ModuleAssignment

Pakket	com.adobe.icc.vo
Klasse	public class ModuleAssignment
Overerving	ModuleAssignment Object
Implementatie	IEventDispatcher

Taalversie:

ActionScript 3.0

Productversie:

Asset Composer Building Block 10

Runtimeversies:

AIR (unsupported), Flash Player 10.2

Value Object representation for a Data Module assignment to a Target Area. TargetAreas may contain a list of ModuleAssignments that determines the data modules assigned to the Target Area. Each assignment in the List would have its own properties determining whether the associated DataModule is preSelected, editable or optional.

Verwante API-elementen

com.adobe.icc.vo.TargetAreaAssignment

Openbare eigenschappen

Overerfde openbare eigenschappen verbergen

Overerfde openbare eigenschappen weergeven

	Eigenschap		Gedefinieerd door
		constructor : Object Verwijzing naar het klasseobject of de constructorfunctie van een bepaalde objectinstantie.	Object
		dataModule : DataModule The module assigned to the target.	ModuleAssignment
		editable : Boolean True if the module's value can be edited at runtime.	ModuleAssignment
		expression : String Runtime in-line inclusion expression for the module.	ModuleAssignment
		id : String GUID.	ModuleAssignment
		indentationLevel : Number Specifies the indentation level for the target data module.	ModuleAssignment
		optional : Boolean True if the module is not required to be selected in the target.	ModuleAssignment
		position : int Zero-based position of the module within the target to which it is assigned.	ModuleAssignment
		preSelected : Boolean True if the module is pre-selected in the target at runtime.	ModuleAssignment

Openbare methoden

Overerfde openbare methoden verbergen

Overerfde openbare methoden weergeven

	Methode		Gedefinieerd door
		ModuleAssignment() Constructor	ModuleAssignment
		addEventListener(type:String, listener:Function, useCapture:Boolean = false, priority:int = 0, weakRef:Boolean = false):void Registers an event listener object with an EventDispatcher object so that the listener receives notification of an event.	ModuleAssignment
		dispatchEvent(event:Event):Boolean Dispatches an event into the event flow.	ModuleAssignment
		hasEventListener(type:String):Boolean Checks whether the EventDispatcher object has any listeners registered for a specific type of event.	ModuleAssignment
		hasOwnProperty(name:String):Boolean Geeft aan of voor een object een opgegeven eigenschap is gedefinieerd.	Object
		isPrototypeOf(theClass:Object):Boolean Geeft aan of een instantie van de klasse Object zich in de prototypeketen van het object bevindt dat als parameter is opgegeven.	Object
		propertyIsEnumerable(name:String):Boolean Geeft aan of de opgegeven eigenschap bestaat en kan worden opgesomd.	Object
		removeEventListener(type:String, listener:Function, useCapture:Boolean = false):void Removes a listener from the EventDispatcher object.	ModuleAssignment
		setPropertyIsEnumerable(name:String, isEnum:Boolean = true):void Stelt de beschikbaarheid van een dynamische eigenschap voor lusbewerkingen in.	Object
		toLocaleString():String Geeft de tekenreeksweergave van dit object weer, geformatteerd volgens de locatiespecifieke conventies.	Object
		toString():String Fetch String representation of this object.	ModuleAssignment
		valueOf():Object Retourneert de primitieve waarde van het opgegeven object.	Object
		willTrigger(type:String):Boolean Checks whether an event listener is registered with this EventDispatcher object or any of its ancestors for the specified event type.	ModuleAssignment

Eigenschapdetails

dataModule

eigenschap

dataModule:DataModule

Taalversie:

ActionScript 3.0

Productversie:

Asset Composer Building Block 9.5

Runtimeversies:

AIR (unsupported), Flash Player 9, Flash Player 10

The module assigned to the target.

Deze eigenschap kan als de bron voor gegevensbinding worden gebruikt. Wanneer deze eigenschap wordt gewijzigd, wordt de gebeurtenis propertyChange verzonden.

Implementatie
public function get dataModule():DataModule
public function set dataModule(value:DataModule):void

editable

eigenschap

editable:Boolean

Taalversie:

ActionScript 3.0

Productversie:

Asset Composer Building Block 9.5

Runtimeversies:

AIR (unsupported), Flash Player 9, Flash Player 10

True if the module's value can be edited at runtime.

Deze eigenschap kan als de bron voor gegevensbinding worden gebruikt. Wanneer deze eigenschap wordt gewijzigd, wordt de gebeurtenis propertyChange verzonden.

Implementatie
public function get editable():Boolean
public function set editable(value:Boolean):void

expression

eigenschap

expression:String

Taalversie:

ActionScript 3.0

Productversie:

Asset Composer Building Block 9.5

Runtimeversies:

AIR (unsupported), Flash Player 9, Flash Player 10

Runtime in-line inclusion expression for the module. If this expression evaluates to true, the inclusion of the module in the target falls to its preSelected and/or optional property settings. If the expression evaluates to false, the module is not included in the target under any circumstances.

Deze eigenschap kan als de bron voor gegevensbinding worden gebruikt. Wanneer deze eigenschap wordt gewijzigd, wordt de gebeurtenis propertyChange verzonden.

Implementatie
public function get expression():String
public function set expression(value:String):void

id

eigenschap

id:String

Taalversie:

ActionScript 3.0

Productversie:

Asset Composer Building Block 9.5

Runtimeversies:

AIR (unsupported), Flash Player 9, Flash Player 10

GUID. Do not set on client.

Deze eigenschap kan als de bron voor gegevensbinding worden gebruikt. Wanneer deze eigenschap wordt gewijzigd, wordt de gebeurtenis propertyChange verzonden.

Implementatie
public function get id():String
public function set id(value:String):void

indentationLevel

eigenschap

indentationLevel:Number

Taalversie:

ActionScript 3.0

Productversie:

Asset Composer Building Block 9.5

Runtimeversies:

AIR (unsupported), Flash Player 9, Flash Player 10

Specifies the indentation level for the target data module.

Deze eigenschap kan als de bron voor gegevensbinding worden gebruikt. Wanneer deze eigenschap wordt gewijzigd, wordt de gebeurtenis propertyChange verzonden.

Implementatie
public function get indentationLevel():Number
public function set indentationLevel(value:Number):void

optional

eigenschap

optional:Boolean

Taalversie:

ActionScript 3.0

Productversie:

Asset Composer Building Block 9.5

Runtimeversies:

AIR (unsupported), Flash Player 9, Flash Player 10

True if the module is not required to be selected in the target.

Deze eigenschap kan als de bron voor gegevensbinding worden gebruikt. Wanneer deze eigenschap wordt gewijzigd, wordt de gebeurtenis propertyChange verzonden.

Implementatie
public function get optional():Boolean
public function set optional(value:Boolean):void

position

eigenschap

position:int

Taalversie:

ActionScript 3.0

Productversie:

Asset Composer Building Block 9.5

Runtimeversies:

AIR (unsupported), Flash Player 9, Flash Player 10

Zero-based position of the module within the target to which it is assigned.

Deze eigenschap kan als de bron voor gegevensbinding worden gebruikt. Wanneer deze eigenschap wordt gewijzigd, wordt de gebeurtenis propertyChange verzonden.

Implementatie
public function get position():int
public function set position(value:int):void

preSelected

eigenschap

preSelected:Boolean

Taalversie:

ActionScript 3.0

Productversie:

Asset Composer Building Block 9.5

Runtimeversies:

AIR (unsupported), Flash Player 9, Flash Player 10

True if the module is pre-selected in the target at runtime.

Deze eigenschap kan als de bron voor gegevensbinding worden gebruikt. Wanneer deze eigenschap wordt gewijzigd, wordt de gebeurtenis propertyChange verzonden.

Implementatie
public function get preSelected():Boolean
public function set preSelected(value:Boolean):void

Constructordetails

()

Constructor

public function ModuleAssignment()

Taalversie:

ActionScript 3.0

Productversie:

Asset Composer Building Block 9.5

Runtimeversies:

AIR (unsupported), Flash Player 9, Flash Player 10

Constructor

Methodedetails

addEventListener

()

methode

 public function addEventListener(type:String, listener:Function, useCapture:Boolean = false, priority:int = 0, weakRef:Boolean = false):void

Registers an event listener object with an EventDispatcher object so that the listener receives notification of an event. You can register event listeners on all nodes in the display list for a specific type of event, phase, and priority.

After you successfully register an event listener, you cannot change its priority through additional calls to addEventListener(). To change a listener's priority, you must first call removeEventListener(). Then you can register the listener again with the new priority level.

After the listener is registered, subsequent calls to addEventListener() with a different value for either type or useCapture result in the creation of a separate listener registration. For example, if you first register a listener with useCapture set to true, it listens only during the capture phase. If you call addEventListener() again using the same listener object, but with useCapture set to false, you have two separate listeners: one that listens during the capture phase, and another that listens during the target and bubbling phases.

You cannot register an event listener for only the target phase or the bubbling phase. Those phases are coupled during registration because bubbling applies only to the ancestors of the target node.

When you no longer need an event listener, remove it by calling EventDispatcher.removeEventListener(); otherwise, memory problems might result. Objects with registered event listeners are not automatically removed from memory because the garbage collector does not remove objects that still have references.

Copying an EventDispatcher instance does not copy the event listeners attached to it. (If your newly created node needs an event listener, you must attach the listener after creating the node.) However, if you move an EventDispatcher instance, the event listeners attached to it move along with it.

If the event listener is being registered on a node while an event is also being processed on this node, the event listener is not triggered during the current phase but may be triggered during a later phase in the event flow, such as the bubbling phase.

If an event listener is removed from a node while an event is being processed on the node, it is still triggered by the current actions. After it is removed, the event listener is never invoked again (unless it is registered again for future processing).

Parameters

	`type:String` — The type of event.

	`listener:Function` — The listener function that processes the event. This function must accept an event object as its only parameter and must return nothing, as this example shows: `function(evt:Event):void` The function can have any name.

	`useCapture:Boolean` (default = `false`) — Determines whether the listener works in the capture phase or the target and bubbling phases. If `useCapture` is set to `true`, the listener processes the event only during the capture phase and not in the target or bubbling phase. If `useCapture` is `false`, the listener processes the event only during the target or bubbling phase. To listen for the event in all three phases, call `addEventListener()` twice, once with `useCapture` set to `true`, then again with `useCapture` set to `false`.

	`priority:int` (default = `0`) — The priority level of the event listener. Priorities are designated by a 32-bit integer. The higher the number, the higher the priority. All listeners with priority n are processed before listeners of priority n-1. If two or more listeners share the same priority, they are processed in the order in which they were added. The default priority is 0.

	`weakRef:Boolean` (default = `false`) — Determines whether the reference to the listener is strong or weak. A strong reference (the default) prevents your listener from being garbage-collected. A weak reference does not. Class-level member functions are not subject to garbage collection, so you can set `useWeakReference` to `true` for class-level member functions without subjecting them to garbage collection. If you set `useWeakReference` to `true` for a listener that is a nested inner function, the function will be garbge-collected and no longer persistent. If you create references to the inner function (save it in another variable) then it is not garbage-collected and stays persistent.

dispatchEvent

()

methode

public function dispatchEvent(event:Event):Boolean

Dispatches an event into the event flow. The event target is the EventDispatcher object upon which dispatchEvent() is called.

Parameters

event:Event — The event object dispatched into the event flow.

Geretourneerde waarde

Boolean — A value of true unless preventDefault() is called on the event, in which case it returns false.

hasEventListener

()

methode

public function hasEventListener(type:String):Boolean

Checks whether the EventDispatcher object has any listeners registered for a specific type of event. This allows you to determine where an EventDispatcher object has altered handling of an event type in the event flow hierarchy. To determine whether a specific event type will actually trigger an event listener, use IEventDispatcher.willTrigger().

The difference between hasEventListener() and willTrigger() is that hasEventListener() examines only the object to which it belongs, whereas willTrigger() examines the entire event flow for the event specified by the type parameter.

Parameters

type:String — The type of event.

Geretourneerde waarde

Boolean — A value of true if a listener of the specified type is registered; false otherwise.

removeEventListener

()

methode

public function removeEventListener(type:String, listener:Function, useCapture:Boolean = false):void

Removes a listener from the EventDispatcher object. If there is no matching listener registered with the EventDispatcher object, a call to this method has no effect.

Parameters

	`type:String` — The type of event.

	`listener:Function` — The listener object to remove.

	`useCapture:Boolean` (default = `false`) — Specifies whether the listener was registered for the capture phase or the target and bubbling phases. If the listener was registered for both the capture phase and the target and bubbling phases, two calls to `removeEventListener()` are required to remove both: one call with `useCapture` set to `true`, and another call with `useCapture` set to `false`.

toString

()

methode

public function toString():String

Taalversie:

ActionScript 3.0

Productversie:

Asset Composer Building Block 9.5

Runtimeversies:

AIR (unsupported), Flash Player 9, Flash Player 10

Fetch String representation of this object.

Geretourneerde waarde

String — String representation of this object.

willTrigger

()

methode

public function willTrigger(type:String):Boolean

Checks whether an event listener is registered with this EventDispatcher object or any of its ancestors for the specified event type. This method returns true if an event listener is triggered during any phase of the event flow when an event of the specified type is dispatched to this EventDispatcher object or any of its descendants.

Parameters

type:String — The type of event.

Geretourneerde waarde

Boolean — A value of true if a listener of the specified type will be triggered; false otherwise.

Juridische kennisgeving | Online privacybeleid

ModuleAssignment - AS3 Asset Composer

Klassen x

dataModule

editable

expression

id

indentationLevel

optional

position

preSelected