套件 | spark.filters |
類別 | public class BlurFilter |
繼承 | BlurFilter BaseFilter EventDispatcher Object |
實作 | IBitmapFilter |
語言版本: | ActionScript 3.0 |
產品版本: | Flex 4 |
執行階段版本: | Flash Player 10, AIR 1.5 |
quality
property
of this filter is set to low, the result is a softly unfocused look.
When the quality
property is set to high, it approximates a Gaussian blur
filter. You can apply the filter to any display object (that is, objects that inherit
from the DisplayObject class),
such as MovieClip, SimpleButton, TextField, and Video objects, as well as to BitmapData objects.
To create a new filter, use the constructor new BlurFilter()
.
The use of filters depends on the object to which you apply the filter:
- To apply filters to movie clips, text fields, buttons, and video, use the
filters
property (inherited from DisplayObject). Setting thefilters
property of an object does not modify the object, and you can remove the filter by clearing thefilters
property. - To apply filters to BitmapData objects, use the
BitmapData.applyFilter()
method. CallingapplyFilter()
on a BitmapData object takes the source BitmapData object and the filter object and generates a filtered image as a result.
If you apply a filter to a display object, the cacheAsBitmap
property of the
display object is set to true
. If you remove all filters, the original value of
cacheAsBitmap
is restored.
This filter supports Stage scaling. However, it does not support general scaling,
rotation, and skewing. If the object itself is scaled (scaleX
and scaleY
are not set to 100%), the
filter effect is not scaled. It is scaled only when the user zooms in on the Stage.
A filter is not applied if the resulting image exceeds the maximum dimensions. In AIR 1.5 and Flash Player 10, the maximum is 8,191 pixels in width or height, and the total number of pixels cannot exceed 16,777,215 pixels. (So, if an image is 8,191 pixels wide, it can only be 2,048 pixels high.) If, for example, you zoom in on a large movie clip with a filter applied, the filter is turned off if the resulting image exceeds the maximum dimensions.
MXML 語法隱藏 MXML 語法The <s:BlurFilter>
tag inherits all of the tag
attributes of its superclass and adds the following tag attributes:
<s:BlurFilter Properties blurX="4.0" blurY="4.0" quality="low" />
更多範例
相關 API 元素
flash.display.DisplayObject.filters
flash.display.DisplayObject.cacheAsBitmap
flash.display.BitmapData.applyFilter()
屬性 | 定義自 | ||
---|---|---|---|
blurX : Number
The amount of horizontal blur. | BlurFilter | ||
blurY : Number
The amount of vertical blur. | BlurFilter | ||
constructor : Object
類別物件的參照或是特定物件實體的建構函數。 | Object | ||
quality : int
The number of times to apply the filter. | BlurFilter |
方法 | 定義自 | ||
---|---|---|---|
Constructor. | BlurFilter | ||
addEventListener(type:String, listener:Function, useCapture:Boolean = false, priority:int = 0, useWeakReference:Boolean = false):void
會在 EventDispatcher 物件註冊事件偵聽程式,以便讓偵聽程式收到事件的通知。 | EventDispatcher | ||
Returns a copy of this filter object. | BlurFilter | ||
會將事件傳送到事件流程。 | EventDispatcher | ||
會檢查 EventDispatcher 物件是否有對特定的事件類型註冊偵聽程式。 | EventDispatcher | ||
指出物件是否有已定義的指定屬性。 | Object | ||
指出 Object 類別的實體是否位於指定為參數的物件原型鏈中。 | Object | ||
Propagates a change event when the filter has changed. | BaseFilter | ||
指出指定的屬性是否存在,以及是否可列舉。 | Object | ||
會從 EventDispatcher 物件移除偵聽程式。 | EventDispatcher | ||
為迴圈作業設定動態屬性的可用性。 | Object | ||
傳回代表此物件的字串,根據地區特定慣例進行格式化。 | Object | ||
會傳回指定之物件的字串形式。 | Object | ||
會傳回指定之物件的基本值。 | Object | ||
檢查此 EventDispatcher 物件是否已註冊事件偵聽程式,或者此物件的任何祖系已為特定事件類型註冊事件偵聽程式。 | EventDispatcher |
blurX | 屬性 |
blurX:Number
語言版本: | ActionScript 3.0 |
產品版本: | Flex 4 |
執行階段版本: | Flash Player 10, AIR 1.5 |
The amount of horizontal blur. Valid values are 0 to 255. A blur of 1 or less means that the original image is copied as is. The default value is 4. Values that are a power of 2 (such as 2, 4, 8, 16, and 32) are optimized to render more quickly than other values.
預設值為 4.0。
實作
public function get blurX():Number
public function set blurX(value:Number):void
blurY | 屬性 |
blurY:Number
語言版本: | ActionScript 3.0 |
產品版本: | Flex 4 |
執行階段版本: | Flash Player 10, AIR 1.5 |
The amount of vertical blur. Valid values are 0 to 255. A blur of 1 or less means that the original image is copied as is. The default value is 4. Values that are a power of 2 (such as 2, 4, 8, 16, and 32) are optimized to render more quickly than other values.
預設值為 4.0。
實作
public function get blurY():Number
public function set blurY(value:Number):void
quality | 屬性 |
quality:int
語言版本: | ActionScript 3.0 |
產品版本: | Flex 4 |
執行階段版本: | Flash Player 10, AIR 1.5 |
The number of times to apply the filter. The default value is
BitmapFilterQuality.LOW
, which is equivalent to applying the filter
once. The value BitmapFilterQuality.MEDIUM
applies the filter twice;
the value BitmapFilterQuality.HIGH
applies it three times. Filters
with lower values are rendered more quickly.
For most applications, a quality value of low, medium, or high is
sufficient. Although you can use additional numeric values up to 15
to achieve different effects, higher values are rendered more slowly.
Instead of increasing the value of quality, you can often get a similar
effect, and with faster rendering, by simply increasing the values of
the blurX
and blurY
properties.
預設值為 "low"。
實作
public function get quality():int
public function set quality(value:int):void
BlurFilter | () | 建構函式 |
public function BlurFilter(blurX:Number = 4.0, blurY:Number = 4.0, quality:int = 1)
語言版本: | ActionScript 3.0 |
產品版本: | Flex 4 |
執行階段版本: | Flash Player 10, AIR 1.5 |
Constructor. The default values create a soft, unfocused image.
參數blurX:Number (default = 4.0 ) — The amount to blur horizontally. Valid values are from 0 to 255.0 (floating-point
value).
| |
blurY:Number (default = 4.0 ) — The amount to blur vertically. Valid values are from 0 to 255.0 (floating-point
value).
| |
quality:int (default = 1 ) — The number of times to apply the filter. You can specify the quality using
the flash.filters.BitmapFilterQuality constants:
High quality approximates a Gaussian blur. For most applications, these three values are sufficient. Although you can use additional numeric values up to 15 to achieve different effects, be aware that higher values are rendered more slowly. |
clone | () | 方法 |
public function clone():BitmapFilter
語言版本: | ActionScript 3.0 |
產品版本: | Flex 4 |
執行階段版本: | Flash Player 10, AIR 1.5 |
Returns a copy of this filter object.
傳回值BitmapFilter — A new BlurFilter instance with all the same
properties as the original BlurFilter instance.
|
<?xml version="1.0"?> <!-- filters/examples/BlurFilterExample.mxml --> <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:mx="library://ns.adobe.com/flex/mx" xmlns:s="library://ns.adobe.com/flex/spark" creationComplete="createFilters()"> <fx:Script><![CDATA[ import spark.filters.*; import flash.filters.BitmapFilterQuality; import flash.filters.BitmapFilterType; private var myBlurFilter:BlurFilter; private var color:Number = 0xFF33FF; public function createFilters():void { myBlurFilter = new BlurFilter(3, 3, BitmapFilterQuality.MEDIUM); b1.filters = [myBlurFilter]; } ]]></fx:Script> <s:VGroup> <!-- This button has a filter applied in ActionScript. --> <s:Button id="b1" label="Click me"/> <!-- This button has a filter applied in MXML. --> <s:Button id="b2" label="Click me"> <s:filters> <s:BlurFilter blurX="3" blurY="3" quality="{BitmapFilterQuality.MEDIUM}"/> </s:filters> </s:Button> </s:VGroup> </s:Application>
Tue Jun 12 2018, 03:47 PM Z