Prepopulating Forms with Flowable Layouts

Forms with flowable layouts are useful to display an undetermined amount of data to users. Because the layout of the form adjusts automatically to the amount of data that is merged, you do not need to predetermine a fixed layout or number of pages for the form as you need to do with a form with a fixed layout.

A form is typically populated with data that is obtained during run-time. As a result, you can prepopulate a form by creating an in-memory XML data source and placing the data directly into the in-memory XML data source.

Consider a web-based application, such as an online store. After an online shopper finishes purchasing items, all purchased items are placed into an in-memory XML data source that is used to prepopulate a form. The following diagram shows this process, which is explained in the table following the diagram.

フルサイズのグラフィックを表示

The following table describes the steps in this diagram.

The following diagram shows an example of a purchase order form. The information in the table can adjust to the number of records in the XML data.

フルサイズのグラフィックを表示

Forms with flowable layouts are based on form designs that are created in Designer. A form design specifies a set of layout, presentation, and data capture rules, including calculating values based on user input. The rules are applied when data is entered into a form. Fields that are added to a form are subforms that are within the form design. For example, in the purchase order form shown in the previous diagram, each line is a subform. For information about creating a form design that contains subforms, see Creating a purchase order form that has a flowable layout.

An XML data source is used to prepopulate forms with fixed layouts and flowable layouts. However, the difference is that an XML data source that prepopulates a form with a flowable layout contains repeating XML elements that are used to prepopulate subforms that are repeated within the form. These repeating XML elements are called data subgroups.

An XML data source that is used to prepopulate the purchase order form shown in the previous diagram contains four repeating data subgroups. Each data subgroup corresponds to a purchased item. The purchased items are a monitor, a desk lamp, a phone, and an address book.

The following XML data source is used to prepopulate the purchase order form.

    <header>  
        <!-- XML elements used to prepopulate non-repeating fields such as address 
        <!and city  
        <txtPONum>8745236985</txtPONum>  
        <dtmDate>2004-02-08</dtmDate>  
        <txtOrderedByCompanyName>Any Company Name</txtOrderedByCompanyName>  
        <txtOrderedByAddress>555, Any Blvd.</txtOrderedByAddress>  
        <txtOrderedByCity>Any City</txtOrderedByCity>  
        <txtOrderedByStateProv>ST</txtOrderedByStateProv>  
        <txtOrderedByZipCode>12345</txtOrderedByZipCode>  
        <txtOrderedByCountry>Any Country</txtOrderedByCountry>  
        <txtOrderedByPhone>(123) 456-7890</txtOrderedByPhone>  
        <txtOrderedByFax>(123) 456-7899</txtOrderedByFax>  
        <txtOrderedByContactName>Contact Name</txtOrderedByContactName>  
        <txtDeliverToCompanyName>Any Company Name</txtDeliverToCompanyName>  
        <txtDeliverToAddress>7895, Any Street</txtDeliverToAddress>  
        <txtDeliverToCity>Any City</txtDeliverToCity>  
        <txtDeliverToStateProv>ST</txtDeliverToStateProv>  
        <txtDeliverToZipCode>12346</txtDeliverToZipCode>  
        <txtDeliverToCountry>Any Country</txtDeliverToCountry>  
        <txtDeliverToPhone>(123) 456-7891</txtDeliverToPhone>  
        <txtDeliverToFax>(123) 456-7899</txtDeliverToFax>  
        <txtDeliverToContactName>Contact Name</txtDeliverToContactName>  
    </header>  
    <detail>  
        <!-- A data subgroup that contains information about the monitor> 
        <txtPartNum>00010-100</txtPartNum>  
        <txtDescription>Monitor</txtDescription>  
        <numQty>1</numQty>  
        <numUnitPrice>350.00</numUnitPrice>  
    </detail>  
    <detail>  
        <!-- A data subgroup that contains information about the desk lamp> 
        <txtPartNum>00010-200</txtPartNum>  
        <txtDescription>Desk lamps</txtDescription>  
        <numQty>3</numQty>  
        <numUnitPrice>55.00</numUnitPrice>  
    </detail>  
    <detail> 
        <!-- A data subgroup that contains information about the Phone> 
            <txtPartNum>00025-275</txtPartNum>  
            <txtDescription>Phone</txtDescription>  
            <numQty>5</numQty>  
            <numUnitPrice>85.00</numUnitPrice>  
    </detail>  
    <detail> 
        <!-- A data subgroup that contains information about the address book> 
        <txtPartNum>00300-896</txtPartNum>  
        <txtDescription>Address book</txtDescription>  
        <numQty>2</numQty>  
        <numUnitPrice>15.00</numUnitPrice>  
    </detail>

Notice that each data subgroup contains four XML elements that correspond to this information:

• Items part number

• Items description

• Quantity of items

• Unit price

The name of a data subgroup’s parent XML element must match the name of the subform that is located in the form design. For example, in the previous diagram, notice that the name of the data subgroup’s parent XML element is detail. This corresponds to the name of the subform that is located in the form design on which the purchase order form is based. If the name of the data subgroup’s parent XML element and the subform do not match, a server-side form is not prepopulated.

Each data subgroup must contain XML elements that match the field names in the subform. The detail subform located in the form design contains the following fields:

• txtPartNum

• txtDescription

• numQty

• numUnitPrice

To prepopulate a form with a flowable layout, perform the following tasks:

1. Include project files.

2. Create an in-memory XML data source.

3. Convert the XML data source.

4. Render a prepopulated form.

To prepopulate a form with a flowable layout by using the Forms API (Java), perform the following steps:

1. Include project files

   Include client JAR files, such as adobe-forms-client.jar, in your Java project’s class path. For information about the location of these files, see Including LiveCycle Java library files.

2. Create an in-memory XML data source

   • Create a Java DocumentBuilderFactory object by calling the DocumentBuilderFactory class’ newInstance method.

   • Create a Java DocumentBuilder object by calling the DocumentBuilderFactory object’s newDocumentBuilder method.

   • Call the DocumentBuilder object’s newDocument method to instantiate a org.w3c.dom.Document object.

   • Create the XML data source’s root element by invoking the org.w3c.dom.Document object’s createElement method. This creates an Element object that represents the root element. Pass a string value representing the name of the element to the createElement method. Cast the return value to Element. Next, append the root element to the document by calling the Document object’s appendChild method, and pass the root element object as an argument. The following lines of code shows this application logic:

     Element root = (Element)document.createElement("transaction"); 
     document.appendChild(root);

   • Create the XML data source’s header element by calling the Document object’s createElement method. Pass a string value representing the name of the element to the createElement method. Cast the return value to Element. Next, append the header element to the root element by calling the root object’s appendChild method, and pass the header element object as an argument. The XML elements that are appended to the header element correspond to the static portion of the form. The following lines of code show this application logic:

     Element header = (Element)document.createElement("header"); 
     root.appendChild(header);

   • Create a child element that belongs to the header element by calling the Document object’s createElement method, and pass a string value that represents the element’s name. Cast the return value to Element. Next, set a value for the child element by calling its appendChild method, and pass the Document object’s createTextNode method as an argument. Specify a string value that appears as the child element’s value. Finally, append the child element to the header element by calling the header element’s appendChild method, and pass the child element object as an argument. The following lines of code show this application logic:

     Element poNum= (Element)document.createElement("txtPONum"); 
     poNum.appendChild(document.createTextNode("8745236985")); 
     header.appendChild(LastName);

   • Add all remaining elements to the header element by repeating the last sub-step for each field appearing in the static portion of the form (in the XML data source diagram, these fields are shown in section A. (See Understanding data subgroups.)

   • Create the XML data source’s detail element by calling the Document object’s createElement method. Pass a string value representing the name of the element to the createElement method. Cast the return value to Element. Next, append the detail element to the root element by calling the root object’s appendChild method, and pass the detail element object as an argument. The XML elements that are appended to the detail element correspond to the dynamic portion of the form. The following lines of code show this application logic:

     Element detail = (Element)document.createElement("detail"); 
     root.appendChild(detail);

   • Create a child element that belongs to the detail element by calling the Document object’s createElement method, and pass a string value that represents the element’s name. Cast the return value to Element. Next, set a value for the child element by calling its appendChild method, and pass the Document object’s createTextNode method as an argument. Specify a string value that appears as the child element’s value. Finally, append the child element to the detail element by calling the detail element’s appendChild method, and pass the child element object as an argument. The following lines of code show this application logic:

     Element txtPartNum = (Element)document.createElement("txtPartNum"); 
     txtPartNum.appendChild(document.createTextNode("00010-100")); 
     detail.appendChild(txtPartNum);

   • Repeat the last sub-step for all XML elements to append to the detail element. To properly create the XML data source used to populate the purchase order form, you must append the following XML elements to the detail element: txtDescription, numQty, and numUnitPrice.

   • Repeat the last two sub-steps for all data items used to prepopulate the form.

3. Convert the XML data source

   • Create a javax.xml.transform.Transformer object by invoking the javax.xml.transform.Transformer object’s static newInstance method.

   • Create a Transformer object by invoking the TransformerFactory object’s newTransformer method.

   • Create a ByteArrayOutputStream object by using its constructor.

   • Create a javax.xml.transform.dom.DOMSource object by using its constructor and passing the org.w3c.dom.Document object that was created in step 1.

   • Create a javax.xml.transform.dom.DOMSource object by using its constructor and passing the ByteArrayOutputStream object.

   • Populate the Java ByteArrayOutputStream object by invoking the javax.xml.transform.Transformer object’s transform method and passing the javax.xml.transform.dom.DOMSource and the javax.xml.transform.stream.StreamResult objects.

   • Create a byte array and allocate the size of the ByteArrayOutputStream object to the byte array.

   • Populate the byte array by invoking the ByteArrayOutputStream object’s toByteArray method.

   • Create a com.adobe.idp.Document object by using its constructor and passing the byte array.

4. Render a prepopulated form

   Invoke the FormsServiceClient object’s renderPDFForm method and pass the following values:

   • A string value that specifies the form design name, including the file name extension.

   • A com.adobe.idp.Document object that contains data to merge with the form. Ensure that you use the com.adobe.idp.Document object created in steps one and two.

   • A PDFFormRenderSpec object that stores run-time options.

   • A URLSpec object that contains URI values that are required by the Forms service.

   • A java.util.HashMap object that stores file attachments. This is an optional parameter and you can specify null if you do not want to attach files to the form.

   The renderPDFForm method returns a FormsResult object that contains a form data stream that must be written to the client web browser.

   • Create a javax.servlet.ServletOutputStream object used to send a form data stream to the client web browser.

   • Create a com.adobe.idp.Document object by invoking the FormsResult object ‘s getOutputContent method.

   • Create a java.io.InputStream object by invoking the com.adobe.idp.Document object’s getInputStream method.

   • Create a byte array populate it with the form data stream by invoking the InputStream object’s read method and passing the byte array as an argument.

   • Invoke the javax.servlet.ServletOutputStream object’s write method to send the form data stream to the client web browser. Pass the byte array to the write method.

To prepopulate a form with a flowable layout by using the Forms API (web service), perform the following steps:

1. Include project files

   • Create Java proxy classes that consume the Forms service WSDL. (See Creating Java proxy classes using Apache Axis.)

   • Include the Java proxy classes into your class path.

2. Create an in-memory XML data source

   • Create a Java DocumentBuilderFactory object by calling the DocumentBuilderFactory class’ newInstance method.

   • Create a Java DocumentBuilder object by calling the DocumentBuilderFactory object’s newDocumentBuilder method.

   • Call the DocumentBuilder object’s newDocument method to instantiate a org.w3c.dom.Document object.

   • Create the XML data source’s root element by invoking the org.w3c.dom.Document object’s createElement method. This creates an Element object that represents the root element. Pass a string value representing the name of the element to the createElement method. Cast the return value to Element. Next, append the root element to the document by calling the Document object’s appendChild method, and pass the root element object as an argument. The following lines of code show this application logic:

     Element root = (Element)document.createElement("transaction"); 
     document.appendChild(root);

   • Create the XML data source’s header element by calling the Document object’s createElement method. Pass a string value representing the name of the element to the createElement method. Cast the return value to Element. Next, append the header element to the root element by calling the root object’s appendChild method, and pass the header element object as an argument. The XML elements that are appended to the header element correspond to the static portion of the form. The following lines of code show this application logic:

     Element header = (Element)document.createElement("header"); 
     root.appendChild(header);

   • Create a child element that belongs to the header element by calling the Document object’s createElement method, and pass a string value that represents the element’s name. Cast the return value to Element. Next, set a value for the child element by calling its appendChild method, and pass the Document object’s createTextNode method as an argument. Specify a string value that appears as the child element’s value. Finally, append the child element to the header element by calling the header element’s appendChild method, and pass the child element object as an argument. The following lines of code shows this application logic:

     Element poNum= (Element)document.createElement("txtPONum"); 
     poNum.appendChild(document.createTextNode("8745236985")); 
     header.appendChild(LastName);

   • Add all remaining elements to the header element by repeating the last sub-step for each field appearing in the static portion of the form (in the XML data source diagram, these fields are shown in section A. (See Understanding data subgroups.)

   • Create the XML data source’s detail element by calling the Document object’s createElement method. Pass a string value representing the name of the element to the createElement method. Cast the return value to Element. Next, append the detail element to the root element by calling the root object’s appendChild method, and pass the detail element object as an argument. The XML elements that are appended to the detail element correspond to the dynamic portion of the form. The following lines of code shows this application logic:

     Element detail = (Element)document.createElement("detail"); 
     root.appendChild(detail);

   • Create a child element that belongs to the detail element by calling the Document object’s createElement method, and pass a string value that represents the element’s name. Cast the return value to Element. Next, set a value for the child element by calling its appendChild method, and pass the Document object’s createTextNode method as an argument. Specify a string value that appears as the child element’s value. Finally, append the child element to the detail element by calling the detail element’s appendChild method, and pass the child element object as an argument. The following lines of code shows this application logic:

     Element txtPartNum = (Element)document.createElement("txtPartNum"); 
     txtPartNum.appendChild(document.createTextNode("00010-100")); 
     detail.appendChild(txtPartNum);

   • Repeat the last sub-step for all XML elements to append to the detail element. To properly create the XML data source used to populate the purchase order form, you must append the following XML elements to the detail element: txtDescription, numQty, and numUnitPrice.

   • Repeat the last two sub-steps for all data items used to prepopulate the form.

3. Convert the XML data source

   • Create a javax.xml.transform.Transformer object by invoking the javax.xml.transform.Transformer object’s static newInstance method.

   • Create a Transformer object by invoking the TransformerFactory object’s newTransformer method.

   • Create a ByteArrayOutputStream object by using its constructor.

   • Create a javax.xml.transform.dom.DOMSource object by using its constructor and passing the org.w3c.dom.Document object that was created in step 1.

   • Create a javax.xml.transform.dom.DOMSource object by using its constructor and passing the ByteArrayOutputStream object.

   • Populate the Java ByteArrayOutputStream object by invoking the javax.xml.transform.Transformer object’s transform method and passing the javax.xml.transform.dom.DOMSource and the javax.xml.transform.stream.StreamResult objects.

   • Create a byte array and allocate the size of the ByteArrayOutputStream object to the byte array.

   • Populate the byte array by invoking the ByteArrayOutputStream object’s toByteArray method.

   • Create a BLOB object by using its constructor and invoke its setBinaryData method and pass the byte array.

4. Render a prepopulated form

   Invoke the FormsService object’s renderPDFForm method and pass the following values:

   • A string value that specifies the form design name, including the file name extension.

   • A BLOB object that contains data to merge with the form. Ensure that you use the BLOB object that was created in steps one and two.

   • A PDFFormRenderSpecc object that stores run-time options. For more information, see LiveCycle API Reference.

   • A URLSpec object that contains URI values that are required by the Forms service.

   • A java.util.HashMap object that stores file attachments. This is an optional parameter and you can specify null if you do not want to attach files to the form.

   • An empty com.adobe.idp.services.holders.BLOBHolder object that is populated by the method. This is used to store the rendered PDF form.

   • An empty javax.xml.rpc.holders.LongHolder object that is populated by the method. (This argument will store the number of pages in the form).

   • An empty javax.xml.rpc.holders.StringHolder object that is populated by the method. (This argument will store the locale value).

   • An empty com.adobe.idp.services.holders.FormsResultHolder object that will contain the results of this operation.

   The renderPDFForm method populates the com.adobe.idp.services.holders.FormsResultHolder object that is passed as the last argument value with a form data stream that must be written to the client web browser.

   • Create a FormResult object by getting the value of the com.adobe.idp.services.holders.FormsResultHolder object’s value data member.

   • Create a BLOB object that contains form data by invoking the FormsResult object’s getOutputContent method.

   • Get the content type of the BLOB object by invoking its getContentType method.

   • Set the javax.servlet.http.HttpServletResponse object’s content type by invoking its setContentType method and passing the content type of the BLOB object.

   • Create a javax.servlet.ServletOutputStream object used to write the form data stream to the client web browser by invoking the javax.servlet.http.HttpServletResponse object’s getOutputStream method.

   • Create a byte array and populate it by invoking the BLOB object’s getBinaryData method. This task assigns the content of the FormsResult object to the byte array.

   • Invoke the javax.servlet.http.HttpServletResponse object’s write method to send the form data stream to the client web browser. Pass the byte array to the write method.

   注意： The renderPDFForm method populates the com.adobe.idp.services.holders.FormsResultHolder object that is passed as the last argument value with a form data stream that must be written to the client web browser.