CustomAttribute

패키지	com.adobe.livecycle.rca.model
클래스	public class CustomAttribute
상속	CustomAttribute Object
구현	IEventDispatcher

버전부터 사용되지 않음 Review, Commenting, and Approval 10: 사용 com.adobe.solutions.rca.vo.CustomAttributeVO

언어 버전:

ActionScript 3.0

제품 버전:

Review, Commenting, and Approval Building Block 9.5

런타임 버전:

Flash Player 9, Flash Player 10, AIR (unsupported)

Represents a custom attribute associated with a review. This object holds the key-value pair.

공용 속성

상속되는 공용 속성 숨기기

상속되는 공용 속성 표시

	속성		정의 주체
		attrKey : String Specifies the key of the custom attribute.	CustomAttribute
		attrValue : String Specifies the value that corresponds to the key.	CustomAttribute
		constructor : Object 지정된 객체 인스턴스의 클래스 객체 또는 생성자 함수에 대한 참조입니다.	Object

공용 메서드

상속되는 공용 메서드 숨기기

상속되는 공용 메서드 표시

	메서드		정의 주체
		CustomAttribute() Constructor.	CustomAttribute
		addEventListener(type:String, listener:Function, useCapture:Boolean = false, priority:int = 0, weakRef:Boolean = false):void Registers an event listener object with an EventDispatcher object so that the listener receives notification of an event.	CustomAttribute
		dispatchEvent(event:Event):Boolean Dispatches an event into the event flow.	CustomAttribute
		hasEventListener(type:String):Boolean Checks whether the EventDispatcher object has any listeners registered for a specific type of event.	CustomAttribute
		hasOwnProperty(name:String):Boolean 지정된 속성이 객체에 정의되어 있는지 여부를 나타냅니다.	Object
		isPrototypeOf(theClass:Object):Boolean Object 클래스의 인스턴스가 매개 변수로 지정된 객체의 프로토타입 체인에 있는지 여부를 나타냅니다.	Object
		propertyIsEnumerable(name:String):Boolean 지정된 속성이 존재하고 열거 가능한지 여부를 나타냅니다.	Object
		removeEventListener(type:String, listener:Function, useCapture:Boolean = false):void Removes a listener from the EventDispatcher object.	CustomAttribute
		setPropertyIsEnumerable(name:String, isEnum:Boolean = true):void 루프 작업에서 동적 속성을 사용할 수 있는지 여부를 설정합니다.	Object
		toLocaleString():String 로캘별 규칙에 따라 서식이 지정된 이 객체의 문자열 표현을 반환합니다.	Object
		toString():String 지정된 객체의 문자열 표현을 반환합니다.	Object
		valueOf():Object 지정된 객체의 프리미티브 값을 반환합니다.	Object
		willTrigger(type:String):Boolean Checks whether an event listener is registered with this EventDispatcher object or any of its ancestors for the specified event type.	CustomAttribute

속성 세부 정보

attrKey

속성

attrKey:String

언어 버전:

ActionScript 3.0

제품 버전:

Review, Commenting, and Approval Building Block 9.5

런타임 버전:

Flash Player 9, Flash Player 10, AIR (unsupported)

Specifies the key of the custom attribute.

구현
public function get attrKey():String
public function set attrKey(value:String):void

attrValue

속성

attrValue:String

언어 버전:

ActionScript 3.0

제품 버전:

Review, Commenting, and Approval Building Block 9.5

런타임 버전:

Flash Player 9, Flash Player 10, AIR (unsupported)

Specifies the value that corresponds to the key.

구현
public function get attrValue():String
public function set attrValue(value:String):void

생성자 세부 정보

()

생성자

public function CustomAttribute()

언어 버전:

ActionScript 3.0

제품 버전:

Review, Commenting, and Approval Building Block 9.5

런타임 버전:

Flash Player 9, Flash Player 10, AIR (unsupported)

Constructor.

메서드 세부 정보

addEventListener

()

메서드

 public function addEventListener(type:String, listener:Function, useCapture:Boolean = false, priority:int = 0, weakRef:Boolean = false):void

Registers an event listener object with an EventDispatcher object so that the listener receives notification of an event. You can register event listeners on all nodes in the display list for a specific type of event, phase, and priority.

After you successfully register an event listener, you cannot change its priority through additional calls to addEventListener(). To change a listener's priority, you must first call removeEventListener(). Then you can register the listener again with the new priority level.

After the listener is registered, subsequent calls to addEventListener() with a different value for either type or useCapture result in the creation of a separate listener registration. For example, if you first register a listener with useCapture set to true, it listens only during the capture phase. If you call addEventListener() again using the same listener object, but with useCapture set to false, you have two separate listeners: one that listens during the capture phase, and another that listens during the target and bubbling phases.

You cannot register an event listener for only the target phase or the bubbling phase. Those phases are coupled during registration because bubbling applies only to the ancestors of the target node.

When you no longer need an event listener, remove it by calling EventDispatcher.removeEventListener(); otherwise, memory problems might result. Objects with registered event listeners are not automatically removed from memory because the garbage collector does not remove objects that still have references.

Copying an EventDispatcher instance does not copy the event listeners attached to it. (If your newly created node needs an event listener, you must attach the listener after creating the node.) However, if you move an EventDispatcher instance, the event listeners attached to it move along with it.

If the event listener is being registered on a node while an event is also being processed on this node, the event listener is not triggered during the current phase but may be triggered during a later phase in the event flow, such as the bubbling phase.

If an event listener is removed from a node while an event is being processed on the node, it is still triggered by the current actions. After it is removed, the event listener is never invoked again (unless it is registered again for future processing).

매개 변수

	`type:String` — The type of event.

	`listener:Function` — The listener function that processes the event. This function must accept an event object as its only parameter and must return nothing, as this example shows: `function(evt:Event):void` The function can have any name.

	`useCapture:Boolean` (default = `false`) — Determines whether the listener works in the capture phase or the target and bubbling phases. If `useCapture` is set to `true`, the listener processes the event only during the capture phase and not in the target or bubbling phase. If `useCapture` is `false`, the listener processes the event only during the target or bubbling phase. To listen for the event in all three phases, call `addEventListener()` twice, once with `useCapture` set to `true`, then again with `useCapture` set to `false`.

	`priority:int` (default = `0`) — The priority level of the event listener. Priorities are designated by a 32-bit integer. The higher the number, the higher the priority. All listeners with priority n are processed before listeners of priority n-1. If two or more listeners share the same priority, they are processed in the order in which they were added. The default priority is 0.

	`weakRef:Boolean` (default = `false`) — Determines whether the reference to the listener is strong or weak. A strong reference (the default) prevents your listener from being garbage-collected. A weak reference does not. Class-level member functions are not subject to garbage collection, so you can set `useWeakReference` to `true` for class-level member functions without subjecting them to garbage collection. If you set `useWeakReference` to `true` for a listener that is a nested inner function, the function will be garbge-collected and no longer persistent. If you create references to the inner function (save it in another variable) then it is not garbage-collected and stays persistent.

dispatchEvent

()

메서드

public function dispatchEvent(event:Event):Boolean

Dispatches an event into the event flow. The event target is the EventDispatcher object upon which dispatchEvent() is called.

매개 변수

event:Event — The event object dispatched into the event flow.

반환값

Boolean — A value of true unless preventDefault() is called on the event, in which case it returns false.

hasEventListener

()

메서드

public function hasEventListener(type:String):Boolean

Checks whether the EventDispatcher object has any listeners registered for a specific type of event. This allows you to determine where an EventDispatcher object has altered handling of an event type in the event flow hierarchy. To determine whether a specific event type will actually trigger an event listener, use IEventDispatcher.willTrigger().

The difference between hasEventListener() and willTrigger() is that hasEventListener() examines only the object to which it belongs, whereas willTrigger() examines the entire event flow for the event specified by the type parameter.

매개 변수

type:String — The type of event.

반환값

Boolean — A value of true if a listener of the specified type is registered; false otherwise.

removeEventListener

()

메서드

public function removeEventListener(type:String, listener:Function, useCapture:Boolean = false):void

Removes a listener from the EventDispatcher object. If there is no matching listener registered with the EventDispatcher object, a call to this method has no effect.

매개 변수

	`type:String` — The type of event.

	`listener:Function` — The listener object to remove.

	`useCapture:Boolean` (default = `false`) — Specifies whether the listener was registered for the capture phase or the target and bubbling phases. If the listener was registered for both the capture phase and the target and bubbling phases, two calls to `removeEventListener()` are required to remove both: one call with `useCapture` set to `true`, and another call with `useCapture` set to `false`.

willTrigger

()

메서드

public function willTrigger(type:String):Boolean

Checks whether an event listener is registered with this EventDispatcher object or any of its ancestors for the specified event type. This method returns true if an event listener is triggered during any phase of the event flow when an event of the specified type is dispatched to this EventDispatcher object or any of its descendants.

매개 변수

type:String — The type of event.

반환값

Boolean — A value of true if a listener of the specified type will be triggered; false otherwise.

법적 고지 사항 | 온라인 개인 정보 보호 정책

CustomAttribute - AS3 Review, Commenting, and Approval

클래스 x

attrKey

attrValue