|
You can use the Output and Assembler services
to create an output stream, such as a PDF document, that is based
on fragments. The Assembler service assembles an XDP document that
is based on fragments located in multiple XDP files. The assembled
XDP document is passed to the Output service, which creates a PDF
document. Although this workflow shows a PDF document being generated,
the Output service can generate other output types, such as ZPL,
for this workflow. A PDF document is used for discussion purposes
only.
The following illustration shows this workflow.
Before reading Creating PDF Documents using Fragments,
it is recommended that you become familiar with using the Assembler
service to assemble multiple XDP documents. (See Assembling Multiple XDP Fragments.)
注意： You can also pass a form design assembled by
the Assembler service to the Forms service instead of the Output
service. The primary difference between the Output service and Forms
service is that the Forms service generates interactive PDF documents
and the Output service produces non-interactive PDF documents. Also the
Forms service cannot generate printer-based output streams like
ZPL.
Summary of stepsTo create a PDF document based on fragments,
perform the following steps:
Include project files.
Create an Output and Assembler Client object.
Use the Assembler service to generate the form design.
Use the Output service to generate the PDF document.
Save the PDF document as a PDF file.
Include project filesInclude necessary files in your development
project. If you are creating a client application by using Java,
include the necessary JAR files. If you are using web services,
make sure that you include the proxy files.
Create an Output and Assembler Client objectBefore you can programmatically
perform an Output service API operation, create an Output Client
API object. Also, because this workflow invokes the Assembler service
to create the form design, create an Assembler Client API object.
Use the Assembler service to generate the form designUse
the Assembler service to generate the form design using fragments.
The Assembler service returns a com.adobe.idp.Document instance
that contains the form design.
Use the Output service to generate the PDF documentYou can
use the Output service to generate a PDF document using the form design
that the Assembler service created. Pass the com.adobe.idp.Document instance
that the Assembler service returned to the Output service.
Save the PDF document as a PDF fileAfter the Output service
generates a PDF document, you can save it as a PDF file.
Create a PDF document based on fragments using the Java APICreate a PDF document based on fragments by using the Output Service
API and Assembler Service API (Java):
Include project files.
Include client JAR files,
such as adobe-output-client.jar, in your Java project’s class path.
Create an Output and Assembler Client object.
Create a ServiceClientFactory object that
contains connection properties.
Create an OutputClient object by using its
constructor and passing the ServiceClientFactory object.
Create an AssemblerServiceClient object
by using its constructor and passing the ServiceClientFactory object.
Use the Assembler service to generate the form design.
Invoke
the AssemblerServiceClient object’s invokeDDX method
and pass the following required values:
A com.adobe.idp.Document object
that represents the DDX document to use.
A java.util.Map object that contains the
input XDP files.
A com.adobe.livecycle.assembler.client.AssemblerOptionSpec object
that specifies the run-time options, including the default font
and the job log level.
The invokeDDX method
returns a com.adobe.livecycle.assembler.client.AssemblerResult object
that contains the assembled XDP document. To retrieve the assembled
XDP document, perform the following actions:
Invoke
the AssemblerResult object’s getDocuments method.
This method returns a java.util.Map object.
Iterate through the java.util.Map object
until you find the resultant com.adobe.idp.Document object.
Invoke the com.adobe.idp.Document object’s copyToFile method
to extract the assembled XDP document.
Use the Output service to generate the PDF document.
Invoke
the OutputClient object’s generatePDFOutput2 method
and pass the following values:
A TransformationFormat enumeration
value. To generate a PDF document, specify TransformationFormat.PDF
A string value that specifies the content root where the
additional resources, such as images, are located
A com.adobe.idp.Document object that represents
the form design (use the instance returned by the Assembler service)
A PDFOutputOptionsSpec object that contains
PDF run-time options
A RenderOptionsSpec object that contains
rendering run-time options
The com.adobe.idp.Document object that contains
the XML data source that contains data to merge with the form design
The generatePDFOutput2 method
returns an OutputResult object that contains the
results of the operation
Save the PDF document as a PDF file.
Retrieve
a com.adobe.idp.Document object that represents
the PDF document by invoking the OutputResult object’s getGeneratedDoc method.
Create a java.io.File object that contains
the results of the operation. Ensure that the filename extension
is .pdf.
Invoke the com.adobe.idp.Document object’s copyToFile method
to copy the contents of the com.adobe.idp.Document object
to the file. (Ensure that you use the com.adobe.idp.Document object
that the getGeneratedDoc method returned.).
Create a PDF document based on fragments using the web service APICreate a PDF document based on fragments by using the Output Service
API and Assembler Service API (web service):
Include project files.
Create a Microsoft .NET
project that uses MTOM. Use the following WSDL definition for the
service reference associated with the Output service:
http://localhost:8080/soap/services/OutputService?WSDL&lc_version=9.0.1.
Use
the following WSDL definition for the service reference associated with
the Assembler service:
http://localhost:8080/soap/services/AssemblerService?WSDL&lc_version=9.0.1.
Because
the BLOB data type is common to both service references,
fully qualify the BLOB data type when using it.
In the corresponding web service quick start, all BLOB instances
are fully qualified.
注意： Replace localhost with the IP address of the server hosting LiveCycle.
Create an Output and Assembler Client object.
Create an OutputServiceClient object by
using its default constructor.
Create an OutputServiceClient.Endpoint.Address object
by using the System.ServiceModel.EndpointAddress constructor.
Pass a string value that specifies the WSDL to the LiveCycle service (for example, http://localhost:8080/soap/services/OutputService?blob=mtom.)
You do not need to use the lc_version attribute.
This attribute is used when you create a service reference. However,
specify ?blob=mtom to use MTOM.
Create a System.ServiceModel.BasicHttpBinding object
by getting the value of the OutputServiceClient.Endpoint.Binding field.
Cast the return value to BasicHttpBinding.
Set the System.ServiceModel.BasicHttpBinding object’s MessageEncoding field
to WSMessageEncoding.Mtom. This value ensures that
MTOM is used.
Enable basic HTTP authentication by performing the following tasks:
Assign the LiveCycle user name to the OutputServiceClient.ClientCredentials.UserName.UserName field.
Assign the corresponding password value to the OutputServiceClient.ClientCredentials.UserName.Password field.
Assign the constant value HttpClientCredentialType.Basic to
the BasicHttpBindingSecurity.Transport.ClientCredentialType field.
Assign the BasicHttpSecurityMode.TransportCredentialOnly constant
value to the BasicHttpBindingSecurity.Security.Mode field.
注意： Repeat these steps for the AssemblerServiceClient object.
Use the Assembler service to generate the form design.
Invoke
the AssemblerServiceClient object’s invokeDDX method
and pass the following values:
A BLOB object
that represents the DDX document
The MyMapOf_xsd_string_To_xsd_anyType object
that contains the required files
An AssemblerOptionSpec object that specifies
run-time options
The invokeDDX method
returns an AssemblerResult object that contains
the results of the job and any exceptions that occurred. To obtain
the newly created XDP document, perform the following actions:
Access the AssemblerResult object’s documents field,
which is a Map object that contains the resultant
PDF documents.
Iterate through the Map object to retrieve the
assembled form design. Cast that array member’s value to
a BLOB. Pass this BLOB instance
to the Output service.
Use the Output service to generate the PDF document.
Invoke
the OutputServiceClient object’s generatePDFOutput2 method
and pass the following values:
A TransformationFormat enumeration
value. To generate a PDF document, specify TransformationFormat.PDF.
A string value that specifies the content root where the
additional resources, such as images, are located.
A BLOB object that represents the form design
(use the BLOB instance returned by the Assembler
service).
A PDFOutputOptionsSpec object that contains
PDF run-time options.
A RenderOptionsSpec object that contains
rendering run-time options.
The BLOB object that contains the XML data source
that contains data to merge with the form design.
An output BLOB object that the generatePDFOutput2 method
populates. The generatePDFOutput2 method populates
this object with generated metadata that describes the document.
(This parameter value is required only for web service invocation).
An output OutputResult object that contains
the results of the operation. (This parameter value is required
only for web service invocation).
The generatePDFOutput2 method
returns a BLOB object that contains the non-interactive
PDF form.
Save the PDF document as a PDF file.
Create
a System.IO.FileStream object by invoking its constructor.
Pass a string value that represents the file location of the interactive
PDF document and the mode in which to open the file.
Create a byte array that stores the content of the BLOB object
retrieved from the generatePDFOutput2 method. Populate
the byte array by getting the value of the BLOB object’s MTOM data
member.
Create a System.IO.BinaryWriter object by
invoking its constructor and passing the System.IO.FileStream object.
Write the contents of the byte array to a PDF file by invoking
the System.IO.BinaryWriter object’s Write method
and passing the byte array.
|
|
|
