NumberValidator

패키지	mx.validators
클래스	public class NumberValidator
상속	NumberValidator Validator EventDispatcher Object

언어 버전:

ActionScript 3.0

제품 버전:

Flex 3

런타임 버전:

Flash Player 9, AIR 1.1

Flex 4.5(으)로 시작하는 경우 이 클래스 대신 spark.validators.NumberValidator 클래스를 사용하는 것이 좋습니다.

The NumberValidator class ensures that a String represents a valid number. It can ensure that the input falls within a given range (specified by minValue and maxValue), is an integer (specified by domain), is non-negative (specified by allowNegative), and does not exceed the specified precision. The validator correctly validates formatted numbers (e.g., "12,345.67") and you can customize the thousandsSeparator and decimalSeparator properties for internationalization.

MXML 구문

MXML 구문 숨기기

The <mx:NumberValidator> tag inherits all of the tag attributes of its superclass, and adds the following tag attributes:

  <mx:NumberValidator 
    allowNegative="true|false" 
    decimalPointCountError="The decimal separator can only occur once." 
    decimalSeparator="." 
    domain="real|int" 
    exceedsMaxError="The number entered is too large." 
    integerError="The number must be an integer." 
    invalidCharError="The input contains invalid characters." 
    invalidFormatCharsError="One of the formatting parameters is invalid." 
    lowerThanMinError="The amount entered is too small." 
    maxValue="NaN" 
    minValue="NaN" 
    negativeError="The amount may not be negative." 
    precision="-1" 
    precisionError="The amount entered has too many digits beyond the decimal point." 
    separationError="The thousands separator must be followed by three digits." 
    thousandsSeparator="," 
  />

예제 보기

공용 속성

상속되는 공용 속성 숨기기

상속되는 공용 속성 표시

	속성		정의 주체
		allowNegative : Object Specifies whether negative numbers are permitted.	NumberValidator
		constructor : Object 지정된 객체 인스턴스의 클래스 객체 또는 생성자 함수에 대한 참조입니다.	Object
		decimalPointCountError : String Error message when the decimal separator character occurs more than once.	NumberValidator
		decimalSeparator : String The character used to separate the whole from the fractional part of the number.	NumberValidator
		domain : String Type of number to be validated.	NumberValidator
		enabled : Boolean Setting this value to false will stop the validator from performing validation.	Validator
		exceedsMaxError : String Error message when the value exceeds the maxValue property.	NumberValidator
		integerError : String Error message when the number must be an integer, as defined by the domain property.	NumberValidator
		invalidCharError : String Error message when the value contains invalid characters.	NumberValidator
		invalidFormatCharsError : String Error message when the value contains invalid format characters, which means that it contains a digit or minus sign (-) as a separator character, or it contains two or more consecutive separator characters.	NumberValidator
		listener : Object Specifies the validation listener.	Validator
		lowerThanMinError : String Error message when the value is less than minValue.	NumberValidator
		maxValue : Object Maximum value for a valid number.	NumberValidator
		minValue : Object Minimum value for a valid number.	NumberValidator
		negativeError : String Error message when the value is negative and the allowNegative property is false.	NumberValidator
		precision : Object The maximum number of digits allowed to follow the decimal point.	NumberValidator
		precisionError : String Error message when the value has a precision that exceeds the value defined by the precision property.	NumberValidator
		property : String A String specifying the name of the property of the source object that contains the value to validate.	Validator
		required : Boolean = true If true, specifies that a missing or empty value causes a validation error.	Validator
		requiredFieldError : String Error message when a value is missing and the required property is true.	Validator
		separationError : String Error message when the thousands separator is in the wrong location.	NumberValidator
		source : Object Specifies the object containing the property to validate.	Validator
		thousandsSeparator : String The character used to separate thousands in the whole part of the number.	NumberValidator
		trigger : IEventDispatcher Specifies the component generating the event that triggers the validator.	Validator
		triggerEvent : String Specifies the event that triggers the validation.	Validator

보호 속성

상속되는 보호 속성 숨기기

상속되는 보호 속성 표시

	속성		정의 주체
		actualListeners : Array [읽기 전용] Contains an Array of listener objects, if any, or the source object.	Validator
		actualTrigger : IEventDispatcher [읽기 전용] Contains the trigger object, if any, or the source object.	Validator
		resourceManager : IResourceManager [읽기 전용] A reference to the object which manages all of the application's localized resources.	Validator
		subFields : Array An Array of Strings containing the names for the properties contained in the value Object passed to the validate() method.	Validator

공용 메서드

상속되는 공용 메서드 숨기기

상속되는 공용 메서드 표시

	메서드		정의 주체
		NumberValidator() Constructor.	NumberValidator
		addEventListener(type:String, listener:Function, useCapture:Boolean = false, priority:int = 0, useWeakReference:Boolean = false):void 리스너에서 이벤트 알림을 받을 수 있도록 EventDispatcher 객체에 이벤트 리스너 객체를 등록합니다.	EventDispatcher
		dispatchEvent(event:Event):Boolean 이벤트를 이벤트 흐름으로 전달합니다.	EventDispatcher
		hasEventListener(type:String):Boolean EventDispatcher 객체에 특정 유형의 이벤트에 대한 리스너가 등록되어 있는지 여부를 확인합니다.	EventDispatcher
		hasOwnProperty(name:String):Boolean 지정된 속성이 객체에 정의되어 있는지 여부를 나타냅니다.	Object
		initialized(document:Object, id:String):void Called automatically by the MXML compiler when the Validator is created using an MXML tag.	Validator
		isPrototypeOf(theClass:Object):Boolean Object 클래스의 인스턴스가 매개 변수로 지정된 객체의 프로토타입 체인에 있는지 여부를 나타냅니다.	Object
		propertyIsEnumerable(name:String):Boolean 지정된 속성이 존재하고 열거 가능한지 여부를 나타냅니다.	Object
		removeEventListener(type:String, listener:Function, useCapture:Boolean = false):void EventDispatcher 객체에서 리스너를 제거합니다.	EventDispatcher
		setPropertyIsEnumerable(name:String, isEnum:Boolean = true):void 루프 작업에서 동적 속성을 사용할 수 있는지 여부를 설정합니다.	Object
		toLocaleString():String 로캘별 규칙에 따라 서식이 지정된 이 객체의 문자열 표현을 반환합니다.	Object
		toString():String 지정된 객체의 문자열 표현을 반환합니다.	Object
		validate(value:Object = null, suppressEvents:Boolean = false):ValidationResultEvent Performs validation and optionally notifies the listeners of the result.	Validator
		validateAll(validators:Array):Array [정적] Invokes all the validators in the validators Array.	Validator
		validateNumber(validator:NumberValidator, value:Object, baseField:String):Array [정적] Convenience method for calling a validator from within a custom validation function.	NumberValidator
		valueOf():Object 지정된 객체의 프리미티브 값을 반환합니다.	Object
		willTrigger(type:String):Boolean 이 EventDispatcher 객체 또는 조상 객체에 지정한 이벤트 유형에 대한 이벤트 리스너가 등록되어 있는지 여부를 확인합니다.	EventDispatcher

보호 메서드

상속되는 보호 메서드 숨기기

상속되는 보호 메서드 표시

	메서드		정의 주체
		addListenerHandler():void Sets up all of the listeners for the valid and invalid events dispatched from the validator.	Validator
		doValidation(value:Object):Array [재정의] Override of the base class doValidation() method to validate a number.	NumberValidator
		getValueFromSource():Object Returns the Object to validate.	Validator
		handleResults(errorResults:Array):ValidationResultEvent Returns a ValidationResultEvent from the Array of error results.	Validator
		isRealValue(value:Object):Boolean Returns true if value is not null.	Validator
		removeListenerHandler():void Disconnects all of the listeners for the valid and invalid events dispatched from the validator.	Validator
		resourcesChanged():void This method is called when a Validator is constructed, and again whenever the ResourceManager dispatches a "change" Event to indicate that the localized resources have changed in some way.	Validator

이벤트

이벤트에 대한 자세한 내용을 보려면 클릭하십시오.

상속되는 이벤트 숨기기

상속되는 이벤트 표시

	요약	정의 주체
activate	[브로드캐스트 이벤트] Flash Player 또는 AIR 응용 프로그램이 운영 체제 포커스를 얻어 활성화될 때 전달됩니다.	EventDispatcher
deactivate	[브로드캐스트 이벤트] Flash Player 또는 AIR 응용 프로그램이 운영 체제 포커스를 잃고 비활성화될 때 전달됩니다.	EventDispatcher
invalid	Dispatched when validation fails.	Validator
valid	Dispatched when validation succeeds.	Validator

보호 상수

상속되는 보호 상수 숨기기

상속되는 보호 상수 표시

	상수		정의 주체

속성 세부 정보

allowNegative

속성

allowNegative:Object

언어 버전:

ActionScript 3.0

제품 버전:

Flex 3

런타임 버전:

Flash Player 9, AIR 1.1

Specifies whether negative numbers are permitted. Valid values are true or false.

기본값: true.

구현
public function get allowNegative():Object
public function set allowNegative(value:Object):void

decimalPointCountError

속성

decimalPointCountError:String

언어 버전:

ActionScript 3.0

제품 버전:

Flex 3

런타임 버전:

Flash Player 9, AIR 1.1

Error message when the decimal separator character occurs more than once.

기본값: "The decimal separator can occur only once.".

구현
public function get decimalPointCountError():String
public function set decimalPointCountError(value:String):void

decimalSeparator

속성

decimalSeparator:String

언어 버전:

ActionScript 3.0

제품 버전:

Flex 3

런타임 버전:

Flash Player 9, AIR 1.1

The character used to separate the whole from the fractional part of the number. Cannot be a digit and must be distinct from the thousandsSeparator.

기본값: ".".

구현
public function get decimalSeparator():String
public function set decimalSeparator(value:String):void

domain

속성

domain:String

언어 버전:

ActionScript 3.0

제품 버전:

Flex 3

런타임 버전:

Flash Player 9, AIR 1.1

Type of number to be validated. Permitted values are "real" and "int".

In ActionScript, you can use the following constants to set this property: NumberValidatorDomainType.REAL or NumberValidatorDomainType.INT.

기본값: "real".

구현
public function get domain():String
public function set domain(value:String):void

exceedsMaxError

속성

exceedsMaxError:String

언어 버전:

ActionScript 3.0

제품 버전:

Flex 3

런타임 버전:

Flash Player 9, AIR 1.1

Error message when the value exceeds the maxValue property.

기본값: "The number entered is too large.".

구현
public function get exceedsMaxError():String
public function set exceedsMaxError(value:String):void

integerError

속성

integerError:String

언어 버전:

ActionScript 3.0

제품 버전:

Flex 3

런타임 버전:

Flash Player 9, AIR 1.1

Error message when the number must be an integer, as defined by the domain property.

기본값: "The number must be an integer.".

구현
public function get integerError():String
public function set integerError(value:String):void

invalidCharError

속성

invalidCharError:String

언어 버전:

ActionScript 3.0

제품 버전:

Flex 3

런타임 버전:

Flash Player 9, AIR 1.1

Error message when the value contains invalid characters.

기본값: The input contains invalid characters.".

구현
public function get invalidCharError():String
public function set invalidCharError(value:String):void

invalidFormatCharsError

속성

invalidFormatCharsError:String

언어 버전:

ActionScript 3.0

제품 버전:

Flex 3

런타임 버전:

Flash Player 9, AIR 1.1

Error message when the value contains invalid format characters, which means that it contains a digit or minus sign (-) as a separator character, or it contains two or more consecutive separator characters.

기본값: "One of the formatting parameters is invalid.".

구현
public function get invalidFormatCharsError():String
public function set invalidFormatCharsError(value:String):void

lowerThanMinError

속성

lowerThanMinError:String

언어 버전:

ActionScript 3.0

제품 버전:

Flex 3

런타임 버전:

Flash Player 9, AIR 1.1

Error message when the value is less than minValue.

기본값: "The amount entered is too small.".

구현
public function get lowerThanMinError():String
public function set lowerThanMinError(value:String):void

maxValue

속성

maxValue:Object

언어 버전:

ActionScript 3.0

제품 버전:

Flex 3

런타임 버전:

Flash Player 9, AIR 1.1

Maximum value for a valid number. A value of NaN means there is no maximum.

기본값: NaN.

구현
public function get maxValue():Object
public function set maxValue(value:Object):void

minValue

속성

minValue:Object

언어 버전:

ActionScript 3.0

제품 버전:

Flex 3

런타임 버전:

Flash Player 9, AIR 1.1

Minimum value for a valid number. A value of NaN means there is no minimum.

기본값: NaN.

구현
public function get minValue():Object
public function set minValue(value:Object):void

negativeError

속성

negativeError:String

언어 버전:

ActionScript 3.0

제품 버전:

Flex 3

런타임 버전:

Flash Player 9, AIR 1.1

Error message when the value is negative and the allowNegative property is false.

기본값: "The amount may not be negative.".

구현
public function get negativeError():String
public function set negativeError(value:String):void

precision

속성

precision:Object

언어 버전:

ActionScript 3.0

제품 버전:

Flex 3

런타임 버전:

Flash Player 9, AIR 1.1

The maximum number of digits allowed to follow the decimal point. Can be any nonnegative integer. Note: Setting to 0 has the same effect as setting domain to "int". A value of -1 means it is ignored.

기본값: -1.

구현
public function get precision():Object
public function set precision(value:Object):void

precisionError

속성

precisionError:String

언어 버전:

ActionScript 3.0

제품 버전:

Flex 3

런타임 버전:

Flash Player 9, AIR 1.1

Error message when the value has a precision that exceeds the value defined by the precision property.

기본값: "The amount entered has too many digits beyond the decimal point.".

구현
public function get precisionError():String
public function set precisionError(value:String):void

separationError

속성

separationError:String

언어 버전:

ActionScript 3.0

제품 버전:

Flex 3

런타임 버전:

Flash Player 9, AIR 1.1

Error message when the thousands separator is in the wrong location.

기본값: "The thousands separator must be followed by three digits.".

구현
public function get separationError():String
public function set separationError(value:String):void

thousandsSeparator

속성

thousandsSeparator:String

언어 버전:

ActionScript 3.0

제품 버전:

Flex 3

런타임 버전:

Flash Player 9, AIR 1.1

The character used to separate thousands in the whole part of the number. Cannot be a digit and must be distinct from the decimalSeparator.

기본값: ",".

구현
public function get thousandsSeparator():String
public function set thousandsSeparator(value:String):void

생성자 세부 정보

()

생성자

public function NumberValidator()

언어 버전:

ActionScript 3.0

제품 버전:

Flex 3

런타임 버전:

Flash Player 9, AIR 1.1

Constructor.

메서드 세부 정보

doValidation

()

메서드

override protected function doValidation(value:Object):Array

언어 버전:

ActionScript 3.0

제품 버전:

Flex 3

런타임 버전:

Flash Player 9, AIR 1.1

Override of the base class doValidation() method to validate a number.

You do not call this method directly; Flex calls it as part of performing a validation. If you create a custom Validator class, you must implement this method.

매개 변수

value:Object — Object to validate.

반환값

Array — An Array of ValidationResult objects, with one ValidationResult object for each field examined by the validator.

validateNumber

()

메서드

public static function validateNumber(validator:NumberValidator, value:Object, baseField:String):Array

언어 버전:

ActionScript 3.0

제품 버전:

Flex 3

런타임 버전:

Flash Player 9, AIR 1.1

Convenience method for calling a validator from within a custom validation function. Each of the standard Flex validators has a similar convenience method.

매개 변수

	`validator:NumberValidator` — The NumberValidator instance.

	`value:Object` — A field to validate.

	`baseField:String` — Text representation of the subfield specified in the `value` parameter. For example, if the `value` parameter specifies value.number, the `baseField` value is "number".

반환값

Array — An Array of ValidationResult objects, with one ValidationResult object for each field examined by the validator.

NumberValidator - AS3 Flex

클래스 x

allowNegative

decimalPointCountError

decimalSeparator

domain

exceedsMaxError

integerError

invalidCharError

invalidFormatCharsError

lowerThanMinError

maxValue

minValue

negativeError

precision

precisionError

separationError

thousandsSeparator