transitionStart event.
This event will only be dispatched when there are one or more relevant listeners attached to the dispatching object.
The properties of the event object have the following values:
| Property | Value |
|---|---|
bubbles | false |
cancelable | false |
currentTarget | The Object that defines the
event listener that handles the event. For example, if you use
myButton.addEventListener() to register an event listener,
myButton is the value of the currentTarget. |
target | The Object that dispatched the event;
it is not always the Object listening for the event.
Use the currentTarget property to always access the
Object listening for the event. |
Tue Jun 12 2018, 03:47 PM Z