|
Note: Press F1 in Configuration Manager to view Help
information for the screen you are viewing. You can view the configuration
progress at any time by clicking View Progress Log.
Note: During configuration, if you must reset the data in Configuration
Manager by using the Reset to Default option, ensure that you relaunch
the Configuration Manager. Otherwise, you may encounter some missing
configuration screens.
If you are continuing from the LiveCycle installation,
proceed to step 3; otherwise, navigate to the [LiveCycle root]\configurationManager\bin
folder and run the ConfigurationManager.bat script.
When prompted, select the language to use, and then click OK.
On the Welcome to Adobe LiveCycle ES4 screen, click Next.
On the Upgrade Task Selection screen, ensure that Upgrade from LiveCycle ES2 and ES2.5, Upgrade from ADEP and Upgrade from LiveCycle ES3 are deselected.
If you are performing a LiveCycle upgrade, review the LiveCycle turnkey upgrade guide. Click Next.
On the Turnkey Mode screen, select Express Mode (recommended
for quick deployments) and click Next to proceed to the next
section.
4.4.1.1 Select modules and Configure CRXOn the Modules screen, ensure that the Adobe LiveCycle
modules that you have licensed and want to deploy are selected,
and then click Next.
LiveCycle Foundation is included
in the configuration and deployment when you choose any of the module
lists.
Note: Some modules have technical dependencies
on other modules for proper configuration and functioning. Configuration
Manager displays a dialog and does not allow to proceed further
if mutually dependent modules are not selected. For example, you
must select Adobe LiveCycle Forms, Adobe LiveCycle Output, and Content
Repository modules if you are configuring Correspondence Management Solution.
Note: You do not need to deploy all of your licensed
modules at the same time. You can rerun Configuration Manager later
to deploy more modules.
On the Configure Turnkey JBoss SSL screen, add the information
to configure the SSL certificate and click Configure JBoss SSL,
when complete click Next.
You can skip this step by
selecting the Skip Configuration and configure it later in LiveCycle
Configuration Manager.
Certificate Alias: The
alternate unique name that is used to reference the certificate
(for example, LiveCycleCert).
Keystore filename: The name of the keystore that is
assigned to store the keys and the certificate (for example, lces).
In the CRX Configuration screen, specify the path
to the CRX repository click Configure to create the required
repository files at the specified location. Default location for
content repository is [Livecycle root]/crx-repository.
It
configures the repository to bundle within the LiveCycle Core EAR
file.
Click Next to continue.
 A
backup (adobe-jboss-core-ear.orig) for the original LiveCycle Core
EAR file is taken in the [LiveCycle root]\deploy folder. You can
restore the EAR file in case you want to run the set up again without
the CRX repository. Note: Once the packages are configured,
you cannot remove them by re-running the Configuration Manager.
For clean uninstallation of deployed packages, you need to uninstall
and delete the packages using Package Manager.
4.4.1.2 Install verification samples ( Adobe® LiveCycle® Forms Standard 11, Adobe® LiveCycle® Mobile Forms 11, Adobe® LiveCycle® Output 11, and PDF Generator only)
On the LiveCycle ES4 Installation Verification Sample (IVS) EAR
files screen, you can install three service-specific sample applications.
Select Include IVS EARs in deployment set and click Next to
install these sample files. adobe-output-ivs-jboss.ear, adobe-mobileforms-ivs.ear, and adobe-forms-ivs-jboss.ear appear
only if you have selected respective modules on the Modules screen.
Note: Do not deploy the IVS EAR files to a production
environment.
4.4.1.3 Turnkey Express Mode and CRX Configuration Summary On the Express Mode screen, Click Start to
start the configuration and deployment of LiveCycle and when complete,
click Next.
4.4.1.4 Connector for EMC Documentum On the Specify Client for EMC Documentum
screen, do one of the following tasks: Leave the option
selected, enter the appropriate version and directory path, and
then click Verify. When complete, click Next and complete
the tasks on the following screens:
On the Specify
EMC Documentum Content Server Settings screen, enter the required
values and then click Next.
On the Configure Adobe Connector for EMC Documentum screen,
click Configure Documentum Connector. When complete, click Next.
Deselect the Configure Connector for EMC Documentum Content Server option
to manually configure EMC Documentum later, and then click Next.
4.4.1.5 Connector for IBM Content Manager On the Specify Client for IBM Content Manager screen,
do one of the following tasks: Leave the option selected,
enter the appropriate directory path, and then click Verify. When
complete, click Next and complete the tasks on the following
screens:
On the Specify IBM Content Manager Server
Settings screen, enter the required values and then click Next.
On the Configure Adobe Connector for IBM Content Manager
screen, click Configure IBM Content Manager Connector. When
complete, click Next.
Deselect the Configure Connector for IBM Content Manager option
to manually configure IBM Content Manager later, and then click Next.
4.4.1.6 Connector for IBM FileNet On the Specify Client for IBM FileNet screen,
do one of the following tasks: Leave the option selected,
enter the appropriate version and directory path, and then click Verify.
When complete, click Next and complete the following screens:
On the Specify IBM FileNet Content Server Settings screen,
enter the required values and then click Next.
On the Configure Connector for IBM FileNet Process Engine
screen, enter the appropriate version (if enabled) and directory
path, and then click Verify. When complete, click Next.
On the IBM FileNet Process Engine Server Settings screen,
enter the required values and then click Next.
On the Configure Adobe Connector for IBM FileNet screen,
click Configure FileNet Connector. When complete, click Next.
Deselect the Configure Connector for IBM FileNet Content Manager option
to manually configure IBM FileNet later, and then click Next.
4.4.1.7 Connector for Microsoft SharePointOn the Configure Connector for Microsoft SharePoint screen,
do one of the following tasks: Leave the Configure Connector for Microsoft SharePoint option
selected. Enter the required values, and then click Configure SharePoint
Connector. When complete, click Next to manually configure
Microsoft SharePoint later, and then click Next.
Deselect the Configure Connector for Microsoft SharePoint option
to manually configure Microsoft Sharepoint later, and then click Next.
4.4.1.8 Verify Configuration for ECM ConnectorsOn the Verify Configurations screen, do one of the following If you are configuring the connectors for the first time
or have modified any of the configurations on the previous screens,
leave the Restart Application Server option selected and
click Validate Configurations. When successfully validated,
click Next.
If you wish to configure the connectors later, deselect the Restart Application Server option
and click Validate Configurations. When successfully validated,
click Next.
4.4.1.9 PDF Generator configurationIn the Administrator user credentials for native PDF conversions screen box,
enter the user name and password of a user with administrative privileges on
the server machine. Click Add user.
Add at least one
administrative user for Windows 2008 Server and Click Next.
Note: On Windows 2008 Server, disable User Account Control
(UAC) for the users you add. To disable UAC, click Control Panel > User Accounts > Turn User Account Control on or off and
deselect Use User Account Control (UAC) to help protect your computer.
Click OK. Your changes become effective when the system is restarted.
In the LiveCycle PDFGenerator System Readiness Test screen
box, click Start to validate if the system has been appropriately
configured for PDF Generator. Review the System Readiness Tool Report
and click Next.
4.4.1.10 Configure Reader Extensions Credential In the Reader Extensions Credential Configuration screen
box, choose one of these options: Browse and select
a Reader Extensions credential file. Enter the Credential Password
and name for the credential. click Configure, when complete Click Next.
Skip this step by selecting Configure Later Using LiveCycle ES4 Administration Console and
click Next. You can configure the Rights credential from
Administration Console (Settings > Trust Store Management > Local Credentials).
4.4.1.11 Task summaryReview the Configuration Manager task summary list and
select Launch Next Steps to launch an html page containing
information about LiveCycle user and administrative interfaces.
Click Finish.
|
|
|
