8 Appendix - Configuration Manager Command Line Interface

LiveCycle provides a Command Line Interface (CLI) for the Configuration Manager. The CLI is intended to be used by advanced users of LiveCycle, for example in server environments which do not support the use of the Graphical User Interface (GUI) of the Configuration Manager.

8.1 Order of operations

The Configuration Manager CLI must follow the same order of operations as the GUI version of the Configuration Manager. Ensure that you use the CLI operations in this order:

  1. Configure LiveCycle.

  2. Validate application server topology.

  3. Validate the database connectivity.

  4. Configure the application server.

  5. Validate the application server configurations.

  6. Deploy LiveCycle.

  7. Initialize LiveCycle.

  8. Validate LiveCycle.

  9. Deploy the LiveCycle modules.

  10. Validate the LiveCycle module deployment.

  11. Check system readiness for PDF Generator.

  12. Add administrator user for PDF Generator.

  13. Configure Connector for IBM Content Manager.

  14. Configure Connector for IBM FileNet.

  15. Configure Connector for EMC Documentum.

  16. Configure Connector for SharePoint.

  17. Configure Correspondance Mangement.

8.2 Command Line Interface property file

The Configuration Manager CLI requires a property file containing the defined properties for your LiveCycle environment. The template for the properties file, cli_propertyFile_template.txt, is located in the [LiveCycle root]/configurationManager/bin folder. You must create a copy of this file and edit the values. You can customize this file based on the Configuration Manager operations you intend to use. The following section describes the properties and values required.

You should create the property file according to your installation. Use one of the following methods.

  • Create a property file and populate the values according to your installation and configuration scenarios.

  • Copy the property file cli_propertyFile_template.txt to use them as cli_propertyFileupgrade_template.txt template and edit the values based on the Configuration Manager operations you intend to use.

  • Use the GUI of the Configuration Manager and then use the property file created by the GUI version as the CLI version property file. When you run the [LiveCycle root]/configurationManager/bin/ConfigurationManager.bat file, the userValuesForCLI.properties file is created in the [LiveCycle root]/configurationManager/config directory. You can use this file as input for the Configuration Manager CLI.

    Note: In the CLI properties file, you must use the escape character (\) for Windows paths directory separator (\). For example, if the Fonts folder to be mentioned is C:\Windows\Fonts, in the Configuration Manager CLI script, you should enter it as C:\\Windows\\Fonts.

8.3 General configuration properties

8.3.1 Common properties

Common properties are:

WebLogic and WebSphere specific properties: Required for the Configure the Application Server, Deploy LiveCycle, Validate Application Server Topology and Validate Application Server Configurations operations.

LiveCycle Server specific properties: Required for the Initialize LiveCycle and Deploy LiveCycle Components operations.

These properties are required for the following operations:

  • Initialize LiveCycle

  • Deploy LiveCycle components.

Property

Values

Description

targetServer.topologyType

server or cluster

The type of application server topology for which you are deploying LiveCycle.

targetServer.name

String

The name assigned to the application server/admin server node or cluster.

targetServer.adminHost

String

Default is localhost

The hostname of the server where the application server is installed.

targetServer.adminPort

Integer

The port number the admin server uses to listen for SOAP requests.

targetServer.adminUserID

String

The administrative user ID to use when accessing the application server.

localServer.appServerRootDir

Default:

(Windows) C:\Program Files\IBM\ WebSphere\AppServer

(Linux, Solaris) /opt/IBM/WebSphere/AppServer

(AIX) /usr/IBM/WebSphere/AppServer

The root directory of the application server instance that you are configuring locally (on which you plan to deploy LiveCycle or that you will use to communicate with a remote server on which you plan to deploy LiveCycle).

LiveCycle Server specific properties

LCHost

String

The hostname of the server where LiveCycle will be deployed.

LCPort

Integer

The web port number where LiveCycle will be deployed.

excludedSolutionComponents

String. Values include:

ALC-LFS-Forms,

ALC-LFS-ConnectorEMCDocumentum,

ALC-LFS-ConnectorIBMFileNet,

ALC-LFS-ConnectorIBMContentManager,

ALC-LFS-DigitalSignatures,

ALC-LFS-DataCapture,

ALC-LFS-Output,

ALC-LFS-PDFGenerator,

ALC-LFS-ProcessManagement,

ALC-LFS-ReaderExtensions,

ALC-LFS-RightsManagement

(Optional) List the LiveCycle modules you do not want to configure. Specify the excluded modules in a comma separated list.

excludedSolution

ALC-SA-CorrespondenceManagement

You can include or exclude Correspondence Management Solution by specifying this property.

8.3.2 Configure LiveCycle properties

These properties only apply to the configure LiveCycle operation.

Property

Values

Description

AdobeFontsDir

String

Location of the Adobe server fonts directory.

This path must be accessible from the server being deployed to.

customerFontsDir

String

Location of the customer fonts directory.

This path must be accessible from the server being deployed to.

systemFontsDir

String

Location of the system fonts directory.

This path must be accessible from the server being deployed to.

LCTempDir

String

Location of the temporary directory.

This path must be accessible from the server being deployed to.

LCGlobalDocStorageDir

String

The global document storage root directory.

Specify a path to an NFS shared directory used to store long-lived documents and to share them among all cluster nodes.

Specify this property only when deploying LiveCycle components in a clustered environment.

This path must be accessible from the server being deployed to.

EnableDocumentDBStorage

true or false

Default: false

Enables or disables document storage in database for persistent documents.

Even if you enable document storage in database, you will need the file system directory for GDS.

(WebSphere only) contentServices.myfacesDir

String

Directory where myfaces jars will be copied and used as shared libs

8.3.3 Configure or validate application server properties

8.3.3.1 Configure or Validate WebSphere properties

The Configuration Manager can configure or validate your WebSphere application server as required by LiveCycle.

These properties apply to the following operations:

  • Configure Application Server

  • Validate Application Server Topology

  • Validate Application Server Configurations

  • Validate Database Connectivity

8.3.3.2 Application server properties

Property

Values

Description

You must configure the application server-specific properties section. For more information see Common properties

 

jvm.initialHeapSize

Default:

256

The initial heap size, in MB, for the JVM.

jvm.maxHeapSize

Default:

1792

The maximum heap size, in MB, for the JVM.

WebLogic and WebSphere Cluster only

cache.useUDP

true

Set the value to true if LiveCycle uses UDP to implement caching.

Set to false if LiveCycle uses TCP to implement caching.

cache.udp.port

Default:

33456

The port number that the primary computer uses for UDP-based caching communication.

Configure only if cache.useUDP=true.

cache.tcpip.primaryhost

String

The host name of the computer where the primary application server is installed.

Configure only if cache.useUDP!=true.

cache.tcpip.primaryport

Default:

22345

The port number that the primary application server computer uses for TCP-based caching communication.

Configure only if cache.useUDP!=true.

cache.tcpip.secondaryhost

String

The host name of the computer where the secondary application server is installed.

Configure only if cache.useUDP!=true.

cache.tcpip.secondaryport

Default:

22345

The port number that the secondary application server computer uses for TCP-based caching communication.

Configure only if cache.useUDP!=true.

Datasource configuration

datasource.dbType

Choose:

  • oracle

  • db2

  • sqlserver

The type of database configured to use with LiveCycle.

datasource.dbName

String

The name of the database.

datasource.dbHost

String

The host name or IP address of the server where the database is located.

datasource.dbPort

Integer

The database port LiveCycle will use when communicating with the database.

datasource.dbUser

String

The user ID LiveCycle will use when accessing the database.

datasource.dbPassword

String

The password associated with the database user ID.

datasource.target.driverPath

String

JDBC driver in the application server lib directory.

This path must be valid and accessible from the server being configured.

datasource.local.driverPath

String

Local JDBC driver. This value is used for testing direct database connection.

8.3.4 Deploy LiveCycle properties

These Deploy LiveCycle properties only apply to the deploy LiveCycle operation.

Property

Values

Description

For more information, see 8.3.1 Common properties

deployment.includeIVS

false

Specifies whether IVS EAR files are included in the deployment.

It is recommended not to include IVS EAR files in a production environment.

targetServer.virtualHost

String

Virtual host of your WebSphere application server.

The default values are admin_host, default_host, proxy_host.

8.3.5 Initialize LiveCycle properties

These initialize LiveCycle properties only apply to the initialize LiveCycle operation.

Property

Values

Description

For more information, see 8.3.1 Common properties

8.3.6 Deploy LiveCycle Components properties

These properties apply to the following operations:

  • Deploy LiveCycle Components

  • Validate LiveCycle Component Deployment

  • Validate LiveCycle Server.

    Property

    Values

    Description

    You must configure the LiveCycle Server Information section. For more information, see Common properties

    LCAdminUserID

    String

    The user ID to assign to the LiveCycle Administrator user. This User ID is used to login to the Administrator Console.

    LCAdminPassword

    String

    The password to assign to the LiveCycle Administrator user. This password is used to login to the Administrator Console.

8.3.7 Add administrator user for PDF Generator

These properties apply only to the adding administrator user for PDF Generator operation. These properties are present in cli_propertyFile_pdfg_template.txt

Property

Values

Description

LCHost

String

Hostname where LiveCycle Server is installed.

LCPort

Integer

Port number where LiveCycle application server is configured

LCAdminUserID

String

The user ID to assign to the LiveCycle Administrator user. This User ID is used to login to the Administrator Console.

LCAdminPassword

String

The password to assign to the LiveCycle Administrator user. This password is used to login to the Administrator Console.

LCServerMachineAdminUser

String

The user ID of the Administrator user of the Operation System hosting LiveCycle

LCServerMachineAdminUserPasswd

String

The password of the Administrator user of the Operation System hosting LiveCycle

8.3.8 Configure Connector for IBM Content Manager

Property

Values

Description

LCHost

String

Hostname where LiveCycle Server is installed.

LCPort

Integer

Port number where LiveCycle application server is configured

LCAdminUserID

String

The user ID to assign to the LiveCycle Administrator user. This User ID is used to login to the Administrator Console.

LCAdminPassword

String

The password to assign to the LiveCycle Administrator user. This password is used to login to the Administrator Console.

jndiPortNumber

String

JNDI port corresponding to LiveCycle application server.

jboss.clientjar.location

String

The location of the jbossall-client.jar file (JBoss only)

CDVTopology.appserverrootdir

String

The root directory of the application server instance that you are configuring on a remote server (on which you plan to deploy LiveCycle)

ConfigureIBMCM

true or false

Specify true to configure Connector for IBM Content Manager

IBMCMClientPathDirectory

String

Location of IBM Content Manager client installation directory.

DataStoreName

String

Name of the DataStore of IBM Content Manager Server that you want to connect to

IBMCMUsername

String

The user name assign to the IBM Content Manager Administrator user. This User ID is used to login to the IBM Content Manager.

IBMCMPassword

String

The password to assign to the IBM Content Manager Administrator user. This password is used to login to the IBM Content Manager.

ConnectionString

String

Additional arguments used in the connection string to connect to IBM Content Manager(Optional).

8.3.9 Configure Connector for IBM FileNet

Property

Values

Description

LCHost

String

Hostname where LiveCycle Server is installed.

LCPort

Integer

Port number where LiveCycle application server is configured

LCAdminUserID

String

The user ID to assign to the LiveCycle Administrator user. This User ID is used to login to the Administrator Console.

LCAdminPassword

String

The password to assign to the LiveCycle Administrator user. This password is used to login to the Administrator Console.

jndiPortNumber

String

JNDI port corresponding to LiveCycle application server.

jboss.clientjar.location

String

The location of the jbossall-client.jar file (JBoss only)

CDVTopology.appserverrootdir

String

The root directory of the application server instance that you are configuring on a remote server (on which you plan to deploy LiveCycle)

ConfigureFilenetCE

true or false

Specify true to configure Connector for IBM Filenet

FilenetConfigureCEVersion

String

The FileNet client version to configure. Specify FilenetClientVersion4.0 or FilenetClientVersion4.5

FilenetCEClientPathDirectory

String

Location of IBM Filenet Content Manager client installation directory.

ContentEngineName

String

Hostname or IP address of the machine where IBM Filenet Content Engine is installed

ContentEnginePort

String

The port number used by IBM Filenet Content Engine

CredentialProtectionSchema

CLEAR or SYMMETRIC

Specify the level of protection.

EncryptionFileLocation

String

Location of the encryption file. This is required only when you select SYMMETRIC option for CredentialProtectionSchema attribute.

Use a forward slash (/) or double backward slashes (\\) as a path seperator.

DefaultObjectStore

String

Name of the ObjectStore for the Connector for IBM Filenet Content Server.

FilenetContentEngineUsername

String

The user ID to connect to the IBM FileNet Content server.

The user ID with read-access privileges would be allowed to connect to the Default object Store.

FilenetContentEnginePassword

String

The password to assigned to the IBM FileNet user. This password is used to connect to Default object Store.

ConfigureFilenetPE

true or false

Specify true to configure Connector for IBM FileNet

FilenetPEClientPathDirectory

String

Location of IBM FIleNet client installation directory

FilenetProcessEngineHostname

String

Hostname or IP address of the process router.

FilenetProcessEnginePortNumber

Integer

Port number for IBM FileNet Content Server

FilenetPERouterURLConnectionPoint

String

Name of the process router.

FilenetProcessEngineUsername

String

The user ID to connect to the IBM FileNet Content Server

FilenetProcessEnginePassword

String

The password to connect to the IBM FileNet Content Server

8.3.10 Configure Connector for EMC Documentum

Property

Values

Description

LCHost

String

Hostname where LiveCycle Server is installed.

LCPort

Integer

Port number where LiveCycle application server is configured

LCAdminUserID

String

The user ID to assign to the LiveCycle Administrator user. This User ID is used to login to the Administrator Console.

LCAdminPassword

String

The password to assign to the LiveCycle Administrator user. This password is used to login to the Administrator Console.

jndiPortNumber

String

JNDI port corresponding to LiveCycle application server.

jboss.clientjar.location

String

The location of the jbossall-client.jar file (JBoss only)

CDVTopology.appserverrootdir

String

The root directory of the application server instance that you are configuring on a remote server (on which you plan to deploy LiveCycle)

ConfigureDocumentum

true or false

Specify true to configure Connector for EMC Documentum

DocumentumClientVersion

String

The EMC Documentum client version to configure. Specify DocumentumClientVersion6.0 or DocumentumClientVersion6.0

DocumentumClientPathDirectory

String

Location of EMC Docum,entum client installation directory

ConnectionBrokerHostName

String

Hostname or IP address of the EMC Documentum Content Server.

ConnectionBrokerPortNumber

String

Port number for EMC Documentum Content Server

DocumentumUsername

String

The user ID to connect to the EMC Documentum Content Server.

DocumentumPassword

String

The password ID to connect to the EMC Documentum Content Server.

DocumentumDefaultRepositoryName

String

Name of the default repository of MC Documentum Content Server

8.3.11 Configure Connector for Microsoft SharePoint

Property

Values

Description

LCHost

String

Hostname where LiveCycle Server is installed.

LCPort

Integer

Port number where LiveCycle application server is configured

LCAdminUserID

String

The user ID to assign to the LiveCycle Administrator user. This User ID is used to login to the Administrator Console.

LCAdminPassword

String

The password to assign to the LiveCycle Administrator user. This password is used to login to the Administrator Console.

jndiPortNumber

String

JNDI port corresponding to LiveCycle application server.

jboss.clientjar.location

String

The location of the jbossall-client.jar file (JBoss only)

CDVTopology.appserverrootdir

String

The root directory of the application server instance that you are configuring on a remote server (on which you plan to deploy LiveCycle)

ConfigureSharePoint

true or false

Specify true to configure Connector for Microsoft SharePoint

SharePointServerAddress

String

Hostname or IP address of the Sharepoint Server

SharePointUsername

String

The user ID to connect to the Sharepoint Server

SharePointPassword

String

The password to connect to the Sharepoint Server

SharePointDomain

String

The Domain Name of the Sharepoint Server

SharePointVersion

String

The version of the Microsoft Sharepo installed for LiveCycle.

ConnectionString

String

Additional arguments used in the connection string to connect to the Sharepoint Server(optional

8.3.12 Command Line Interface Usage

Once you have configured your property file, you must navigate to the [LiveCycle root]/configurationManager/bin folder.

To view a complete description of the Configuration Manager CLI commands, type: ConfigurationManagerCLI help <command name>.

Configure LiveCycle CLI usage

The Configure LiveCycle operation requires the following syntax:

configureLiveCycle -f <propertyFile>

Where:

  • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

Extract CRX Bundles in LiveCycle

The Configure CRX Repository requires the following syntax:

extractCRXInstallationContent [- crx_password<password>] -f <propertyFile>

Where:

  • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

Configure Correspondence Management

The Configure CRX Repository requires the following syntax:

configureCRXRepository -f <propertyFile>

Where:

  • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

8.3.12.1 Configure LiveCycle CLI Usage

The Configure LiveCycle operation requires the following syntax:

configureLiveCycle -f <propertyFile>

Where:

  • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

8.3.12.2 Configure the Application Server CLI Usage

The Configure Application Server operation requires the following syntax:

configureApplicationServer -targetServer_AdminPassword <password> -f <propertyFile> [-skip <configurationsToSkipList>]

Where:

  • -targetServer_AdminPassword <password>: Allows you to set the Administrator password on the command line. If this argument is present, it will override the targetServer_AdminPassword property in the property file.

  • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

  • -skip <configurationsToSkipList>: This is an optional parameter which allows you to list the application server components you do not want to configure. Specify the excluded components in a comma separated list. Valid options are Datasource or Core.

8.3.12.3 (WebSphere and Weblogic Only) Deploy LiveCycle CLI Usage

The Deploy LiveCycle operation requires the following syntax:

deployLiveCycle -f <propertyFile>

Where:

  • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.
    Important: You must restart your application server after you complete Deploy LiveCycle operation.

8.3.12.4 Initialize LiveCycle CLI Usage

The initialize LiveCycle operation requires the following syntax:

initializeLiveCycle -f <propertyFile>

Where:

  • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

8.3.12.5 Deploy LiveCycle Components CLI Usage

The Deploy LiveCycle Components operation requires the following syntax:

deployLiveCycleComponents -f <propertyFile> -LCAdminPassword <password>

Where:

  • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

  • -LCAdminPassword <password>: Allows you to set the Admin password on the command line. If this argument is present, it will override the targetServer.adminPassword property in the property file.

8.3.12.6 Validate Application Server Topology CLI Usage

The Validate Application Server Topology operation is optional and requires the following syntax:

validateApplicationServerTopology -f <propertyFile> -targetServer_AdminPassword <password>

Where:

  • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

  • -targetServer_AdminPassword <password>: Allows you to set the Admin password on the command line. If this argument is present, it will override the targetServer.adminPassword property in the property file.

8.3.12.7 Validate database connectivity CLI Usage

The validate Database Connectivity operation is optional and requires the following syntax:

validateDBConnectivity -f <propertyFile> -datasource_dbPasssword <password>

Where:

  • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

  • -datasource_dbPassword <password>: Allows you to set the database user password on the command line. If this argument is present, it will override the datasource.dbPassword property in the property file.

8.3.12.8 Validate Application Server Configurations CLI Usage

The Validate Application Server Configurations operation is optional and requires the following syntax:

validateApplicationServerConfigurations -f <propertyFile> -targetServer_AdminPassword <password>

Where:

  • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

  • -targetServer_AdminPassword <password>: Allows you to set the Admin password on the command line. If this argument is present, it will override the targetServer.adminPassword property in the property file.

8.3.12.9 Validate LiveCycle Server CLI Usage

The Validate LiveCycle Server operation is optional and requires the following syntax:

validateLiveCycleServer -f <propertyFile> -LCAdminPassword <password>

Where:

  • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

  • -LCAdminPassword <password>: Allows you to set the Admin password on the command line. If this argument is present, it will override the targetServer.adminPassword property in the property file.

8.3.12.10 Validate LiveCycle Component Deployment CLI Usage

The Validate LiveCycle Component Deployment operation is optional and requires the following syntax:

validateLiveCycleComponentDeployment -f <propertyFile> -LCAdminPassword <password>

Where:

  • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

  • -LCAdminPassword <password>: Allows you to set the Admin password on the command line. If this argument is present, it will override the targetServer.adminPassword property in the property file.

8.3.12.11 Check system readiness for PDF Generator

The Checking system readiness for PDF Generator operation requires the following syntax:

pdfg-checkSystemReadiness

8.3.12.12 Adding administrator user for PDF Generator

The adding administrator user for PDF Generator operation requires the following syntax:

pdfg-addAdminUser -f <propertyFile>

Where:

  • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

8.3.12.13 Configure Connector for IBM Content Manager

The Configure Connector for IBM Content Manager operation is optional and requires the following syntax:

IBMCM-configurationCLI -f <propertyFile>

Where:

  • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

    Important: Modify the <propertyFile> called cli_propertyFile_ecm_ibmcm_template.txt located in the [LiveCycle root]\configurationManager\bin\ directory.

Perform the following steps manually to complete the configuration for Connector for IBM Content Manager.

  1. Copy the adobe-component-ext.properties file from [LiveCycle root]/configurationManager/configure-ecm/websphere to the following [appserver root]/profiles/[profile_name] directory.

  2. Restart the Application Server.

  3. Start the following services from LiveCycle Administration Console
    • IBMCMAuthProviderService

    • IBMCMConnectorService

8.3.12.14 Configure Connector for IBM FileNet

The Configure Connector for IBM FileNet operation is optional and requires the following syntax:

filenet-configurationCLI -f <propertyFile>

Where:

  • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

    Important: Modify the <propertyFile> called cli_propertyFile_ecm_filenet_template.txt located in the [LiveCycle root]\configurationManager\bin\ directory.

Perform the following steps manually to complete the configuration for Connector for IBM Content Manager.

  1. Copy the adobe-component-ext.properties file from [LiveCycle root]/configurationManager/configure-ecm/websphere to the following [appserver root]/profiles/[profile_name] directory.

  2. Locate the wsjass.conf file in the [appserver root]/profiles/[profile name]/properties directory and add to it contents of wsjass.conf file available in [LiveCycle root]/configurationManager/configure-ecm/websphere directory.

  3. (Only for FileNet 4.x) Add the Java option -Dwasp.location=[FileNetClient root]/wsi to the Application Server startup options.

  4. Restart the Application Server.

  5. Start the following services from LiveCycle Administration Console
    • IBMFileNetAuthProviderService

    • IBMFileNetContentRepositoryConnector

    • IBMFileNetRepositoryProvider

    • IBMFileNetProcessEngineConnector(If configured)

8.3.12.15 Configure Connector for EMC Documentum

The Configure Connector for EMC Documentum operation is optional and requires the following syntax:

documentum-configurationCLI -f <propertyFile>

Where:

  • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

    Important: Modify the <propertyFile> called cli_propertyFile_ecm_documentum_template.txt located in the [LiveCycle root]\configurationManager\bin\ directory.

Perform the following steps manually to complete the configuration for Connector for EMC Documentum.

  1. Copy the adobe-component-ext.properties file from [LiveCycle root]/configurationManager/configure-ecm/websphere to the following [appserver root]/profiles/[profile_name] directory.

  2. Restart the Application Server.

  3. Start the following services from LiveCycle Administration Console
    • EMCDocumentumAuthProviderService

    • EMCDocumentumRepositoryProvider

    • EMCDocumentumContentRepositoryConnector

8.3.12.16 Configure Connector for Microsoft SharePoint

The Configure Connector for Microsoft SharePoint operation is optional and requires the following syntax:

sharepoint-configurationCLI -f <propertyFile>

Where:

  • -f <propertyFile>: A property file containing the required arguments. For more information on creating a property file, see Command Line Interface property file.

    Important: Modify the <propertyFile> called cli_propertyFile_ecm_sharepoint_template.txt located in the [LiveCycle root]\configurationManager\bin\ directory.

8.4 Examples Usage

From the C:\Adobe\Adobe LiveCycle ES3\configurationManager\bin, type:

ConfigurationManagerCLI configureLiveCycle -f cli_propertyFile.txt

Where cli_propertyFile.txt is the name of the property file you created.

8.5 Configuration Manager CLI Logs

If an error occurs, you can review the CLI logs located here in the [LiveCycle root]\configurationManager\log folder. The log file generated will have a naming convention such as lcmCLI.0.log where the number in the filename (0) will increment when the log files are rolled over.

8.6 Next steps

If you used Configuration Manager CLI to configure and deploy LiveCycle, you can now do the following tasks:

// Ethnio survey code removed