RemotingServiceInfo - Referencia de la API de Adobe ActionScript® 3 (AS3 Data Dictionary)

Paquete	com.adobe.dct.transfer
Clase	public class RemotingServiceInfo
Herencia	RemotingServiceInfo Object
Implementa	IEventDispatcher

Versión del lenguaje:

ActionScript 3.0

Versión de producto:

Bloque de construcción Data Dictionary 10

Versiones de motor de ejecución:

AIR (unsupported), Flash Player 10.2

Transfer object holding the Remoting service information required by Data Dictionary.

Propiedades públicas

Ocultar propiedades públicas heredadas

Mostrar propiedades públicas heredadas

	Propiedad		Definido por
		constructor : Object Una referencia a la clase de objeto o función constructora para una instancia de objeto determinada.	Object
		destination : String The destination of the Remoting Service.	RemotingServiceInfo
		endpoint : String The endpoint of the RemotingServiceInfo.	RemotingServiceInfo
		id : String The unique Id for the RemotingServiceInfo.	RemotingServiceInfo
		name : String The name of Remoting Service.	RemotingServiceInfo
		readOperation : OperationInfo The name of read operation of the Remoting Service.	RemotingServiceInfo

Métodos públicos

Ocultar métodos públicos heredados

Mostrar métodos públicos heredados

	Método		Definido por
		addEventListener(type:String, listener:Function, useCapture:Boolean = false, priority:int = 0, weakRef:Boolean = false):void Registers an event listener object with an EventDispatcher object so that the listener receives notification of an event.	RemotingServiceInfo
		dispatchEvent(event:Event):Boolean Dispatches an event into the event flow.	RemotingServiceInfo
		hasEventListener(type:String):Boolean Checks whether the EventDispatcher object has any listeners registered for a specific type of event.	RemotingServiceInfo
		hasOwnProperty(name:String):Boolean Indica si un objeto tiene definida una propiedad especificada.	Object
		isPrototypeOf(theClass:Object):Boolean Indica si hay una instancia de la clase Object en la cadena de prototipo del objeto especificado como parámetro.	Object
		propertyIsEnumerable(name:String):Boolean Indica si existe la propiedad especificada y si es enumerable.	Object
		removeEventListener(type:String, listener:Function, useCapture:Boolean = false):void Removes a listener from the EventDispatcher object.	RemotingServiceInfo
		setPropertyIsEnumerable(name:String, isEnum:Boolean = true):void Establece la disponibilidad de una propiedad dinámica para operaciones de bucle.	Object
		toLocaleString():String Devuelve la representación de cadena de este objeto, con formato según las convenciones específicas de configuración regional.	Object
		toString():String Devuelve la representación de cadena del objeto especificado.	Object
		valueOf():Object Devuelve el valor simple del objeto especificado.	Object
		willTrigger(type:String):Boolean Checks whether an event listener is registered with this EventDispatcher object or any of its ancestors for the specified event type.	RemotingServiceInfo

Información sobre propiedades

destination

propiedad

destination:String

Versión del lenguaje:

ActionScript 3.0

Versión de producto:

Bloque de construcción Data Dictionary 10

Versiones de motor de ejecución:

AIR (unsupported), Flash Player 10.2

The destination of the Remoting Service.

Implementación
public function get destination():String
public function set destination(value:String):void

endpoint

propiedad

endpoint:String

Versión del lenguaje:

ActionScript 3.0

Versión de producto:

Bloque de construcción Data Dictionary 10

Versiones de motor de ejecución:

AIR (unsupported), Flash Player 10.2

The endpoint of the RemotingServiceInfo.

Implementación
public function get endpoint():String
public function set endpoint(value:String):void

id

propiedad

id:String

Versión del lenguaje:

ActionScript 3.0

Versión de producto:

Bloque de construcción Data Dictionary 10

Versiones de motor de ejecución:

AIR (unsupported), Flash Player 10.2

The unique Id for the RemotingServiceInfo.

Implementación
public function get id():String
public function set id(value:String):void

name

propiedad

name:String

Versión del lenguaje:

ActionScript 3.0

Versión de producto:

Bloque de construcción Data Dictionary 10

Versiones de motor de ejecución:

AIR (unsupported), Flash Player 10.2

The name of Remoting Service.

Implementación
public function get name():String
public function set name(value:String):void

readOperation

propiedad

readOperation:OperationInfo

Versión del lenguaje:

ActionScript 3.0

Versión de producto:

Bloque de construcción Data Dictionary 10

Versiones de motor de ejecución:

AIR (unsupported), Flash Player 10.2

The name of read operation of the Remoting Service.

Implementación
public function get readOperation():OperationInfo
public function set readOperation(value:OperationInfo):void

Información sobre métodos

addEventListener

()

método

 public function addEventListener(type:String, listener:Function, useCapture:Boolean = false, priority:int = 0, weakRef:Boolean = false):void

Registers an event listener object with an EventDispatcher object so that the listener receives notification of an event. You can register event listeners on all nodes in the display list for a specific type of event, phase, and priority.

After you successfully register an event listener, you cannot change its priority through additional calls to addEventListener(). To change a listener's priority, you must first call removeEventListener(). Then you can register the listener again with the new priority level.

After the listener is registered, subsequent calls to addEventListener() with a different value for either type or useCapture result in the creation of a separate listener registration. For example, if you first register a listener with useCapture set to true, it listens only during the capture phase. If you call addEventListener() again using the same listener object, but with useCapture set to false, you have two separate listeners: one that listens during the capture phase, and another that listens during the target and bubbling phases.

You cannot register an event listener for only the target phase or the bubbling phase. Those phases are coupled during registration because bubbling applies only to the ancestors of the target node.

When you no longer need an event listener, remove it by calling EventDispatcher.removeEventListener(); otherwise, memory problems might result. Objects with registered event listeners are not automatically removed from memory because the garbage collector does not remove objects that still have references.

Copying an EventDispatcher instance does not copy the event listeners attached to it. (If your newly created node needs an event listener, you must attach the listener after creating the node.) However, if you move an EventDispatcher instance, the event listeners attached to it move along with it.

If the event listener is being registered on a node while an event is also being processed on this node, the event listener is not triggered during the current phase but may be triggered during a later phase in the event flow, such as the bubbling phase.

If an event listener is removed from a node while an event is being processed on the node, it is still triggered by the current actions. After it is removed, the event listener is never invoked again (unless it is registered again for future processing).

Parámetros

	`type:String` — The type of event.

	`listener:Function` — The listener function that processes the event. This function must accept an event object as its only parameter and must return nothing, as this example shows: `function(evt:Event):void` The function can have any name.

	`useCapture:Boolean` (default = `false`) — Determines whether the listener works in the capture phase or the target and bubbling phases. If `useCapture` is set to `true`, the listener processes the event only during the capture phase and not in the target or bubbling phase. If `useCapture` is `false`, the listener processes the event only during the target or bubbling phase. To listen for the event in all three phases, call `addEventListener()` twice, once with `useCapture` set to `true`, then again with `useCapture` set to `false`.

	`priority:int` (default = `0`) — The priority level of the event listener. Priorities are designated by a 32-bit integer. The higher the number, the higher the priority. All listeners with priority n are processed before listeners of priority n-1. If two or more listeners share the same priority, they are processed in the order in which they were added. The default priority is 0.

	`weakRef:Boolean` (default = `false`) — Determines whether the reference to the listener is strong or weak. A strong reference (the default) prevents your listener from being garbage-collected. A weak reference does not. Class-level member functions are not subject to garbage collection, so you can set `useWeakReference` to `true` for class-level member functions without subjecting them to garbage collection. If you set `useWeakReference` to `true` for a listener that is a nested inner function, the function will be garbge-collected and no longer persistent. If you create references to the inner function (save it in another variable) then it is not garbage-collected and stays persistent.

dispatchEvent

()

método

public function dispatchEvent(event:Event):Boolean

Dispatches an event into the event flow. The event target is the EventDispatcher object upon which dispatchEvent() is called.

Parámetros

event:Event — The event object dispatched into the event flow.

Valor devuelto

Boolean — A value of true unless preventDefault() is called on the event, in which case it returns false.

hasEventListener

()

método

public function hasEventListener(type:String):Boolean

Checks whether the EventDispatcher object has any listeners registered for a specific type of event. This allows you to determine where an EventDispatcher object has altered handling of an event type in the event flow hierarchy. To determine whether a specific event type will actually trigger an event listener, use IEventDispatcher.willTrigger().

The difference between hasEventListener() and willTrigger() is that hasEventListener() examines only the object to which it belongs, whereas willTrigger() examines the entire event flow for the event specified by the type parameter.

Parámetros

type:String — The type of event.

Valor devuelto

Boolean — A value of true if a listener of the specified type is registered; false otherwise.

removeEventListener

()

método

public function removeEventListener(type:String, listener:Function, useCapture:Boolean = false):void

Removes a listener from the EventDispatcher object. If there is no matching listener registered with the EventDispatcher object, a call to this method has no effect.

Parámetros

	`type:String` — The type of event.

	`listener:Function` — The listener object to remove.

	`useCapture:Boolean` (default = `false`) — Specifies whether the listener was registered for the capture phase or the target and bubbling phases. If the listener was registered for both the capture phase and the target and bubbling phases, two calls to `removeEventListener()` are required to remove both: one call with `useCapture` set to `true`, and another call with `useCapture` set to `false`.

willTrigger

()

método

public function willTrigger(type:String):Boolean

Checks whether an event listener is registered with this EventDispatcher object or any of its ancestors for the specified event type. This method returns true if an event listener is triggered during any phase of the event flow when an event of the specified type is dispatched to this EventDispatcher object or any of its descendants.

Parámetros

type:String — The type of event.

Valor devuelto

Boolean — A value of true if a listener of the specified type will be triggered; false otherwise.

Avisos legales | Política de privacidad en línea

RemotingServiceInfo - AS3 Data Dictionary

Clases x

destination

endpoint

id

name

readOperation

addEventListener

dispatchEvent

hasEventListener

removeEventListener

willTrigger