AssetVO

Paket	com.adobe.solutions.prm.vo
Sınıf	public class AssetVO
Miras Alma	AssetVO Object
Uygular	IEventDispatcher

Dil Sürümü:

ActionScript 3.0

Ürün Sürümü:

Project Management Building Block 10.0

Çalışma Zamanı Sürümleri:

Flash Player 10.2, AIR (unsupported)

Defines an asset, that can be associated with a workItem in a project. There is one-to-one relationship between an asset and a workItem.

Genel Özellikler

Miras Alınan Genel Özellikleri Gizle

Miras Alınan Genel Özellikleri Göster

	Özellik		Tanımlayan:
		constructor : Object Belirli bir nesne örneği için sınıf nesnesine veya yapıcı işlevine bir başvuru.	Object
		file : File Defines the content file for an asset.	AssetVO
		id : String Defines the unique identifier for an asset.	AssetVO
		publishingContext : String Do not use.	AssetVO
		publishingPath : String Do not use.	AssetVO
		thumbnailLarge : File Defines the large-sized thumbnail for asset content.	AssetVO
		thumbnailSmall : File Defines the small-sized thumbnail for asset content.	AssetVO
		type : String Defines the type of an asset.	AssetVO
		version : String Defines the version of an asset.	AssetVO

Genel Yöntemler

Miras Alınan Genel Yöntemleri Gizle

Miras Alınan Genel Yöntemleri Göster

	Yöntem		Tanımlayan:
		AssetVO() The constructor for AssetVO class.	AssetVO
		addEventListener(type:String, listener:Function, useCapture:Boolean = false, priority:int = 0, weakRef:Boolean = false):void Registers an event listener object with an EventDispatcher object so that the listener receives notification of an event.	AssetVO
		dispatchEvent(event:Event):Boolean Dispatches an event into the event flow.	AssetVO
		hasEventListener(type:String):Boolean Checks whether the EventDispatcher object has any listeners registered for a specific type of event.	AssetVO
		hasOwnProperty(name:String):Boolean Bir nesnenin belirli bir özelliğinin tanımlı olup olmadığını gösterir.	Object
		isPrototypeOf(theClass:Object):Boolean Object sınıfının bir örneğinin parametre olarak belirtilen nesnenin prototip zincirinde olup olmadığını gösterir.	Object
		propertyIsEnumerable(name:String):Boolean Belirtilen özelliğin bulunup bulunmadığını ve numaralandırılabilir olup olmadığını gösterir.	Object
		removeEventListener(type:String, listener:Function, useCapture:Boolean = false):void Removes a listener from the EventDispatcher object.	AssetVO
		setPropertyIsEnumerable(name:String, isEnum:Boolean = true):void Dinamik bir özelliğin döngü işlemlerinde kullanılabilirliğini ayarlar.	Object
		toLocaleString():String Bu nesnenin, yerel ayara özel kurallara göre biçimlendirilmiş dize temsilini döndürür.	Object
		toString():String Belirtilen nesnenin dize olarak temsil edilen halini döndürür.	Object
		valueOf():Object Belirtilen nesnenin temel değerini döndürür.	Object
		willTrigger(type:String):Boolean Checks whether an event listener is registered with this EventDispatcher object or any of its ancestors for the specified event type.	AssetVO

Özellik Ayrıntısı

file

özellik

file:File

Dil Sürümü:

ActionScript 3.0

Ürün Sürümü:

Project Management Building Block 10.0

Çalışma Zamanı Sürümleri:

Flash Player 10.2, AIR (unsupported)

Defines the content file for an asset.

Uygulama
public function get file():File
public function set file(value:File):void

id

özellik

id:String

Dil Sürümü:

ActionScript 3.0

Ürün Sürümü:

Project Management Building Block 10.0

Çalışma Zamanı Sürümleri:

Flash Player 10.2, AIR (unsupported)

Defines the unique identifier for an asset.

Uygulama
public function get id():String
public function set id(value:String):void

publishingContext

özellik

publishingContext:String

Dil Sürümü:

ActionScript 3.0

Ürün Sürümü:

Project Management Building Block 10.0

Çalışma Zamanı Sürümleri:

Flash Player 10.2, AIR (unsupported)

Do not use. Reserved for future use.

Uygulama
public function get publishingContext():String
public function set publishingContext(value:String):void

publishingPath

özellik

publishingPath:String

Dil Sürümü:

ActionScript 3.0

Ürün Sürümü:

Project Management Building Block 10.0

Çalışma Zamanı Sürümleri:

Flash Player 10.2, AIR (unsupported)

Do not use. Reserved for future use.

Uygulama
public function get publishingPath():String
public function set publishingPath(value:String):void

thumbnailLarge

özellik

thumbnailLarge:File

Dil Sürümü:

ActionScript 3.0

Ürün Sürümü:

Project Management Building Block 10.0

Çalışma Zamanı Sürümleri:

Flash Player 10.2, AIR (unsupported)

Defines the large-sized thumbnail for asset content. Please note that the thumbnails are generated asynchronously, so a thumbnail may not be instantly available.

Uygulama
public function get thumbnailLarge():File
public function set thumbnailLarge(value:File):void

thumbnailSmall

özellik

thumbnailSmall:File

Dil Sürümü:

ActionScript 3.0

Ürün Sürümü:

Project Management Building Block 10.0

Çalışma Zamanı Sürümleri:

Flash Player 10.2, AIR (unsupported)

Defines the small-sized thumbnail for asset content. Please note that te thumbnails are generated asynchronously, so a thumbnail may not be instantly available.

Uygulama
public function get thumbnailSmall():File
public function set thumbnailSmall(value:File):void

type

özellik

type:String

Dil Sürümü:

ActionScript 3.0

Ürün Sürümü:

Project Management Building Block 10.0

Çalışma Zamanı Sürümleri:

Flash Player 10.2, AIR (unsupported)

Defines the type of an asset. It can be any value, as desired by the user. No value is specified in the default implementation. A user-defined, custom value can be used to differentiate between different types of assets.

Uygulama
public function get type():String
public function set type(value:String):void

version

özellik

version:String

Dil Sürümü:

ActionScript 3.0

Ürün Sürümü:

Project Management Building Block 10.0

Çalışma Zamanı Sürümleri:

Flash Player 10.2, AIR (unsupported)

Defines the version of an asset. It can be any string value, as desired by the user. The default implementation uses major version to represent an increment in the version, minor version is always. For example, 1.0, 2.0, and so on.

Uygulama
public function get version():String
public function set version(value:String):void

Yapıcı Ayrıntı

()

Yapıcı

public function AssetVO()

Dil Sürümü:

ActionScript 3.0

Ürün Sürümü:

Project Management Building Block 10.0

Çalışma Zamanı Sürümleri:

Flash Player 10.2, AIR (unsupported)

The constructor for AssetVO class.

Yöntem Ayrıntısı

addEventListener

()

yöntem

 public function addEventListener(type:String, listener:Function, useCapture:Boolean = false, priority:int = 0, weakRef:Boolean = false):void

Registers an event listener object with an EventDispatcher object so that the listener receives notification of an event. You can register event listeners on all nodes in the display list for a specific type of event, phase, and priority.

After you successfully register an event listener, you cannot change its priority through additional calls to addEventListener(). To change a listener's priority, you must first call removeEventListener(). Then you can register the listener again with the new priority level.

After the listener is registered, subsequent calls to addEventListener() with a different value for either type or useCapture result in the creation of a separate listener registration. For example, if you first register a listener with useCapture set to true, it listens only during the capture phase. If you call addEventListener() again using the same listener object, but with useCapture set to false, you have two separate listeners: one that listens during the capture phase, and another that listens during the target and bubbling phases.

You cannot register an event listener for only the target phase or the bubbling phase. Those phases are coupled during registration because bubbling applies only to the ancestors of the target node.

When you no longer need an event listener, remove it by calling EventDispatcher.removeEventListener(); otherwise, memory problems might result. Objects with registered event listeners are not automatically removed from memory because the garbage collector does not remove objects that still have references.

Copying an EventDispatcher instance does not copy the event listeners attached to it. (If your newly created node needs an event listener, you must attach the listener after creating the node.) However, if you move an EventDispatcher instance, the event listeners attached to it move along with it.

If the event listener is being registered on a node while an event is also being processed on this node, the event listener is not triggered during the current phase but may be triggered during a later phase in the event flow, such as the bubbling phase.

If an event listener is removed from a node while an event is being processed on the node, it is still triggered by the current actions. After it is removed, the event listener is never invoked again (unless it is registered again for future processing).

Parametreler

	`type:String` — The type of event.

	`listener:Function` — The listener function that processes the event. This function must accept an event object as its only parameter and must return nothing, as this example shows: `function(evt:Event):void` The function can have any name.

	`useCapture:Boolean` (default = `false`) — Determines whether the listener works in the capture phase or the target and bubbling phases. If `useCapture` is set to `true`, the listener processes the event only during the capture phase and not in the target or bubbling phase. If `useCapture` is `false`, the listener processes the event only during the target or bubbling phase. To listen for the event in all three phases, call `addEventListener()` twice, once with `useCapture` set to `true`, then again with `useCapture` set to `false`.

	`priority:int` (default = `0`) — The priority level of the event listener. Priorities are designated by a 32-bit integer. The higher the number, the higher the priority. All listeners with priority n are processed before listeners of priority n-1. If two or more listeners share the same priority, they are processed in the order in which they were added. The default priority is 0.

	`weakRef:Boolean` (default = `false`) — Determines whether the reference to the listener is strong or weak. A strong reference (the default) prevents your listener from being garbage-collected. A weak reference does not. Class-level member functions are not subject to garbage collection, so you can set `useWeakReference` to `true` for class-level member functions without subjecting them to garbage collection. If you set `useWeakReference` to `true` for a listener that is a nested inner function, the function will be garbge-collected and no longer persistent. If you create references to the inner function (save it in another variable) then it is not garbage-collected and stays persistent.

dispatchEvent

()

yöntem

public function dispatchEvent(event:Event):Boolean

Dispatches an event into the event flow. The event target is the EventDispatcher object upon which dispatchEvent() is called.

Parametreler

event:Event — The event object dispatched into the event flow.

Döndürür

Boolean — A value of true unless preventDefault() is called on the event, in which case it returns false.

hasEventListener

()

yöntem

public function hasEventListener(type:String):Boolean

Checks whether the EventDispatcher object has any listeners registered for a specific type of event. This allows you to determine where an EventDispatcher object has altered handling of an event type in the event flow hierarchy. To determine whether a specific event type will actually trigger an event listener, use IEventDispatcher.willTrigger().

The difference between hasEventListener() and willTrigger() is that hasEventListener() examines only the object to which it belongs, whereas willTrigger() examines the entire event flow for the event specified by the type parameter.

Parametreler

type:String — The type of event.

Döndürür

Boolean — A value of true if a listener of the specified type is registered; false otherwise.

removeEventListener

()

yöntem

public function removeEventListener(type:String, listener:Function, useCapture:Boolean = false):void

Removes a listener from the EventDispatcher object. If there is no matching listener registered with the EventDispatcher object, a call to this method has no effect.

Parametreler

	`type:String` — The type of event.

	`listener:Function` — The listener object to remove.

	`useCapture:Boolean` (default = `false`) — Specifies whether the listener was registered for the capture phase or the target and bubbling phases. If the listener was registered for both the capture phase and the target and bubbling phases, two calls to `removeEventListener()` are required to remove both: one call with `useCapture` set to `true`, and another call with `useCapture` set to `false`.

willTrigger

()

yöntem

public function willTrigger(type:String):Boolean

Checks whether an event listener is registered with this EventDispatcher object or any of its ancestors for the specified event type. This method returns true if an event listener is triggered during any phase of the event flow when an event of the specified type is dispatched to this EventDispatcher object or any of its descendants.

Parametreler

type:String — The type of event.

Döndürür

Boolean — A value of true if a listener of the specified type will be triggered; false otherwise.

Yasal Uyarılar | Çevrimiçi Gizlilik İlkesi

AssetVO - AS3 Project Management

Sınıflar x

file

id

publishingContext

publishingPath

thumbnailLarge

thumbnailSmall

type

version

AssetVO

addEventListener

dispatchEvent

hasEventListener

removeEventListener

willTrigger