|
Note: Press F1 in Configuration Manager to view Help
information for the screen you are viewing. You can view the configuration
progress at any time by clicking View Progress Log.
Note: During configuration, if you must reset the data in Configuration
Manager by using the Reset to Default option, ensure that you relaunch
the Configuration Manager. Otherwise, you may encounter some missing
configuration screens.
If you are continuing from the LiveCycle installation,
proceed to step 3; otherwise, navigate to the [LiveCycle root]\configurationManager\bin
folder and run the ConfigurationManager.bat script.
When prompted, select the language to use, and then click OK.
On the Welcome to Adobe LiveCycle ES4 screen, click Next.
On the Upgrade Task Selection screen, ensure that Upgrade from LiveCycle ES Update 1,
and Upgrade from LiveCycle ES2 or LiveCycle ES2.5 are deselected.
If you are performing a LiveCycle ES4 upgrade, review the appropriate
LiveCycle turnkey upgrade guide.
On the Correspondence Management Solution Selection screen,
Correspondence Management Solution option is selected by default.
With this option selected, you will be presented with the configuration
screens to configure Correspondence Management Solution.
Click
Next to continue.
5.5.1.1 Configuring data source and Application ServerOn Flexible Turnkey Installation screen, do one
of the following tasks Leave the Skip dataSource configuration option
deselected to configure the data source, and then click Next.
Select the Skip dataSource configuration option if
you have already configured the data source, and click Next.
This
screen will appear only if you have already configured the datasource.
On the Datasource configuration screen, enter the appropriate
information to configure the database connection string and click Test Database Connection to
ensure that the connection is configured properly. Note: If the database
server is not running or is not set up yet, you can still configure
the data source; however, the Test Database Connection will result
in a failure message.
On the Application Server configuration screen, click Configure,
and then click Next.
Important: If you are using the SQL Server database,
ensure that you turn on the Windows Authentication Mode for SQL
Server after configuring application server on this screen. For
detailed steps, see 5.4.3.2 Integrated security.
5.5.1.2 Select Configuration Mode and Correspondence Management SolutionOn
the Turnkey Mode screen, select Express Mode (recommended
for quick deployments) and click Next to proceed to the next
section.
On the Correspondence Management Solution Selection screen,
select the Correspondence Management Solution and then click Next.
This screen appears only if have already installed the Correspondence
Management Solution.
5.5.1.3 Select modulesOn the Modules screen, ensure that the Adobe LiveCycle
modules that you have licensed and want to deploy are selected,
and then click Next.
Note: You do not need
to deploy all of your licensed modules at the same time. You can
rerun Configuration Manager later to deploy more modules.
On the Configure Turnkey JBoss SSL screen, add the information
to configure the SSL certificate and click Configure JBoss SSL,
when complete click Next.
You can skip this step and
configure it later in the LiveCycle Configuration Manager.
Certificate Alias: The alternate unique name that
is used to reference the certificate (for example, LiveCycleCert).
Keystore filename: The name of the keystore that is
assigned to store the keys and the certificate (for example, lces).
In the CRX Configuration screen, specify the path
to the CRX repository click Configure to create the required
repository files at the specified location. Default location for
content repository is [Livecycle root]/crx-repository.
It
configures the repository to bundle within the LiveCycle Core EAR
file.
Click Next to continue.
 A
backup (adobe-jboss-core-ear.orig) for the original LiveCycle Core
EAR file is taken in the [LiveCycle root]\deploy folder. You can
restore the EAR file in case you want to run the set up again without
the CRX repository. Note: Once the packages are configured,
you cannot remove them by re-running the Configuration Manager.
For clean uninstallation of deployed packages, you need to uninstall
and delete the packages using Package Manager.
5.5.1.4 Install verification samples ( Adobe® LiveCycle® Forms Standard 11, Adobe® LiveCycle® Mobile Forms 11, Adobe® LiveCycle® Output 11, and PDF Generator only)
On the LiveCycle ES4 Installation Verification Sample (IVS) EAR
files screen, you can install three service-specific sample applications.
Select Include IVS EARs in deployment set and click Next to
install these sample files. adobe-output-ivs-jboss.ear, adobe-mobileforms-ivs.ear, and adobe-forms-ivs-jboss.ear appear
only if you have selected respective modules on the Modules screen.
Note: Do not deploy the IVS EAR files to a production
environment.
5.5.1.5 Configure Connector for EMC Documentum On the Specify Client for EMC Documentum
screen, do one of the following tasks: Deselect the Configure Connector for EMC Documentum Content Server option
to manually configure EMC Documentum later, and then click Next.
Leave the option selected, enter the appropriate version
and directory path, and then click Verify. When complete,
click Next and complete the tasks on the following screens:
On the EMC Documentum Content Server Settings screen, enter
the required values and then click Next.
On the Configure Connector for EMC Documentum screen, click Configure Documentum Connector.
When complete, click Next.
5.5.1.6 Configure Connector for IBM Content Manager On the Specify Client for IBM Content Manager screen,
do one of the following tasks: Deselect the Configure Connector for IBM Content Manager option
to manually configure IBM Content Manager later, and then click Next.
Leave the option selected, enter the appropriate directory
path, and then click Verify. When complete, click Next and
complete the tasks on the following screens:
On the
IBM Content Manager Server Settings screen, enter the required values
and then click Next.
On the Configure Connector for IBM Content Manager screen,
click Configure IBM Content Manager Connector. When complete,
click Next.
5.5.1.7 Configure Connector for IBM FileNet On the Specify Client for IBM FileNet screen,
do one of the following tasks: Deselect the Configure Connector for IBM FileNet Content Manager option
to manually configure IBM FileNet later, and then click Next.
Leave the option selected, enter the appropriate version
and directory path, and then click Verify. When complete,
click Next and complete the following screens:
On the IBM FileNet Content Server Settings screen, enter
the required values and then click Next.
On the Configure Connector for IBM FileNet Process Engine
screen, enter the appropriate version (if enabled) and directory
path, and then click Verify. When complete, click Next.
On the IBM FileNet Process Engine Server Settings screen,
enter the required values and then click Next.
On the Configure Connector for IBM FileNet screen, click Configure FileNet Connector. When
complete, click Next.
5.5.1.8 Configure Connector for Microsoft SharePointOn the Configure Connector for Microsoft SharePoint screen,
do one of the following tasks: Deselect the Configure Connector for Microsoft SharePoint option
to manually configure Microsoft Sharepoint later, and then click Next.
Leave the Configure Connector for Microsoft SharePoint option
selected. Enter the required values, and then click Configure SharePoint
Connector. When complete, click Next.
5.5.1.9 Verify Configuration for ECM ConnectorsOn the Verify Configurations screen, do one of the following If you are configuring the connectors for the first time
or have modified any of the configurations on the previous screens,
leave the Restart Application Server option selected and
click Validate Configurations. When successfully validated,
click Next.
If you wish to configure connectors later, deselect the Restart Application Server option
and click Validate Configurations. When successfully validated,
click Next.
5.5.1.10 PDF Generator configurationIn the Administrator user credentials for native PDF conversions screen, enter
the user name and password of a user with administrative privileges
on the server machine. Click Add user.
Add at least
one administrative user for Windows 2008 Server and Click Next.
Note: On Windows 2008 Server, disable User Account Control
(UAC) for the users you add. To disable UAC, click Control Panel > User Accounts > Turn User Account Control on or off and
deselect Use User Account Control (UAC) to help protect your computer.
Click OK. Your changes become effective when the system is restarted.
In the LiveCycle PDFGenerator System Readiness Test screen,
click Start to validate if the system has been appropriately
configured for PDF Generator.
Review the System Readiness Tool Report and click Next.
5.5.1.11 Configure Reader Extensions Credentials In the Reader Extensions Credential Configuration screen,
choose one of these options: Browse and select a Reader
Extensions credential file. Enter the Credential Password and name
for the credential. Click Next.
Skip this step by selecting Configure Later Using LiveCycle ES4 Administration Console and
click Next. You can configure the Rights credential from
Administration Console (Settings > Trust Store Management > Local Credentials).
5.5.1.12 Task summaryReview the Configuration Manager task summary list
and select Launch Next Steps to launch an html page containing
step-by-step instructions to start and use LiveCycle.
After you finish configuring LiveCycle, complete the post-deployment
activities that apply to your solution implementation. (See 6 Post-Deployment Activities)
If you reconfigured SSL or you are running Configuration
Manager on a server where you have already configured LiveCycle
you must restart JBoss for the SSL configuration to take effect.
|
|
|
