[Preferences]

To enable the FDK client programs, set the API flag to On.

When this flag is set to On, FrameMaker displays the OK to Exit FrameMaker? dialog box.

Log / stop logging errors in the file ErrorFileName (for Off the console window is not displayed)

FrameMaker creates this file on every launch. This file stores console error and warning messages.

Specify a point size at which the text displayed on the screen is grayed out.

Set this flag to decide whether FrameMaker preserves unavailable fonts’ names. When this flag is set to On, FrameMaker remembers missing fonts’ names and replaces the relevant text with different fonts. When missing fonts are available again, such as on a different computer or after installation, FrameMaker uses the correct fonts again.

List the FrameMaker plugins here.

API coverage file name. FrameMaker uses this file on shut down to store the coverage.

Extension for executable plugins.

When you use the Fit Windows® to Text Frame option in the Zoom pop-up menuand then change the zoom level, this flag determines whether the window resizes to fit the changed zoom level or not. When you set this flag to On and then change the zoom level, FrameMaker does not resize the document window.

This flag decides whether to alert you that the filenames you are saving may be illegal on one or more platforms. These problems are about prohibited characters or length of the filenames.

Default settings: Windows® 9x/2000/NT

In FrameMaker 5.5.6 and later, this flag allows control of the display and printing of library colors. The four settings you can use with this option are:

• Printing: (Default option) Displays the RGB values from the library color description and prints the RGB values converted from CMYK values.

• None: Displays and prints the RGB values from the library color description.

• Printing&Screen: Displays and prints the RGB values converted from CMYK values.

• Screen: Displays the converted RGB values and prints the RGB values from the library color description.

These options are for RGB printing only. The CMYK option always uses CMYK colors.

Not supported in FrameMaker 11.

Set this flag as On to use a custom system cursor instead of the built-in FrameMaker cursor. When you set this flag to On, FrameMaker uses the OS cursors for mouse actions such as Rotate or Drag.

Set this flag as On to create backup file when you save a file.

Number of minute after which FrameMaker automatically creates a backup file for the active file.

This flag controls whether a FrameImage facet is saved with imported graphics by default. The default value is off.

If this flag is set to On, FrameMaker creates a lock file (.lck extension) for an open file. The lock file prevents another user from opening and editing the same file. Another user, however, can view a read-only copy of an open file.

Typing text in Asian fonts is accomplished using a special input device. FrameMaker can recognize when you are typing an Asian font and load this device automatically. By default, this flag is set to On. If you set this flag to Off, use the appropriate command to load the input device.

Last view, XML, Author, or WYSIWYG, active when user exited the FM session.

Whether or not to retain the invalid xml in the temp directory while saving an XML file. The user may want to see the temp file for errors.

Set this flag to On to paste conditional content using the destination document’s settings.

Global file path to read XML attributes.

Set this flag to On to apply conditional text to complete elements rather than part text inside the element.

When this flag is set to On, FrameMaker creates all the possible named (all paragraphs and elements) destinations. The On or Off value you set here is used a default value for the "Create all named destinations" option in the PDFSetup dialog.

Set this flag to On to align new or moved graphics to snap grid.

When you set this flag to On, gravity is enabled. Gravity ensures perfect alignment when drawing or resizing an object.

The EPSLevelForPlacedPdf specifies the level of EPS to use for placed PDF images. By default, FrameMaker prints imported PDF (Placed PDF) files by converting them to Level 2 EPS files. Use this setting to specify Level 1 or Level 2.

If your keyboard does not have an Alt Gr key and you need it, set this flag as On. Now, you can use the Ctrl and Alt keys together to achieve the same.

Structure window zoom value.

Structure window element font for Japanese.

Structure window element font for Korean.

Structure window element font for traditional Chinese.

Structure window element font for simplified Chinese.

Yes enables recording “undo” history in FDK APIs. Turn this option Off to improve performance of certain FDK clients.

This flag controls whether or not FrameMaker displays "history will be cleared, can't undo" alert.

If this flag is set as On, FrameMaker clears the history on save.

Size of undo list.

Allow/disable import of file Info.

Set this flag to On, to hide the FrameMaker welcome screen.

When this flag is set to On, the Flash (SWF file) content in a FrameMaker document becomes inactive in PDF. When this flag is set to Off, SWF files get embedded in the PDF and are playable.

When this flag is set to On, the U3D content in a FrameMaker document becomes inactive in PDF. When this flag is set to Off, U3D objects get embedded in the PDF.

When this flag is set to On, when you save a FrameMaker file as PDF, the TIFF, PSD, and JPEG images in the documents are converted to EPS.

When this flag is set to On, after the sorting of tags, the tags starting with symbols would appear before tags with alphanumeric initials.

FrameMaker stores imported images as temporary files. If you import a file for the second time, the file is not downloaded again. After importing an image file into FrameMaker, the changes that you make in the file are not reflected in FrameMaker until you delete the temporary file and reimport the image file.

To avoid having to delete the temporary file, set the AlwaysDownloadURL flag to On.

When this flag is set to On, FrameMaker indicates the location of the object such as (variable, marker, or conditional).

Related flags:

• LocParaStyle1

• LocParaStyle2

• LocElementType1

• LocElementType2

When you set LocDisplayCriteria, as On, use this flag to specify first column’s title as para style’s name in Pods. Default value is Heading1. This flag is relevant to Unstructured FrameMaker. For more information on Pods, see FrameMaker Help.

When you set LocDisplayCriteria, as On, use this flag to specify second column’s title as para style’s name in Pods. Default value is Heading2. This flag is relevant to Unstructured FrameMaker. For more information on Pods, see FrameMaker Help.

When you set LocDisplayCriteria, as On, use this flag to specify first column’s title as element name in Pods. Default value is Element1. This flag is relevant to Structured FrameMaker. For more information on Pods, see FrameMaker Help.

When you set LocDisplayCriteria, as On, use this flag to specify second column’s title as element name in Pods. Default value is Element2. This flag is relevant to Structured FrameMaker. For more information on Pods, see FrameMaker Help.

If you have memory issues when doing replace all/replace in a book, or during similar operations, reduce the replace cache size from the default 200.

The code points between the start and end (inclusive) are treated as roman code range (While rendering text, FrameMaker does not apply CJK rules to these ranges ).

If set, checkout http files on open.

If set, upload http files on save.

Name of the Last Used WorkSpace in the structured mode.

Name of the Last Used WorkSpace in the unstructured mode.

The number of seconds to wait when connecting to the webdav server.

When this flag is set to On, FrameMaker hides child elements are also hidden along with parent element.

This flag is for internal use only. Do not modify.

Whether or not to validate the file after “post close” XSLT is applied on XML.

Whether to allow saving a file with invalid XML or not.

On file open, suppress XML parser validation warnings.

When this flag is set to Yes, FrameMaker converts multiple contiguous white spaces to a single one. This option is useful while opening pretty printed (nested code) files.

Depreacted

If this flag is set to Off, FrameMake does not embed multimedia in the PDF.

When this flag is set to On, FrameMaker displays only the file references in the Ditamap view. FrameMaker does not display the metadata elements as they are not file reference nodes.

When this flag is set to On, FrameMake displays the nav title element in the Ditamap view.

If this flag is turned On, while saving the XML files FrameMaker preserves the OLE objects (does not convert into a MIF reference). For more information on direct OLE support in XML, see FrameMaker Help.

Enter a value to limit the number of rows in the multimedia link table. This table is relevant when you create links to a graphic/multimedia in FrameMaker 11. It is possible for a graphic/multimedia object to have hundreds of parts. Default value for this flag is 100. For more information on multimedia links table, see FrameMaker Help.

To enable the FDK client programs, set the API flag to On.

The zoom percent levels in the Zoom menu.

Default settings: 25, 50, 80, 90, 100, 120, 140, 150, 160, 200

Possible values: 25-1600

Pen widths in points (pt) for that appear in the Line Widths pop-up menu in the Tools palette. These values are updated every time you exit FrameMaker, using the current settings in the Line Widths pop-up menu.

Default settings: 0.5, 1.0, 3.0, 4.0

Possible values: 0.15-360

Relevant user interface dialog: Line Width Options (Launched from the graphics toolbar)

Use this flag to control the clipboard paste options. You can tweak this flag’s values to ensure when you paste from Microsoft® applications to FrameMaker, the pasted text appears as text, unicode text, OLE object, or any other format.

Default settings: FILE, MIFW, MIF, RTF, OLE 2, META, EMF, DIB, BMP, UNICODE TEXT, TEXT

Possible values: You can change the order of the values.

Specify the size of your monitor, so that the document and dimensions you see on the screen (such as margins and objects) are very close to their actual size.

The General settings in the Preferences dialog have an option Monitor Size.

Sample Value: 17in

Include a unit of mesasure such as in, “, or cm, with the value.

This flag determines if mnemonic command shortcuts are shown on menus. Mnemonic shortcuts are underlined letters in command labels. When a menu is open, you can choose a command by typing the underlined letter (for example, the O underlined in the Open command on the File menu).

Possible values: On and Off

This flag controls how long, in miliseconds, you must hold down the mouse button for pop-up menus, such as the Zoom menu, to open. The preset value, 500, specifies an interval similar to that for opening menus in the menu bar.

When this flag is set to On, the default display units for the ruler, grid, and snap are based on the document template. When this flag is set to Off, the values are taken from the ini file itself.

When getting the facet from PDF, limit the number of pixels we use in rasterizing.

Values in inches for the tick marks on the vertical and horizontal rulers in new documents. This setting is applied only when UseDisplayUnitInTemplate is set to Off. Otherwise, FrameMaker uses the values in the template.

Values in centimeters for the tick marks on the vertical and horizontal rulers in new documents. This setting is applied only when UseDisplayUnitInTemplate is set to Off. Otherwise, FrameMaker uses the values in the template.

Values in inches for spacing of the visible grid lines in new documents. This setting is applied only when UseDisplayUnitInTemplate is set to Off. Otherwise, FrameMaker uses the values in the template.

Values in centimeters for spacing of the visible grid lines in new documents. This setting is applied only when UseDisplayUnitInTemplate is set to Off. Otherwise, FrameMaker uses the values in the template.

Value in inches for the spacing of the snap grid lines in new documents. This setting is applied only when UseDisplayUnitInTemplate is set to Off. Otherwise, FrameMaker uses the values in the template.

Values in centimeters for the spacing of the snap grid lines in new documents. This setting is applied only when UseDisplayUnitInTemplate is set to Off. Otherwise, FrameMaker uses the values in the template.

Set this option to On to use FrameMaker’s built-in methods of generating PostScript code. This option is faster and of higher quality. Set this option to Off to standard Windows® methods to generate standard postscript code. Using this method, FrameMaker creates preview image of EPS graphics instead of the PostScript image.

FrameMaker has two built-in sets of menus for each product interface (FrameMaker and Structured FrameMaker). Complete menus are the menus and commands as described in the FrameMaker User Guide and in online Help. Quick menus are a subset of complete menus. You can also create your own custom menu set. The MenuSet setting defines which set of menus appears when you start. By default, the Complete menu set is used.

Possible values: Complete, Quick, and Custom

If you set ConfigWarnKbdRedundant to On, you see warning messages in the console window when you load the customization (*.cfg) file if it contains redundant shortcut definitions.

If you set ConfigWarnKbdOverride to On, you see warning messages when you load the customization file if it contains shortcut definitions for commands that already have shortcuts defined for them. The warning messages appear in the console window.

First file to be opened in FrameMaker during the first launch.

Set this flag to On, to display splash screen on FrameMaker launch. Default is On.

Set this flag to On to display an alert when FrameMaker cannot write/update the maker.ini file. Default is On.

Set this flat to On to suppress the missing font dialog when you open a document. Default is Off.

Set this flag to On to suppress alerts when opening document about some of the languges used in the document aren't available with FM. Default is Off.

Path of the Pantone Color Library cvc file. Default is fminitpantone.cvc.

Set this flat to On, to display the Unknown File Type dialog every time you try to open an unknown file type in FrameMaker. The Unknown File Type dialog gives you an option to convert some file types, such as Excel, Word, and Text, to a FrameMaker file. If you set this flag to Off, FrameMaker displays the message “Cannot open the file.”

Default is Off.

The SuppressExtensions setting controls which file extensions are suppressed when suppression is enabled. By default, only .fm and .book extensions are suppressed. If you want to disable all file extension suppression, you can either disable extension suppression in the shell or edit SuppressExtensions to have a blank value.

Use this flag to specify the font name of the structure window element.

Use this flag to specify the font size of the structure window element.

Structure window attribute font name.

Structure window attribute font size.

Structure window attribute value font name.

Structure window attribute value font size.

Structure window keyword font name.

Structure window keyword font size.

Structure window attribute error symbol.

Structure window attribute separator symbol.

Structure window expand symbol.

Structure Window collapse symbol.

Structure window attribute none symbol.

Structure window attribute some symbol.

Structure window attribute all symbol.

Japanese imperial era date strings. Enter the date in the following format: DD MM YY Name | DD MM YY Name | DD MM YY Name |. The most recent era should come first followed by older ones. The last item is the era after "Heisei" era.

When this flag is set to On, FrameMaker displays the filename in the title of the document or book window before the path.

Set this flag to 2 to convert wmf to emf during printing.

Plugin directory cache. Specify the directory for FrameMaker plugins.

Font directory cache. This file will cache the information FrameMaker stores in the SBX files. On startup, FrameMaker reads the info from the cached file instead of opening and reading each file every time.

If this flag is set to On, when a pod is in iconic mode, clicking the icon of the pod in FrameMaker opens the pod. When focus goes away from the pod it collapses to an icon.

If this flag is set to On, in the full screen mode of FrameMaker, the pods and toolbars appear in a thin dark-grey strip. Hovering over these pods and toolbars shows the pods and toolbars.

When you close pods they are hidden but are still active in the memory and may affect FrameMaker’s performance. If you set this flag to Off, FrameMaker removes the pods when you close them. To display them again, choose them from the FrameMaker menus.

Relevant user interface dialog: Preferences dialog (Edit > Preferences)

Set this flag to On to enable displaying documents as tabs in FrameMaker.

If this flag is set to On, when a floating document is solo, its single tab is not shown.

Set this flag to On to preven document tabbing while dragging.

Set this flag to On to allow opening composite documents as tabs.

Set this flag to Normal, Fast, or Hidden to define the tooltip appearance mode.

FrameMaker UI brightness: light or dark.

Whether to use greyscale application icon or not.

Limit of recent files list.

Enable/disable auto spell check.

Enter the name of the file to be used as a poster if the actual poster is not valid/readable.

By default this entry is set to ON. Set this entry to OFF to disable the repeat typing operation.

Enable/disable repeat last executed command.

Optimize handling of OLE objects.

Show/hide the following options in the manage attribute expressions dialog:

• Ditaval as condition

• Apply condition tag

• Remove if previously applied

Not processed for FrameMaker 11.

If this flag is set to On, FrameMaker displays the Unresolved Cross references dialog box while opening a document that has unresolved cross references.

If this flag is set to On, FrameMaker displays an alert while opening an older release document.

When this option is set to On, if there are unsupported hotspot shapes in an fm file, FrameMaker displays the Unsupported Hotspot Shapes dialog when generating PDF.

If this flag is set to On, FrameMaker displays an alert while opening a document with unavailable fonts.

If this flag is set to On, FrameMaker displays an alert while opening a document if the FrameMaker current session’s dictionary provider does not match the document’s dictionary provider.

Whether to show learning resources on the welcome screen.

The list of script which you do not want to load on start up.

If the last FrameMaker session ended in a crash and it can be restored, then on the next FrameMaker session launch ask if user wants to restore session.

If the flag is set to ON, the FrameMaker 11 Smart Insert functionality is enabled. Default: OFF.

Display the last used workspace in the FrameMaker XML Author mode.

Display the last active view in FrameMaker XML Author mode.

Suppress the alert that is displayed while opening a file format that is not supported in the current mode.

Suppress the alert that is displayed while opening a file format that is not supported in the current view.

Open a document that is dragged on to the document window.

Set the initial (default) value for runaround style of an image when the image is inserted in a FrameMaker document. Possible values:

• Contour

• BoundingBox

• None

Specify the engine to use in regular expression search and replace. Possible options:

• egrep

• grep

• Perl

Set the flag to ON to load the fonts in the adobe directory on start up. Default: OFF.

Set the flag to ON to load the ExtendScripts on start-up. Default: OFF.

Set to ON to load all clients in idle loops after FrameMaker launches. Default: OFF.

Specify the size of toolbar icons. Possible values:

• Large

• Small

Specify the color option of toolbar icons. Possible values:

• Colored

• Monochrome

When this flag is set to On, FrameMaker uses Smart Paste if you copy and paste content from external applications such as MS Word, Excel, or a browser. If the flag is set Off, the content from external applications is pasted as plain text.

When this flag is on, if an object is placed 10 px from the left margin, changing the direction (RTL – LTR) will cause the object to be placed 10 px from the right margin. However, the orientation of the object remains the same.

When this flag is on, if an object is placed 10 px from the left margin, changing the direction (RTL – LTR) will cause the object to be placed 10 px from the right margin. The orientation of the object is flipped (mirrored).