7 Appendix - Configuration Manager Command Line Interface

LiveCycle provides a Command Line Interface (CLI) for the Configuration Manager. The CLI is intended to be used by advanced users of LiveCycle, for example in server environments which do not support the use of the Graphical User Interface (GUI) of the Configuration Manager.

    7.1 Order of operations

    The Configuration Manager CLI must follow the same order of operations as the GUI version of the Configuration Manager. Ensure that you use the CLI operations in this order:

    1. Shut down the JBoss application server (Upgrade Turnkey only)

    2. Migrate the GDS directory contents. (Upgrade Turnkey only)

    3. Migrate the custom datasources. (Upgrade Turnkey only)

    4. Configure LiveCycle.

    5. Configure CRX

    6. Update LiveCycle core settings.

    7. Configure Content Services.

    8. Migrate existing turnkey database (Upgrade Turnkey only).

    9. Validate application server topology.

    10. Validate the database connectivity.

    11. Configure the application server.

    12. Validate the application server configurations.

    13. Deploy LiveCycle.

    14. Initialize LiveCycle.

    15. Validate LiveCycle.

    16. Perform critical tasks before component deployment.

    17. Deploy the LiveCycle modules.

    18. Validate the LiveCycle module deployment.

    19. Migrate Data Essential to LiveCycle

    20. Post deployment configurations.

    21. Check system readiness for PDF Generator.

    22. Add administrator user for PDF Generator.

    23. Configure Connector for IBM Content Manager.

    24. Configure Connector for IBM FileNet.

    25. Configure Connector for EMC Documentum.

    26. Configure Connector for SharePoint.

    Important: You must restart your application server after you complete Configuration Manager CLI operations.

      7.2 Command Line Interface property file

      The Configuration Manager CLI requires two property files containing the defined properties for your LiveCycle environment. The templates for the properties files, cli_propertyFile_template.txt and cli_propertyFile_upgrade_template.txt, are located in the [LiveCycle root]/configurationManager/bin folder.

      • cli_propertyFile_template.txt file that contains properties that apply to LiveCycle installation and configuration scenarios, in general.

      • cli_propertyFile_upgrade_template.txt file that contains properties specific to upgrading tasks. Both are required for upgrading from a previous version of LiveCycle.

      You must create copies of these files and edit the values. You can customize this file based on the Configuration Manager operations you intend to use. The following section describes the properties and values required.

      You should create the property file according to your installation. Use one of the following methods.

      • Create a property file and populate the values according to your installation and configuration scenarios.

      • Copy the property files cli_propertyFile_template.txt and cli_propertyFile_upgrade_template.txt to use these as a template and edit the values based on the Configuration Manager operations you intend to use.

      • Use the GUI of the Configuration Manager and then use the property file created by the GUI version as the CLI version property file. When you run the [LiveCycle root]/configurationManager/bin/ConfigurationManager.bat/sh file, the userValuesForCLI.properties file is created in the [LiveCycle root]/configurationManager/config directory. You can use this file as input for the Configuration Manager CLI.

        Note: In the CLI properties file, you must use the escape character (\) for Windows paths directory separator (\). For example, if the Fonts folder to be mentioned is C:\Windows\Fonts, in the Configuration Manager CLI script, you should enter it as C:\\Windows\\Fonts.
        Note: The following modules depend on ALC-LFS-ContentRepository. If you are using the cli_propertyFile_template.txt as template then either remove the ALC-LFS-ContentRepository from excludedSolutionComponents list or add the following LFS in excludedSolutionComponents list:

        • ALC-LFS-ProcessManagement

        • ALC-LFS-CorrespondenceManagement

        • ALC-LFS-ContentRepository

        • ALC-LFS-MobileForms

        • ALC-LFS_FormsManager

        7.3 Upgrading LiveCycle Commands

          7.3.1 (Turnkey and Partial Turnkey only) Shutdown command for JBoss for previous LiveCycle version

          Note: This command would run only if your LiveCycle ES4 Turnkey installation and your previous Turnkey installation coexist on the same machine and you have chosen to perform an upgrade installation while installing LiveCycle ES4 in Turnkey mode.

          The upgrade-shutdownPreviousJboss command shuts down the JBoss service installed with your previous LiveCycle turnkey or partial turnkey installation and sets the service run mode to 'manual'.

          This command requires no properties.

          7.3.2 (Turnkey and Partial Turnkey only) Migrate LiveCycle GDS command

          Note: This command would run only if your LiveCycle ES4 Turnkey installation and your previous Turnkey installation coexist on the same machine and you have chosen to perform an upgrade installation while installing LiveCycle ES4 in Turnkey mode.

          The upgrade-migrateGDS command migrates the Global Document Storage (GDS) directory contents from default GDS location of previous LiveCycle to the default GDS location of LiveCycle ES4.

          This command works only for turnkey or partial turnkey installations, and when the default GDS is being used. If a custom GDS is being used, the contents need to be manually migrated. This command also migrates the Connectors for ECM properties file from the LiveCycle JBoss bin directory to the new JBoss location.

          This command requires no input properties.

          7.3.3 (Turnkey and Partial Turnkey only) Migrate LiveCycle datasources command

          Note: This command would run only if your LiveCycle ES4 Turnkey installation and your previous Turnkey installation coexist on the same machine and you have chosen to perform an upgrade installation while installing LiveCycle ES4 in Turnkey mode.

          The upgrade-migrateDataSources command migrates the custom datasource definitions that might have been added to the adobe-ds.xml or <database>-ds.xml datasource files in the JBoss /server/<profile name>/deploy directory. If no custom datasources are defined, skip this command.

          The following properties are available for the upgrade-migrateDataSources command.

          Property

          Description

          Required

          Can be empty

          adobeDSDatasourcesToMigrate

          A comma separated list of the JNDI_NAME of custom datasources that need to be migrated from the LiveCycle adobe-ds.xml file

          No

          Yes

          mysqlDSDatasourcesToMigrate

          A comma separated list of the JNDI_NAME of custom datasources that need to be migrated from LiveCycle <database>-ds.xml file.

          No

          Yes
          Note: The mysqlDSDatasourcesToMigrate property refers to any LiveCycle database that you may have installed, and not just a MySQL database.

          7.3.4 Update LiveCycle core settings command

          The upgrade-configureCoreSettings command updates various core settings for LiveCycle. For example, if in your previous LiveCycle system you had the Global Document Storage (GDS) directory set at C:\LC\GDS and in LiveCycle ES4 you plan to set it to E:\DS\GDS, then the new location is not updated in the database unless this CLI command is executed. Other core settings that can be updated in the same manner are: Adobe server fonts directory, Customer fonts directory, System fonts directory, Enable FIPS, LiveCycle temp directory, LiveCycle global document storage directory.The following properties are available for the upgrade-configureCoreSettings command.

          Property

          Description

          Required

          Can be empty

          prevLCVersion

          The version of LiveCycle from which upgrade is being performed. Valid values are 9x, ADEP, or 10.0

          Yes

          No

          excludedSolutionComponents

          Comma separated list of modules not being upgraded/installed. This is equivalent to deselecting installed/licensed solution components in the Configuration Manager GUI.

          No

          Yes

          7.3.5 (Turnkey Only) Migrate existing turnkey database command

          The upgrade-migrateTurnkeyDatabase command is used to migrate data from 'adobe' schema of a previous LiveCycle Turnkey MySQL installation to 'adobe' schema of LiveCycle ES4 Turnkey MySQL installation. Before you run this command, make sure that both the MySQL services are running and are accessible. Also, both the MySQL services should be running on different ports.The following properties are available for the upgrade-migrateTurnkeyDatabase command.

          Note: This command would run only if your LiveCycle ES4 Turnkey installation and your previous Turnkey installation coexist on the same machine and you'd chosen to perform an upgrade installation while installing LiveCycle ES4 Turnkey.

          Property

          Description

          Required

          Can be empty

          lcDatabaseHostName

          Hostname for LiveCycle turnkey database.

          Yes

          No

          lcDatabaseName

          Database name for LiveCycle turnkey database. Default is adobe.

          Yes

          No

          lcDatabaseUserName

          Username for accessing LiveCycle turnkey database.

          Yes

          No

          lcDatabaseUserPassword

          Password for accessing LiveCycle turnkey database. If you don't provide a password in the file, you will prompted to provide it on command line

          No

          Yes

          lcDatabaseDriverFile

          Path to driver file for LiveCycle turnkey database.

          Yes

          No

          lcDatabasePortNumber

          Port used by LiveCycle turnkey database.

          Yes

          No

          lcDatabaseType

          Type of database configured for LiveCycle turnkey database. Default is mysql.

          Yes

          No

          lcPrevDatabaseHostName

          Hostname for previous LiveCycle turnkey database.

          Yes

          No

          lcPrevDatabaseName

          Database name for previous LiveCycle turnkey database. Default is adobe.

          Yes

          No

          lcPrevDatabaseUserName

          Username for accessing previous LiveCycle turnkey database.

          Yes

          No

          lcPrevDatabaseUserPassword

          Password for accessing previous LiveCycle turnkey database. If you don't provide a password in the file, you will prompted to provide it on command line

          No

          Yes

          lcPrevDatabaseDriverFile

          Path to driver file for previous LiveCycle turnkey database.

          Yes

          No

          lcPrevDatabasePortNumber

          The port used by previous LiveCycle turnkey database.

          Yes

          No

          lcPrevDatabaseType

          Type of database configured for previous LiveCycle turnkey database. Default is mysql.

          Yes

          No

          7.3.6 Perform critical tasks before component deployment command

          The upgrade-configurePreDeploy command is used to execute plug-ins to upgrade the components of your previous LiveCycle installation, and make them compatible with LiveCycle, before these components are actually deployed on the LiveCycle Server.The following properties are available for the upgrade-configurePreDeploy command.

          Property

          Description

          Required

          Can be empty

          prevLCVersion

          The version of LiveCycle being upgraded. Valid values are 9x, ADEP, or 10.0

          Yes

          No

          excludedSolutionComponents

          Comma separated list of components not being installed. This is equivalent to deselecting installed/licensed solution components in the Configuration Manager GUI.

          No

          Yes

          7.3.7 Post-deployment Configuration command

          The upgrade-configurePostDeploy command does the actual upgrade of the system and is run after LiveCycle EAR files and modules have been deployed.

          The following properties are available for the upgrade-configurePostDeploy command:

          Property

          Description

          Required

          Can be empty

          prevLCVersion

          The version of LiveCycle being upgraded. Valid values are 821 or 9x.

          Yes

          No

          excludedSolutionComponents

          Comma separated list of LiveCycle components not being installed. This is equivalent to deselecting installed/licensed solution components in the GUI.

          No

          Yes

          jboss.clientjar.location

          The location of the jbossall-client.jar file (JBoss only)

          Yes

          Yes

          LiveCycle Host and Authorization information

          Property

          Description

          Required

          Can be empty

          LCHost

          Hostname of the LiveCycle Server.

          Yes

          No

          LCPort

          Port number on which LiveCycle application server is configured.

          Yes

          No

          lcJndiPort

          JNDI port corresponding to LiveCycle application server.

          Yes

          No

          localServer.appServerRootDir

          This is used to access appserver client JAR files. (Local application server root directory required for WebLogic and WebSphere only)

          Yes

          Yes

          LCAdminUserID

          Username of LiveCycle administrator user

          Yes

          No

          LCAdminPassword

          Password for administrator user. If you don't provide a password in the file, you will prompted to provide it on command line

          No

          Yes

          LiveCycle Database information

          Property

          Description

          Required

          Can be empty

          lcDatabaseType

          Type of database configured for LiveCycle. Values can be mysql, db2, oracle, or sqlserver

          Yes

          No

          lcDatabaseHostName

          Hostname for the LiveCycle database.

          Yes

          No

          lcDatabasePortNumber

          The port number for the LiveCycle database.

          Yes

          No

          lcDatabaseDriverFile

          Path to driver file for the LiveCycle database.

          Yes

          No

          lcDatabaseUserName

          Username for accessing the LiveCycle database.

          Yes

          No

          lcDatabaseName

          LiveCycle database name. Default is adobe.

          Yes

          No

          lcDatabaseUserPassword

          Password for accessing database. If you don’t provide a password in the file, you will prompted to provide it on command line

          No

          Yes

          ECM Form template Migration properties

          Property

          Description

          Required

          Can be empty

          skipFormTemplatesImport

          Whether to import form templates from ECM repositories to LiveCycle native repository or skip this step. If set to false, the template files (see the next two properties) containing a list of template names to migrate should be provided.

          No

          Yes

          documentumFormTemplatesFile

          File containing a list of form templates to migrate from EMC Documentum repository to LiveCycle Native repository. This file is generated using the upgrade-getFormTemplatesToMigrate command.

          No

          Yes

          filenetFormTemplatesFile

          File containing a list of form templates to be migrated from IBM FileNet repository to LiveCycle Native repository. This file is generated using the upgrade-getFormTemplatesToMigrate command.

          No

          Yes

          7.4 General configuration properties

            7.4.1 Common properties

            Common properties are:

            WebLogic and WebSphere specific properties: Required for the Configure Application Server, Deploy LiveCycle, Validate Application Server Topology and Validate Application Server Configurations operations.

            LiveCycle Server specific properties: Required for the Initialize LiveCycle and Deploy LiveCycle Components operations.

            These properties are required for the following operations:

            • Initialize LiveCycle

            • Deploy LiveCycle components.

            Property

            Values

            Description

            targetServer.topologyType

            server or cluster

            The type of application server topology for which you are deploying LiveCycle.

            targetServer.name

            String

            The name assigned to the application server/admin server node or cluster.

            targetServer.adminHost

            String

            Default is localhost

            The hostname of the server where the application server is installed.

            targetServer.adminPort

            Integer

            The port number the admin server uses to listen for SOAP requests.

            targetServer.adminUserID

            String

            The administrative user ID to use when accessing the application server.

            localServer.appServerRootDir

            Default:

            (Windows) C:\Program Files\IBM\ WebSphere\AppServer

            (Linux, Solaris) /opt/IBM/WebSphere/AppServer

            (AIX) /usr/IBM/WebSphere/AppServer

            The root directory of the application server instance that you are configuring locally (on which you plan to deploy LiveCycle or that you will use to communicate with a remote server on which you plan to deploy LiveCycle).

            LiveCycle Server specific properties

            LCHost

            String

            The hostname of the server where LiveCycle will be deployed.

            LCPort

            Integer

            The web port number where LiveCycle will be deployed.

            excludedSolutionComponents

            String. Values include:

            ALC-LFS-Forms,

            ALC-LFS-ConnectorEMCDocumentum,

            ALC-LFS-ConnectorIBMFileNet,

            ALC-LFS-ConnectorIBMContentManager,

            ALC-LFS-DigitalSignatures,

            ALC-LFS-DataCapture,

            ALC-LFS-Output,

            ALC-LFS-PDFGenerator,

            ALC-LFS-ProcessManagement,

            ALC-LFS-ReaderExtensions,

            ALC-LFS-RightsManagement

            ALC-LFS-CorrespondenceManagement,

            ALC-LFS-ContentRepository,

            ALC-LFS-MobileForms,

            ALC-LFS_FormsManager

            (Optional) List the LiveCycle modules you do not want to configure. Specify the excluded modules in a comma separated list.

            includeCentralMigrationService

            true: to include service

            false: to exclude servcie

            The property to include or exclude Central Migration Bridge Service.

            CRX Content repository

            The following properties are specified in the cli_propertyFile_crx_template.txt file.

            		    

            contentRepository.rootDir

            		  

            Path of the CRX repository.

            7.4.2 Configure LiveCycle properties

            These properties only apply to the configure LiveCycle operation.

            Property

            Values

            Description

            AdobeFontsDir

            String

            Location of the Adobe server fonts directory.

            This path must be accessible from the server being deployed to.

            customerFontsDir

            String

            Location of the customer fonts directory.

            This path must be accessible from the server being deployed to.

            systemFontsDir

            String

            Location of the system fonts directory.

            This path must be accessible from the server being deployed to.

            LCTempDir

            String

            Location of the temporary directory.

            This path must be accessible from the server being deployed to.

            LCGlobalDocStorageDir

            String

            The global document storage root directory.

            Specify a path to an NFS shared directory used to store long-lived documents and to share them among all cluster nodes.

            This path must be accessible from the server being deployed to.

            EnableDocumentDBStorage

            true or false

            Default: false

            Enables or disables document storage in database for persistent documents.

            Even if you enable document storage in database, you will need the file system directory for GDS.

            Content Services Note: The following properties are specified in the cli_propertyFile_content_services_template.txt file.

            contentServices.rootDir

            String

            [Content Services only] Specify the root directory used by Content Services. If LiveCycle is in clustered environment, this directory must be a location shared by all nodes in a cluster with the same path across all nodes.

            contentServices.indexesDir

            String

            [Content Services only] Specify the indexes directory used by Content Services. This directory is unique for each cluster node and must have the same name and location on all nodes. For example, contentServices.indexesDir=C:\\Adobe\\Adobe LiveCycle ES4\\lccs_indexes

            contentServices.topology

            String. Specify either SERVER or CLUSTER.

            Default: SERVER

            [Content Services only] SERVER for single node, CLUSTER for a cluster configuration.

            contentServices.cifs.enable

            true or false

            Default: false

            [Content Services only] Enables or disables CIFS.

            contentServices.cifs.servername

            String

            [Content Services only] Server name of the CIFS server.

            contentServices.cifs.implementation

            String. Specify one of the following:

            • NetBIOS

            • PureJava

            [Content Services only] Specifies how Content Services connects to the CIFS server.

            contentServices.cifs.dllpath

            String.

            Specify the path from where the NetBIOS DLL will be copied.

            [Content Services only] Path where NetBios DLL will be copied. Required if "contentServices.cifs.implementation=NetBIOS". This path must be present in the environment.

            contentServices.cifs.alternateIP

            Numeric

            [Content Services only] Alternate IP Address of the CIFS Server. It should be static IP and it is required field if "contentServices.cifs.implementation=PureJava".

            contentServices.cifs.WinsOrBrdcast

            String. Specify one of the following:

            • winsServer

            • broadcast

            [Content Services only] DNS discovery method. It can be "winsServer" or "broadCast" and it is required field if "contentServices.cifs.implementation=PureJava".

            contentServices.cifs.winsPrmIP

            Numeric

            [Content Services only] Primary WINS Server IP address. It can obtained from ipconfig /all command. It is required field if "contentServices.cifs.implementation=PureJava" and "contentServices.cifs.WinsOrBrdcast=winsServer".

            contentServices.cifs.winsSecIP

            Numeric

            [Content Services only] Secondary WINS Server IP address. It can obtained from ipconfig /all command. It is required field if "contentServices.cifs.implementation=PureJava" and "contentServices.cifs.WinsOrBrdcast=winsServer".

            contentServices.cifs.brdCastIP

            Numeric

            [Content Services only] Broadcast IP address. It is required field if "contentServices.cifs.implementation=PureJava" and "contentServices.cifs.WinsOrBrdcast=broadCast".

            contentServices.dbType

            String

            [Content Services only] Content Services database type.

            contentServices.configureamps.selectedLCAMPs

            Comma separated list of strings

            [Content Services only] File names of Content Services AMPs that need to be installed.

            For example, genericservice-action.amp, lc-assemble-clipboard-items.amp

            contentServices.configureamps.externalAMPsDir

            String

            [Content Services only] Directory containing the custom AMPs that need to be installed.

            Note: All AMPs present in this directory will be installed.

            contentServices.ftp.port

            NumericDefault : 8021

            FTP Port Value for Content Services.

            contentServices.ftp.enable

            True or False

            True to enable internal email server settings and False to disable

            contentServices.email.serverDomain

            String

            Domain of the internal email server. If email settings are enabled, this is a required field.

            contentServices.email.serverPort

            NumericDefault: 25

            Email Server Port. If email settings are enabled, this is a required field.

            contentServices.internalEmailSettings.enable

            True or false

            True to enable internal email server settings and False to disable

            contentServices.propagateEventsToLC.enable

            True or false

            True to propogate events to LiveCycle and False to disable

            contentServices.usageQuota

            Numeric

            If disk quota is enabled, this is a required field.

            contentServices.email.serverAllowedSenders

            String

            These are the senders from whom emails will be accepted.

            contentServices.email.serverBlockedSenders

            String

            These are senders for whom emails will be blocked.

            contentServices.email.unknownUsers

            String

            The username to authenticate when sender address is not recognized.

            contentServices.audit.enable

            True or false

            When selected, application or user interactions with Content Services repository can be recorded.

            (WebSphere only) contentServices.myfacesDir

            String

            Directory where myfaces jars will be copied and used as shared libs

            7.4.3 Configure or validate application server properties

              7.4.3.1 Configure or Validate WebSphere properties

              The Configuration Manager can configure or validate your WebSphere application server as required by LiveCycle.

              These properties apply to the following operations:

              • Configure Application Server

              • Validate Application Server Topology

              • Validate Application Server Configurations

              • Validate Database Connectivity

              7.4.3.2 Application server properties

              Property

              Values

              Description

              You must configure the application server-specific properties section. For more information see Common properties

              		 

              jvm.initialHeapSize

              Default:

              256

              The initial heap size, in MB, for the JVM.

              jvm.maxHeapSize

              Default:

              2048

              The maximum heap size, in MB, for the JVM.

              WebLogic and WebSphere Cluster only

              cache.useUDP

              true

              Set the value to true if LiveCycle uses UDP to implement caching.

              Set to false if LiveCycle uses TCP to implement caching.

              cache.udp.port

              Default:

              33456

              The port number that the primary computer uses for UDP-based caching communication.

              Configure only if cache.useUDP=true.

              cache.tcpip.primaryhost

              String

              The host name of the computer where the primary application server is installed.

              Configure only if cache.useUDP!=true.

              cache.tcpip.primaryport

              Default:

              22345

              The port number that the primary application server computer uses for TCP-based caching communication.

              Configure only if cache.useUDP!=true.

              cache.tcpip.secondaryhost

              String

              The host name of the computer where the secondary application server is installed.

              Configure only if cache.useUDP!=true.

              cache.tcpip.secondaryport

              Default:

              22345

              The port number that the secondary application server computer uses for TCP-based caching communication.

              Configure only if cache.useUDP!=true.

              Datasource configuration

              datasource.dbType

              Choose:

              • oracle

              • db2

              • sqlserver

              The type of database configured to use with LiveCycle.

              datasource.dbName

              String

              The name of the database.

              datasource.dbHost

              String

              The host name or IP address of the server where the database is located.

              datasource.dbPort

              Integer

              The database port LiveCycle will use when communicating with the database.

              datasource.dbUser

              String

              The user ID LiveCycle will use when accessing the database.

              datasource.dbPassword

              String

              The password associated with the database user ID.

              datasource.target.driverPath

              String

              JDBC driver in the application server lib directory.

              This path must be valid and accessible from the server being configured.

              datasource.local.driverPath

              String

              Local JDBC driver. This value is used for testing direct database connection.

              7.4.4 Deploy LiveCycle properties

              These Deploy LiveCycle properties only apply to the deploy LiveCycle operation.

              Property

              Values

              Description

              For more information, see 7.4.1 Common properties

              deployment.includeIVS

              false

              Specifies whether IVS EAR files are included in the deployment.

              It is recommended not to include IVS EAR files in a production environment.

              targetServer.virtualHost

              String

              Virtual host of your WebSphere application server.

              The default values are admin_host, default_host, proxy_host.

              7.4.5 Initialize LiveCycle properties

              These initialize LiveCycle properties only apply to the initialize LiveCycle operation.

              Property

              Values

              Description

              For more information, see 7.4.1 Common properties

              7.4.6 Deploy LiveCycle Components properties

              These properties apply to the following operations:

              • Deploy LiveCycle Components

              • Validate LiveCycle Component Deployment

              • Validate LiveCycle Server.

                Property

                Values

                Description

                You must configure the LiveCycle Server Information section. For more information, see Common properties

                LCAdminUserID

                String

                The user ID to assign to the LiveCycle Administrator user. This User ID is used to login to the Administrator Console.

                LCAdminPassword

                String

                The password to assign to the LiveCycle Administrator user. This password is used to login to the Administrator Console.

              7.4.7 Add administrator user for PDF Generator

              These properties apply only to the adding administrator user for PDF Generator operation. These properties are present in cli_propertyFile_pdfg_template.txt

              Property

              Values

              Description

              LCHost

              String

              Hostname where LiveCycle Server is installed.

              LCPort

              Integer

              Port number where LiveCycle application server is configured

              LCAdminUserID

              String

              The user ID to assign to the LiveCycle Administrator user. This User ID is used to login to the Administrator Console.

              LCAdminPassword

              String

              The password to assign to the LiveCycle Administrator user. This password is used to login to the Administrator Console.

              LCServerMachineAdminUser

              String

              The user ID of the Administrator user of the Operation System hosting LiveCycle

              LCServerMachineAdminUserPasswd

              String

              The password of the Administrator user of the Operation System hosting LiveCycle

              7.4.8 Configure Connector for IBM Content Manager

              Note: The following properties are specified in the cli_propertyFile_ecm_ibmcm_template.txt file.

              Property

              Values

              Description

              LCHost

              String

              Hostname where LiveCycle Server is installed.

              LCPort

              Integer

              Port number where LiveCycle application server is configured

              LCAdminUserID

              String

              The user ID to assign to the LiveCycle Administrator user. This User ID is used to login to the Administrator Console.

              LCAdminPassword

              String

              The password to assign to the LiveCycle Administrator user. This password is used to login to the Administrator Console.

              jndiPortNumber

              String

              JNDI port corresponding to LiveCycle application server.

              jboss.clientjar.location

              String

              The location of the jbossall-client.jar file (JBoss only)

              CDVTopology.appserverrootdir

              String

              The root directory of the application server instance that you are configuring on a remote server (on which you plan to deploy LiveCycle)

              ConfigureIBMCM

              true or false

              Specify true to configure Connector for IBM Content Manager

              IBMCMClientPathDirectory

              String

              Location of IBM Content Manager client installation directory.

              DataStoreName

              String

              Name of the DataStore of IBM Content Manager Server that you want to connect to

              IBMCMUsername

              String

              The user name assign to the IBM Content Manager Administrator user. This User ID is used to login to the IBM Content Manager.

              IBMCMPassword

              String

              The password to assign to the IBM Content Manager Administrator user. This password is used to login to the IBM Content Manager.

              ConnectionString

              String

              Additional arguments used in the connection string to connect to IBM Content Manager(Optional).

              7.4.9 Configure Connector for IBM FileNet

              Note: The following properties are specified in the cli_propertyFile_ecm_filenet_template.txt file.

              Property

              Values

              Description

              LCHost

              String

              Hostname where LiveCycle Server is installed.

              LCPort

              Integer

              Port number where LiveCycle application server is configured

              LCAdminUserID

              String

              The user ID to assign to the LiveCycle Administrator user. This User ID is used to login to the Administrator Console.

              LCAdminPassword

              String

              The password to assign to the LiveCycle Administrator user. This password is used to login to the Administrator Console.

              jndiPortNumber

              String

              JNDI port corresponding to LiveCycle application server.

              jboss.clientjar.location

              String

              The location of the jbossall-client.jar file (JBoss only)

              CDVTopology.appserverrootdir

              String

              The root directory of the application server instance that you are configuring on a remote server (on which you plan to deploy LiveCycle)

              ConfigureFilenetCE

              true or false

              Specify true to configure Connector for IBM Filenet

              FilenetConfigureCEVersion

              String

              The FileNet client version to configure. Specify FilenetClientVersion4.0 or FilenetClientVersion5.0

              FilenetCEClientPathDirectory

              String

              Location of IBM Filenet Content Manager client installation directory.

              ContentEngineName

              String

              Hostname or IP address of the machine where IBM Filenet Content Engine is installed

              ContentEnginePort

              String

              The port number used by IBM Filenet Content Engine

              CredentialProtectionSchema

              CLEAR or SYMMETRIC

              Specify the level of protection.

              EncryptionFileLocation

              String

              Location of the encryption file. This is required only when you select SYMMETRIC option for CredentialProtectionSchema attribute.

              Use a forward slash (/) or double backward slashes (\\) as a path seperator.

              DefaultObjectStore

              String

              Name of the ObjectStore for the Connector for IBM Filenet Content Server.

              FilenetContentEngineUsername

              String

              The user ID to connect to the IBM FileNet Content server.

              The user ID with read-access privileges would be allowed to connect to the Default object Store.

              FilenetContentEnginePassword

              String

              The password to assigned to the IBM FileNet user. This password is used to connect to Default object Store.

              ConfigureFilenetPE

              true or false

              Specify true to configure Connector for IBM FileNet

              FilenetPEClientPathDirectory

              String

              Location of IBM FIleNet client installation directory

              FilenetProcessEngineHostname

              String

              Hostname or IP address of the process router.

              FilenetProcessEnginePortNumber

              Integer

              Port number for IBM FileNet Content Server

              FilenetPERouterURLConnectionPoint

              String

              Name of the process router.

              FilenetProcessEngineUsername

              String

              The user ID to connect to the IBM FileNet Content Server

              FilenetProcessEnginePassword

              String

              The password to connect to the IBM FileNet Content Server

              7.4.10 Configure Connector for EMC Documentum

              Note: The following properties are specified in the cli_propertyFile_ecm_documentum_template.txt file.

              Property

              Values

              Description

              LCHost

              String

              Hostname where LiveCycle Server is installed.

              LCPort

              Integer

              Port number where LiveCycle application server is configured

              LCAdminUserID

              String

              The user ID to assign to the LiveCycle Administrator user. This User ID is used to login to the Administrator Console.

              LCAdminPassword

              String

              The password to assign to the LiveCycle Administrator user. This password is used to login to the Administrator Console.

              jndiPortNumber

              String

              JNDI port corresponding to LiveCycle application server.

              jboss.clientjar.location

              String

              The location of the jbossall-client.jar file (JBoss only)

              CDVTopology.appserverrootdir

              String

              The root directory of the application server instance that you are configuring on a remote server (on which you plan to deploy LiveCycle)

              ConfigureDocumentum

              true or false

              Specify true to configure Connector for EMC Documentum

              DocumentumClientVersion

              String

              The EMC Documentum client version to configure. Specify DocumentumClientVersion6.0 or DocumentumClientVersion6.5

              DocumentumClientPathDirectory

              String

              Location of EMC Documentum client installation directory

              ConnectionBrokerHostName

              String

              Hostname or IP address of the EMC Documentum Content Server.

              ConnectionBrokerPortNumber

              String

              Port number for EMC Documentum Content Server

              DocumentumUsername

              String

              The user ID to connect to the EMC Documentum Content Server.

              DocumentumPassword

              String

              The password ID to connect to the EMC Documentum Content Server.

              DocumentumDefaultRepositoryName

              String

              Name of the default repository of MC Documentum Content Server

              7.4.11 Configure Connector for Microsoft SharePoint

              Note: The following properties are specified in the cli_propertyFile_ecm_sharepoint_template.txt file.

              Property

              Values

              Description

              LCHost

              String

              Hostname where LiveCycle Server is installed.

              LCPort

              Integer

              Port number where LiveCycle application server is configured

              LCAdminUserID

              String

              The user ID to assign to the LiveCycle Administrator user. This User ID is used to login to the Administrator Console.

              LCAdminPassword

              String

              The password to assign to the LiveCycle Administrator user. This password is used to login to the Administrator Console.

              jndiPortNumber

              String

              JNDI port corresponding to LiveCycle application server.

              jboss.clientjar.location

              String

              The location of the jbossall-client.jar file (JBoss only)

              CDVTopology.appserverrootdir

              String

              The root directory of the application server instance that you are configuring on a remote server (on which you plan to deploy LiveCycle)

              ConfigureSharePoint

              true or false

              Specify true to configure Connector for Microsoft SharePoint

              SharePointServerAddress

              String

              Hostname or IP address of the Sharepoint Server

              SharePointUsername

              String

              The user ID to connect to the Sharepoint Server

              SharePointPassword

              String

              The password to connect to the Sharepoint Server

              SharePointDomain

              String

              The Domain Name of the Sharepoint Server

              ConnectionString

              String

              Additional arguments used in the connection string to connect to the Sharepoint Server(optional

              7.4.12 Command Line Interface Usage

              Once you have configured your property file, you must navigate to the [LiveCycle root]/configurationManager/bin folder.

              To view a complete description of the Configuration Manager CLI commands, type: ConfigurationManagerCLI help <command name>.

              7.4.12.1 Configure LiveCycle CLI Usage

              The Configure LiveCycle operation requires the following syntax:

              configureLiveCycle -f <propertyFile>

              Where:

              • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

              7.4.12.2 Configure CRX CLI Usage

              The Configure CRX Repository requires the following syntax:

              configureCRXRepository -f <propertyFile>

              Where:

              • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

              7.4.12.3 Configure Content Services (deprecated) CLI Usage

              The Configure Content Services operation requires the following syntax:

              configureContentServices -f <propertyFile>

              where:

              • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

                Note: The Content Services is deprecated and does not appear in the list of selected components. To include Content Services in the list of selected components remove or comment out excludedSolutionComponents=ALC-LFS-ContentServices property from cli_propertyFile_template.txt file.

              7.4.12.4 Validate Application Server Topology CLI Usage

              The Validate Application Server Topology operation is optional and requires the following syntax:

              validateApplicationServerTopology -f <propertyFile> -targetServer_AdminPassword <password>

              Where:

              • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

              • -targetServer_AdminPassword <password>: Allows you to set the Admin password on the command line. If this argument is present, it will override the targetServer.adminPassword property in the property file.

              7.4.12.5 Validate database connectivity CLI Usage

              The validate Database Connectivity operation is optional and requires the following syntax:

              validateDBConnectivity -f <propertyFile> -datasource_dbPasssword <password>

              Where:

              • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

              • -datasource_dbPassword <password>: Allows you to set the database user password on the command line. If this argument is present, it will override the datasource.dbPassword property in the property file.

              7.4.12.6 Configure the Application Server CLI Usage

              The Configure Application Server operation requires the following syntax:

              configureApplicationServer -targetServer_AdminPassword <password> -f <propertyFile> [-skip <configurationsToSkipList>]

              Where:

              • -targetServer_AdminPassword <password>: Allows you to set the Administrator password on the command line. If this argument is present, it will override the targetServer_AdminPassword property in the property file.

              • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

              • -skip <configurationsToSkipList>: This is an optional parameter which allows you to list the application server components you do not want to configure. Specify the excluded components in a comma separated list. Valid options are Datasource or Core.

              7.4.12.7 Validate Application Server Configurations CLI Usage

              The Validate Application Server Configurations operation is optional and requires the following syntax:

              validateApplicationServerConfigurations -f <propertyFile> -targetServer_AdminPassword <password>

              Where:

              • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

              • -targetServer_AdminPassword <password>: Allows you to set the Admin password on the command line. If this argument is present, it will override the targetServer.adminPassword property in the property file.

              7.4.12.8 (WebSphere and Weblogic Only) Deploy LiveCycle CLI Usage

              The Deploy LiveCycle operation requires the following syntax:

              deployLiveCycle -f <propertyFile>

              Where:

              • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.
                Important: You must restart your application server after you complete Deploy LiveCycle operation.

              7.4.12.9 Initialize LiveCycle CLI Usage

              The initialize LiveCycle operation requires the following syntax:

              initializeLiveCycle -f <propertyFile>

              Where:

              • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

              7.4.12.10 Validate LiveCycle Server CLI Usage

              The Validate LiveCycle Server operation is optional and requires the following syntax:

              validateLiveCycleServer -f <propertyFile> -LCAdminPassword <password>

              Where:

              • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

              • -LCAdminPassword <password>: Allows you to set the Admin password on the command line. If this argument is present, it will override the targetServer.adminPassword property in the property file.

              7.4.12.11 Deploy LiveCycle Components CLI Usage

              The Deploy LiveCycle Components operation requires the following syntax:

              deployLiveCycleComponents -f <propertyFile> -LCAdminPassword <password>

              Where:

              • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

              • -LCAdminPassword <password>: Allows you to set the Admin password on the command line. If this argument is present, it will override the targetServer.adminPassword property in the property file.

              7.4.12.12 Validate LiveCycle Component Deployment CLI Usage

              The Validate LiveCycle Component Deployment operation is optional and requires the following syntax:

              validateLiveCycleComponentDeployment -f <propertyFile> -LCAdminPassword <password>

              Where:

              • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

              • -LCAdminPassword <password>: Allows you to set the Admin password on the command line. If this argument is present, it will override the targetServer.adminPassword property in the property file.

              7.4.12.13 Check system readiness for PDF Generator

              The Checking system readiness for PDF Generator operation requires the following syntax:

              pdfg-checkSystemReadiness

              7.4.12.14 Adding administrator user for PDF Generator

              The adding administrator user for PDF Generator operation requires the following syntax:

              pdfg-addAdminUser -f <propertyFile>

              Where:

              • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

              7.4.12.15 Configure Connector for IBM Content Manager

              The Configure Connector for IBM Content Manager operation is optional and requires the following syntax:

              IBMCM-configurationCLI -f <propertyFile>

              Where:

              • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

                Important: Modify the <propertyFile> called cli_propertyFile_ecm_ibmcm_template.txt located in the [LiveCycle root]\configurationManager\bin\ directory.

              Perform the following steps manually to complete the configuration for Connector for IBM Content Manager.

              1. Copy the adobe-component-ext.properties file from [LiveCycle root]/configurationManager/configure-ecm/websphere to the following [appserver root]/profiles/[profile_name] directory.

              2. Restart the Application Server.

              3. Start the following services from LiveCycle Administration Console

                • IBMCMAuthProviderService

                • IBMCMConnectorService

              7.4.12.16 Configure Connector for IBM FileNet

              The Configure Connector for IBM FileNet operation is optional and requires the following syntax:

              filenet-configurationCLI -f <propertyFile>

              Where:

              • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

                Important: Modify the <propertyFile> called cli_propertyFile_ecm_filenet_template.txt located in the [LiveCycle root]\configurationManager\bin\ directory.

              Perform the following steps manually to complete the configuration for Connector for IBM Content Manager.

              1. Copy the adobe-component-ext.properties file from [LiveCycle root]/configurationManager/configure-ecm/websphere to the following [appserver root]/profiles/[profile_name] directory.

              2. Locate the wsjass.conf file in the [appserver root]/profiles/[profile name]/properties directory and add to it contents of wsjass.conf file available in [LiveCycle root]/configurationManager/configure-ecm/websphere directory.

              3. (Only for FileNet 4.x) Add the Java option -Dwasp.location=[FileNetClient root]/wsi to the Application Server startup options.

              4. Restart the Application Server.

              5. Start the following services from LiveCycle Administration Console

                • IBMFileNetAuthProviderService

                • IBMFileNetContentRepositoryConnector

                • IBMFileNetRepositoryProvider

                • IBMFileNetProcessEngineConnector(If configured)

              7.4.12.17 Configure Connector for EMC Documentum

              The Configure Connector for EMC Documentum operation is optional and requires the following syntax:

              documentum-configurationCLI -f <propertyFile>

              Where:

              • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

                Important: Modify the <propertyFile> called cli_propertyFile_ecm_documentum_template.txt located in the [LiveCycle root]\configurationManager\bin\ directory.

              Perform the following steps manually to complete the configuration for Connector for EMC Documentum.

              1. Copy the adobe-component-ext.properties file from [LiveCycle root]/configurationManager/configure-ecm/websphere to the following [appserver root]/profiles/[profile_name] directory.

              2. Restart the Application Server.

              3. Start the following services from LiveCycle Administration Console

                • EMCDocumentumAuthProviderService

                • EMCDocumentumRepositoryProvider

                • EMCDocumentumContentRepositoryConnector

              7.4.12.18 Configure Connector for Microsoft SharePoint

              The Configure Connector for Microsoft SharePoint operation is optional and requires the following syntax:

              sharepoint-configurationCLI -f <propertyFile>

              Where:

              • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

                Important: Modify the <propertyFile> called cli_propertyFile_ecm_sharepoint_template.txt located in the [LiveCycle root]\configurationManager\bin\ directory.

              7.5 Examples Usage

              From the C:\Adobe\Adobe LiveCycle ES4\configurationManager\bin, type: 

              ConfigurationManagerCLI configureLiveCycle -f cli_propertyFile.txt

              Where cli_propertyFile.txt is the name of the property file you created.

                7.6 Configuration Manager CLI Logs

                If an error occurs, you can review the CLI logs located here in the [LiveCycle root]\configurationManager\log folder. The log file generated will have a naming convention such as lcmCLI.0.log where the number in the filename (0) will increment when the log files are rolled over.

                  7.7 Next steps

                  If you used Configuration Manager CLI to configure and deploy LiveCycle, you can now do the following tasks:

                    // Ethnio survey code removed