Paket | mx.graphics |
Klass | public class RadialGradientStroke |
Arv | RadialGradientStroke GradientStroke GradientBase EventDispatcher Object |
Språkversion: | ActionScript 3.0 |
Produktversion: | Flex 3 |
Körningsmiljöversioner: | Flash Player 9, AIR 1.1 |
MXML-standardegenskapentries
Fler exempel
Relaterade API-element
Egenskap | Definieras med | ||
---|---|---|---|
angle : Number Borttagen: Använd rotation
By default, the LinearGradientStroke defines a transition
from left to right across the control. | GradientBase | ||
caps : String
Specifies the appearance of the ends of lines. | GradientStroke | ||
constructor : Object
En referens till klassobjektet eller konstruktorfunktionen för en given objektinstans. | Object | ||
entries : Array
An Array of GradientEntry objects
defining the fill patterns for the gradient fill. | GradientBase | ||
focalPointRatio : Number
Sets the location of the start of the radial fill. | RadialGradientStroke | ||
interpolationMethod : String
A value from the InterpolationMethod class
that specifies which interpolation method to use. | GradientBase | ||
joints : String
A value from the JointStyle class that specifies the type
of joint appearance used at angles. | GradientStroke | ||
matrix : Matrix
An array of values used for matrix transformation. | GradientBase | ||
miterLimit : Number
A number that indicates the limit at which a miter is cut off. | GradientStroke | ||
pixelHinting : Boolean
A Boolean value that specifies whether to hint strokes to full pixels. | GradientStroke | ||
rotation : Number
By default, the LinearGradientStroke defines a transition
from left to right across the control. | GradientBase | ||
scaleMode : String
Specifies which scale mode to use. | GradientStroke | ||
scaleX : Number
The horizontal scale of the gradient transform, which defines the width of the (unrotated) gradient
| RadialGradientStroke | ||
scaleY : Number
The vertical scale of the gradient transform, which defines the height of the (unrotated) gradient
| RadialGradientStroke | ||
spreadMethod : String
A value from the SpreadMethod class
that specifies which spread method to use. | GradientBase | ||
weight : Number
The stroke weight, in pixels. | GradientStroke | ||
x : Number
The distance by which to translate each point along the x axis. | GradientBase | ||
y : Number
The distance by which to translate each point along the y axis. | GradientBase |
Metod | Definieras med | ||
---|---|---|---|
RadialGradientStroke(weight:Number = 1, pixelHinting:Boolean = false, scaleMode:String = "normal", caps:String = "round", joints:String = "round", miterLimit:Number = 3)
Constructor. | RadialGradientStroke | ||
addEventListener(type:String, listener:Function, useCapture:Boolean = false, priority:int = 0, useWeakReference:Boolean = false):void
Registrerar ett händelseavlyssnarobjekt för ett EventDispatcher-objekt så att avlyssnaren får meddelanden om händelser. | EventDispatcher | ||
Applies the properties to the specified Graphics object. | GradientStroke | ||
Generates a GraphicsStroke object representing
this stroke. | GradientStroke | ||
Skickar en händelse till händelseflödet. | EventDispatcher | ||
Kontrollerar om EventDispatcher-objektet har några avlyssnare registrerade för en viss typ av händelse. | EventDispatcher | ||
Anger om det finns en egenskap angiven för ett objekt. | Object | ||
Anger om en instans av klassen Object finns i prototypkedjan för objektet som anges som parameter. | Object | ||
Anger om den angivna egenskapen finns och är uppräkningsbar. | Object | ||
Tar bort en avlyssnare från EventDispatcher-objektet. | EventDispatcher | ||
Anger tillgänglighet för en dynamisk egenskap för slingåtgärder. | Object | ||
Returnerar det här objektets strängrepresentation, formaterad i enlighet med språkspecifika konventioner. | Object | ||
Returnerar det angivna objektets strängbeteckning. | Object | ||
Returnerar det angivna objektets primitiva värde. | Object | ||
Kontrollerar om en händelseavlyssnare är registrerad för det här EventDispatcher-objektet eller något av dess överordnade objekt för den angivna händelsetypen. | EventDispatcher |
focalPointRatio | egenskap |
focalPointRatio:Number
Språkversion: | ActionScript 3.0 |
Produktversion: | Flex 3 |
Körningsmiljöversioner: | Flash Player 9, AIR 1.1 |
Sets the location of the start of the radial fill.
Valid values are from -1.0
to 1.0
.
A value of -1.0
sets the focal point
(or, start of the gradient fill)
on the left of the bounding Rectangle.
A value of 1.0
sets the focal point
on the right of the bounding Rectangle.
If you use this property in conjunction
with the angle
property,
this value specifies the degree of distance
from the center that the focal point occurs.
For example, with an angle of 45
and focalPointRatio
of 0.25,
the focal point is slightly lower and to the right of center.
If you set focalPointRatio
to 0
,
the focal point is in the middle of the bounding Rectangle.
focalPointRatio
to 1
,
the focal point is all the way to the bottom right corner
of the bounding Rectangle.
Standardvärdet är 0.0.
Den här egenskapen kan användas som källan för databindning. När den här egenskapen ändras, skickas händelsen propertyChange
.
Implementering
public function get focalPointRatio():Number
public function set focalPointRatio(value:Number):void
scaleX | egenskap |
scaleX:Number
Språkversion: | ActionScript 3.0 |
Produktversion: | Flex 3 |
Körningsmiljöversioner: | Flash Player 9, AIR 1.1 |
The horizontal scale of the gradient transform, which defines the width of the (unrotated) gradient
Den här egenskapen kan användas som källan för databindning. När den här egenskapen ändras, skickas händelsen propertyChange
.
Implementering
public function get scaleX():Number
public function set scaleX(value:Number):void
scaleY | egenskap |
scaleY:Number
Språkversion: | ActionScript 3.0 |
Produktversion: | Flex 3 |
Körningsmiljöversioner: | Flash Player 9, AIR 1.1 |
The vertical scale of the gradient transform, which defines the height of the (unrotated) gradient
Den här egenskapen kan användas som källan för databindning. När den här egenskapen ändras, skickas händelsen propertyChange
.
Implementering
public function get scaleY():Number
public function set scaleY(value:Number):void
RadialGradientStroke | () | Konstruktor |
public function RadialGradientStroke(weight:Number = 1, pixelHinting:Boolean = false, scaleMode:String = "normal", caps:String = "round", joints:String = "round", miterLimit:Number = 3)
Språkversion: | ActionScript 3.0 |
Produktversion: | Flex 3 |
Körningsmiljöversioner: | Flash Player 9, AIR 1.1 |
Constructor.
Parametrarweight:Number (default = 1 ) — Specifies the line weight, in pixels.
This parameter is optional,
with a default value of 1 .
| |
pixelHinting:Boolean (default = false ) — A Boolean value that specifies
whether to hint strokes to full pixels.
This affects both the position of anchors of a curve
and the line stroke size itself.
With pixelHinting set to true ,
Flash Player and AIR hint line widths to full pixel widths.
With pixelHinting set to false ,
disjoints can appear for curves and straight lines.
This parameter is optional,
with a default value of false .
| |
scaleMode:String (default = "normal ") — A value from the LineScaleMode class
that specifies which scale mode to use.
Valid values are LineScaleMode.HORIZONTAL ,
LineScaleMode.NONE , LineScaleMode.NORMAL ,
and LineScaleMode.VERTICAL .
This parameter is optional,
with a default value of LineScaleMode.NORMAL .
| |
caps:String (default = "round ") — A value from the CapsStyle class
that specifies the type of caps at the end of lines.
Valid values are CapsStyle.NONE ,
CapsStyle.ROUND , and CapsStyle.SQUARE .
A null value is equivalent to
CapsStyle.ROUND .
This parameter is optional,
with a default value of CapsStyle.ROUND .
| |
joints:String (default = "round ") — A value from the JointStyle class
that specifies the type of joint appearance used at angles.
Valid values are JointStyle.BEVEL ,
JointStyle.MITER , and JointStyle.ROUND .
A null value is equivalent to
JointStyle.ROUND .
This parameter is optional,
with a default value of JointStyle.ROUND .
| |
miterLimit:Number (default = 3 ) — A number that indicates the limit
at which a miter is cut off.
Valid values range from 1 to 255
(and values outside of that range are rounded to 1 or 255).
This value is only used if the jointStyle property
is set to miter .
The miterLimit value represents the length that a miter
can extend beyond the point at which the lines meet to form a joint.
The value expresses a factor of the line thickness .
For example, with a miterLimit factor of 2.5 and a
thickness of 10 pixels, the miter is cut off at 25 pixels.
This parameter is optional,
with a default value of 3 .
|
Tue Jun 12 2018, 01:40 PM Z