| 패키지 | com.adobe.solutions.prm.vo |
| 클래스 | public class AssetVO |
| 상속 | AssetVO  Object |
| 구현 | IEventDispatcher |
| 언어 버전: | ActionScript 3.0 |
| 제품 버전: | Project Management Building Block 10.0 |
| 런타임 버전: | Flash Player 10.2, AIR (unsupported) |
상속되는 공용 속성 숨기기
상속되는 공용 속성 표시| 속성 | 정의 주체 | ||
|---|---|---|---|
 | constructor : Object
지정된 객체 인스턴스의 클래스 객체 또는 생성자 함수에 대한 참조입니다. | Object | |
| file : File
Defines the content file for an asset. | AssetVO | ||
| id : String
Defines the unique identifier for an asset. | AssetVO | ||
| publishingContext : String
Do not use. | AssetVO | ||
| publishingPath : String
Do not use. | AssetVO | ||
| thumbnailLarge : File
Defines the large-sized thumbnail for asset content. | AssetVO | ||
| thumbnailSmall : File
Defines the small-sized thumbnail for asset content. | AssetVO | ||
| type : String
Defines the type of an asset. | AssetVO | ||
| version : String
Defines the version of an asset. | AssetVO | ||
| 메서드 | 정의 주체 | ||
|---|---|---|---|
AssetVO()
The constructor for AssetVO class. | AssetVO | ||
addEventListener(type:String, listener:Function, useCapture:Boolean = false, priority:int = 0, weakRef:Boolean = false):void
Registers an event listener object with an EventDispatcher object so that the listener
receives notification of an event. | AssetVO | ||
Dispatches an event into the event flow. | AssetVO | ||
Checks whether the EventDispatcher object has any listeners registered for a specific type
of event. | AssetVO | ||
|
지정된 속성이 객체에 정의되어 있는지 여부를 나타냅니다. | Object | |
|
Object 클래스의 인스턴스가 매개 변수로 지정된 객체의 프로토타입 체인에 있는지 여부를 나타냅니다. | Object | |
|
지정된 속성이 존재하고 열거 가능한지 여부를 나타냅니다. | Object | |
Removes a listener from the EventDispatcher object. | AssetVO | ||
|
루프 작업에서 동적 속성을 사용할 수 있는지 여부를 설정합니다. | Object | |
|
로캘별 규칙에 따라 서식이 지정된 이 객체의 문자열 표현을 반환합니다. | Object | |
|
지정된 객체의 문자열 표현을 반환합니다. | Object | |
|
지정된 객체의 프리미티브 값을 반환합니다. | Object | |
Checks whether an event listener is registered with this EventDispatcher object or any of its ancestors for the specified event type. | AssetVO | ||
file | 속성 |
id | 속성 |
publishingContext | 속성 |
publishingPath | 속성 |
thumbnailLarge | 속성 |
thumbnailLarge:File| 언어 버전: | ActionScript 3.0 |
| 제품 버전: | Project Management Building Block 10.0 |
| 런타임 버전: | Flash Player 10.2, AIR (unsupported) |
Defines the large-sized thumbnail for asset content. Please note that the thumbnails are generated asynchronously, so a thumbnail may not be instantly available.
구현
public function get thumbnailLarge():File public function set thumbnailLarge(value:File):voidthumbnailSmall | 속성 |
thumbnailSmall:File| 언어 버전: | ActionScript 3.0 |
| 제품 버전: | Project Management Building Block 10.0 |
| 런타임 버전: | Flash Player 10.2, AIR (unsupported) |
Defines the small-sized thumbnail for asset content. Please note that te thumbnails are generated asynchronously, so a thumbnail may not be instantly available.
구현
public function get thumbnailSmall():File public function set thumbnailSmall(value:File):voidtype | 속성 |
type:String| 언어 버전: | ActionScript 3.0 |
| 제품 버전: | Project Management Building Block 10.0 |
| 런타임 버전: | Flash Player 10.2, AIR (unsupported) |
Defines the type of an asset. It can be any value, as desired by the user. No value is specified in the default implementation. A user-defined, custom value can be used to differentiate between different types of assets.
구현
public function get type():String public function set type(value:String):voidversion | 속성 |
version:String| 언어 버전: | ActionScript 3.0 |
| 제품 버전: | Project Management Building Block 10.0 |
| 런타임 버전: | Flash Player 10.2, AIR (unsupported) |
Defines the version of an asset. It can be any string value, as desired by the user. The default implementation uses major version to represent an increment in the version, minor version is always. For example, 1.0, 2.0, and so on.
구현
public function get version():String public function set version(value:String):voidAssetVO | () | 생성자 |
public function AssetVO()| 언어 버전: | ActionScript 3.0 |
| 제품 버전: | Project Management Building Block 10.0 |
| 런타임 버전: | Flash Player 10.2, AIR (unsupported) |
The constructor for AssetVO class.
addEventListener | () | 메서드 |
public function addEventListener(type:String, listener:Function, useCapture:Boolean = false, priority:int = 0, weakRef:Boolean = false):voidRegisters an event listener object with an EventDispatcher object so that the listener receives notification of an event. You can register event listeners on all nodes in the display list for a specific type of event, phase, and priority.
After you successfully register an event listener, you cannot change its priority
through additional calls to addEventListener(). To change a listener's priority, you
must first call removeEventListener(). Then you can register the listener again with the new
priority level.
After the listener is registered, subsequent calls to
addEventListener() with a different value for either type or useCapture result in the
creation of a separate listener registration. For example, if you first register a
listener with useCapture set to true, it listens only during the capture phase. If you
call addEventListener() again using the same listener object, but with useCapture set to
false, you have two separate listeners: one that listens during the capture phase, and
another that listens during the target and bubbling phases.
You cannot register an event listener for only the target phase or the bubbling phase. Those phases are coupled during registration because bubbling applies only to the ancestors of the target node.
When you no longer need an event listener, remove it by calling EventDispatcher.removeEventListener(); otherwise, memory problems might result. Objects
with registered event listeners are not automatically removed from memory because the
garbage collector does not remove objects that still have references.
Copying an EventDispatcher instance does not copy the event listeners attached to it. (If your newly created node needs an event listener, you must attach the listener after creating the node.) However, if you move an EventDispatcher instance, the event listeners attached to it move along with it.
If the event listener is being registered on a node while an event is also being processed on this node, the event listener is not triggered during the current phase but may be triggered during a later phase in the event flow, such as the bubbling phase.
If an event listener is removed from a node while an event is being processed on the node, it is still triggered by the current actions. After it is removed, the event listener is never invoked again (unless it is registered again for future processing).
매개 변수
type:String — The type of event.
| |
listener:Function — The listener function that processes the event. This function must accept an event object
as its only parameter and must return nothing, as this example shows:
| |
useCapture:Boolean (default = false)useCapture is set to true, the
listener processes the event only during the capture phase and not in the target or
bubbling phase. If useCapture is false, the listener processes the event only
during the target or bubbling phase. To listen for the event in all three phases, call
addEventListener() twice, once with useCapture set to true,
then again with useCapture set to false.
| |
priority:int (default = 0) | |
weakRef:Boolean (default = false)Class-level member functions are not subject to garbage
collection, so you can set |
dispatchEvent | () | 메서드 |
public function dispatchEvent(event:Event):Boolean
Dispatches an event into the event flow. The event target is the
EventDispatcher object upon which dispatchEvent() is called.
매개 변수
event:Event — The event object dispatched into the event flow.
|
Boolean — A value of true unless preventDefault() is called on the event,
in which case it returns false.
|
hasEventListener | () | 메서드 |
public function hasEventListener(type:String):Boolean
Checks whether the EventDispatcher object has any listeners registered for a specific type
of event. This allows you to determine where an EventDispatcher object has altered handling of an event type in the event flow hierarchy. To determine whether
a specific event type will actually trigger an event listener, use IEventDispatcher.willTrigger().
The difference between hasEventListener() and willTrigger() is that hasEventListener() examines only the object to which it belongs, whereas willTrigger() examines the entire event flow for the event specified by the type parameter.
매개 변수
type:String — The type of event.
|
Boolean — A value of true if a listener of the specified type is registered; false otherwise.
|
removeEventListener | () | 메서드 |
public function removeEventListener(type:String, listener:Function, useCapture:Boolean = false):voidRemoves a listener from the EventDispatcher object. If there is no matching listener registered with the EventDispatcher object, a call to this method has no effect.
매개 변수
type:String — The type of event.
| |
listener:Function — The listener object to remove.
| |
useCapture:Boolean (default = false)removeEventListener() are required to remove both: one call with useCapture set to true, and another call with useCapture set to false.
|
willTrigger | () | 메서드 |
public function willTrigger(type:String):Boolean
Checks whether an event listener is registered with this EventDispatcher object or any of its ancestors for the specified event type. This method returns true if an event listener is triggered during any phase of the event flow when an event of the specified type is dispatched to this EventDispatcher object or any of its descendants.
The difference between hasEventListener() and willTrigger() is that hasEventListener() examines only the object to which it belongs, whereas willTrigger() examines the entire event flow for the event specified by the type parameter.
매개 변수
type:String — The type of event.
|
Boolean — A value of true if a listener of the specified type will be triggered; false otherwise.
|
Tue Jun 12 2018, 03:17 PM Z