Validate PDF/A operationInput propertiesProperties for specifying the PDF document and the options
to use for PDF/A validation.
Input PDF DocumentA document value that represents
the PDF document to be validated as PDF/A.
If you provide
a literal value, clicking the ellipsis button displays
the Select Asset dialog box. (See About Select Asset.)
PDF/A Options(Optional) A PDFAValidationOptionSpec value
that represents the options to be used for validation.
If
you provide a literal value, specify the following values.
- Compliance:
- The compliance level of the PDF document. The only value
is PDFA_1B, which is the minimal level for documents scanned from
paper or microfiche sources.
- Result level:
- The default is PASS_FAIL. The following
values are valid.
PASS_FAIL: A report contains
the following information about the operation result:
Whether the operation was successful
Whether the PDF document is PDF/A compliant
Whether certified digital signatures are permitted
SUMMARY: A report contains the following information
about the operation result:
Whether the operation
was successful
Whether the PDF document is PDF/A compliant
Whether certified digital signatures are permitted
A summarized count of any validation errors that occurred
DETAILED: A report contains the following information
about the operation result:
Whether the operation
was successful
Whether the PDF document is PDF/A compliant
Whether certified digital signatures are permitted
A list of each error that occurred with specific information
about each error
- Allow Certification Signatures:
- The default is True, which means that certification
signatures are permitted.
- Ignore Unused Resources:
- Sets whether to perform validation on resources that are
not used in the PDF document. The default is True,
which means not to perform validation on unused resources.
- Job Log Level:
- Sets the log level for this operation. The default is INFO.
The following values can be used.
- OFF:
- Turn off logging of messages on the server.
- SEVERE:
- Log messages only when they indicate a serious failure.
- WARNING:
- Log messages that indicate potential problems and serious failures.
- INFO:
- Log messages that are for informational purposes, indicate
potential problems, and indicate serious failures.
- CONFIG:
- Log only static configuration messages.
- FINE:
- Log tracing information.
- FINER:
- Log fairly detailed tracing information.
- FINEST:
- Log highly detailed tracing information.
Note: The
use of FINE, FINER, and FINEST will negatively impact performance
on the server. Use them for debugging purposes only.
Output propertiesProperty for specifying the result of the operation.
PDF /Validation ResultThe location to store the results of
the operation, which includes the Job log file, the converted PDF
document, and the validation report. The data type is com.adobe.livecycle.docconverter.client.PDFAValidationResult.
Convert to PDF/A operationConverts
a PDF document to PDF/A format using the options provided.
For information about the General and Route Evaluation property
groups, see Common operation properties.
Input propertiesProperties for specifying the input DDX file and optional
documents and environmental values.
Input PDF DocumentA document value that represents
the PDF document to be validated as PDF/A.
If you provide
a literal value, clicking the ellipsis button displays
the Select Asset dialog box. (See About Select Asset.)
PDF/A Conversion OptionsA PDFAConversionOptionSpec value
that represents the options to be used for validation.
If
you provide a literal value, specify the following values.
- Compliance:
- The compliance level for converting to PDF/A. The default
is PDFA_1B, which is the minimal level for documents
scanned from paper or microfiche sources.
- Result level:
- The level of reporting when the operation runs. The default
is PASS_FAIL. The following values are valid.
- PASS_FAIL: A report contains the following information
about the operation result:
- Whether the operation was successful
- SUMMARY: A report contains the following information
about the operation result:
- Whether the operation was successful
Whether
the PDF document is PDF/A compliant
Whether certified digital signatures are permitted
A summarized count of any validation errors that occurred
- DETAILED: A report contains the following information
about the operation result:
- Whether the operation was successful
Whether
the PDF document is PDF/A compliant
Whether certified digital signatures are permitted
A list of each error that occurred with specific information
about each error
- Signatures:
- Sets whether to archive a digital signature. The default
is ARCHIVE_AS_NEEDED. The following values are
valid.
- ARCHIVE_AS_NEEDED:
- Signatures are archived only when the signature can no longer
be maintained in the PDF document.
- ARCHIVE_ALWAYS:
- Signatures are archived regardless of their validity in the resulting
PDF/A.
- Color Space:
- The color space management scheme to use. The default is S_RGB.
The following values are valid.
- S_RGB:
- Standard RGB IEC61966-2.1
- COATED_FOGRA27:
- Europe ISO Coated FOGRA27
- JAPAN_COLOR_COATED:
- Japan Color 2001 Coated
- SWOP:
- U.S. Web Coated (SWOP) v2
- Job Log Level:
- Sets the log level for this operation. The default is INFO.
The following values can be used.
- OFF:
- Turn off logging of messages on the server.
- SEVERE:
- Log messages only when they indicate a serious failure.
- WARNING:
- Log messages that indicate potential problems and serious failures.
- INFO:
- Log messages that are for informational purposes, indicate
potential problems, and indicate serious failures.
- CONFIG:
- Log only static configuration messages.
- FINE:
- Log tracing information.
- FINER:
- Log fairly detailed tracing information.
- FINEST:
- Log highly detailed tracing information.
Note: The
use of FINE, FINER, and FINEST will negatively impact performance
on the server. Use them for debugging purposes only.
Output propertiesProperty for specifying the result of the operation.
PDF/A Conversion ResultThe location to store the results of
the operation, which include the Job log file, the converted PDF
document, and the conversion report. The data type is PDFAConversionResult.
DocConverter exceptionsThe
DocConverter service provides the following exceptions for throwing exception
events.
ConversionExceptionThrown if an error occurs during conversion of a PDF document
to PDF/A format.
ValidationExceptionThrown if an error occurs during validation of a PDF document.
Note: To receive an OperationException exception,
ensure that the variable defined to contain the exception data is
at least 150 characters long.
|
|
|